Akira Baba, Futao Kaneko, Rigoberto C. Advincula, Wolfgang Knoll: Evaluation of Organic Thin Films Utilizing Surface Plasmon Excitation. In: Molecular Electronics and Bioelectronics. 11, 2000, p. 159 - 166.

Akira Baba, Rigoberto C. Advincula, Wolfgang Knoll: Electropolymerization Process of Aniline: Investigations Using Surface Plasmon Optical Techniques. In: Polymeric Materials: Science and Engineering Reprints. 84, 2001, p. 369 - 370.

Dinghua Bao,Sung Kyun Lee, Xinhua Zhu, Marin Alexe, Dietrich Hesse: Growth, structure, and properties of all-epitaxial ferroelectric (Bi,La)4Ti3O12/Pb(Zr,Ti)O3/(Bi,La)4Ti3O12 trilayered thin films on SrRuO3-covered SrTiO3(011) substrates. In: Applied Physics Letters. 86, 2005, p. 082906-1 - 082906-3 [applied physics, ferroelectric thin film].

X.H.Zhu,D.H.Bao,M.Alexe,D.Hesse: Morphology and microstructure of all-epitaxial ferroelectric tri-layered (Bi,La)4Ti3O12/Pb(Zr,Ti)O3/(Bi,La)4Ti3O12 thin films on SrTiO3(011). In: Applied Physics A: Materials Science & Processing. 80, 2005, p. 739 - 742 [microstructure, applied physics, ferroelectric film].

Dinghua Bao, Xinhua Zhu, Marin Alexe, Dietrich Hesse: All-Epitaxial Trilayered Ferroelectric (Bi,La)4Ti3O12/Pb(Zro.4Ti0.6)O3/(Bi,La)4Ti3O12 Thin Films on SrTiO3 Substrates ba Pulsed Laser Deposition. In: Japanese Journal of Applied Physics. 44, 9B, 2005, p. 6910 - 6913 [ferroelectric; trilayered thin films; epitaxial growth; orientation; fatique-free].

Subramshu S. Bhattacharya, Ulrich Betz, Horst Hahn: On the Devolopment of a Low Temperature, Superplastic Nanocrystalline 5 Mol.% Yttria Stabilised Zirconia: Synthesis, Processing and Mechanical Characterisation. In: Material Science Forum. 343-346, 2000, p. 539 - 544 [Inert Gas Condensation, Nanocrystalline, Superplasticity, Yttria-Stabilized Zirconia].

S. Boskovic, D. Kosanovic et al.: Synthesis of Si3N4-celsian composite materials. In: Ceramics Int.. 26, 2000, p. 33 - 37.

Snezana Boskovic, Feodor Sigulinski, Georg Rixecker, Fritz Aldinger: Ceramics in Si3N4-ZrO2-CeO2 System: Phase Compsition Changes and Properties. In: Z. Metallkd.. 92, 8, 2001, p. 942 - 945.

Snezana Boskovic, Dj. Kosanovic, S. Zec: Densification and Phase Transformation of Si3N4 in the Presence of Mechanically Activated BaCO3-Al2O3-SiO2 Mixture. In: Powder Technology. 120, 2001, p. 194 - 198.

Zorana Dohcevic, Branko Matovic, Snezana Boskovic, Zoran Popovic: Optical and structural characterization of laser-synthesized ultrafine Si-C-N powders. In: Philosophical Magazine A. 82 No. 1, 2002, p. 93 - 105.

Lj. M. Zivkovic, Z. S. Nikolic, Snezana Boskovic: Electrical Properties and Percoaltion Concentration in Si3N4-TiN Composites. In: Key Engineering Materials. 206-213, 2002, p. 1489 - 1492.

Lj.Zivkovic, Z.Nikolic, S.Boskovic, M.Miljkovic : Microstructural Characterization and Computer Simulation of Conductivity in Si3N4-TiN Composites . In: J.Alloys and Compounds . 373, 2004, p. 231 - 236 [non oxide ceramic composites, electrical conductivity, percolation concentration].

D.Bucevac, S.Boskovic, M.Vlajic, V.Krstic: Microstructure and Toughness of Seeded Hot-Pressed Si3N4 Ceramics. In: J.Materials Science and Technology. 20, 2004, p. 241 - 244 [silicon nitride, fracture toughness, beta seeds].

Snezana Boskovic, Slavica Zec: CE SILICATES FORMATION FROM MECHANICALLY ACTIVATED OXIDE MIXTURES . In: J.Materials Science. 39, 39, 2004, p. 5283 - 5286 [mechanochremistry, cerium silicate formation, reaction course].

Snezana Boskovic, D.Djurovic, Z.Dohcevic-Mitrovic, Z.Popovic, M.Zinkevich, F. Aldinger: Self Propagating room temperature synthesis of nanopowders for SOFC. In: Journal of Power Sources. 145, 2005, p. 237 - 242 [doped ceria, rare earths, solid oxide fuel cell].

Aleksandra Vuckovic, Snezana Boskovic, M. Vlajic and V. Krstic: Effect of Beta-Si3N4 Seeds on the Densification and the Fracture Toughness of Silicon Nitride. In: Ceramics International. 32, 3, 2006, p. 303 - 307 [densification, Si3N4, composites,sintering].

S.Zec, S. Boskovic, N.Popovic, Z. Bogdanov: Low Temperature Ce2Si2O7 Polymorph formed by mechanical activation. In: Materials Chemistry and Physics. 95, 2006, p. 150 - 153 [Ce2Si2O7, reaction , mechanical activation].

Z. D. Dohcevic-Mitrovic, M. J. Scepanovic, M. U. Grujic-Brojcin, Z. V. Popovic, S. B. Boskovic, B. M. Matovic, M. V. Zinkevich and F. Aldinger : The size and strain effects on the Raman spectra of Ce1-xNdxO2-delta (x=0-0.25) nanopowder . In: Solid State Communications. 137, 2006, p. 387 - 390 [Ce1-xNdxO2-delta, nanostructured solid solutions, Raman spectroscopy].

Snezana B. Boskovic, Branko Z. Matovic, Milan D. Vlajic and Vladimir D. Kristic: Modified Glycine Nitrate Procedure (MGNP) for the Synthesis of SOFC Nanopowders . In: Ceramics International. 33, 2007, p. 89 - 93 [modification of GNP, perovskites, nanopowders, properties].

S. Zec, S. Boskovic, M. Hrovat, M. Kosec : Contribution to Phase Equilibria in the Ce2O3 Rich Part of the Ce2O3 - SiO2 - ZrO2 System . In: J.European Ceramic Society. 27, 2007, p. 523 - 526 [Ce2O3 - SiO2 - ZrO2, Phase Equilibria, ceramic systems ].

Slavica Zec, Snezana Boskovic, Nada Popovic, Zarko Bogdanov: Subsolidus phase equilibrium in the CeO2-x - SiO2 - ZrO2 system: Experimental study. In: International Journal of Materials Research (Z.für Metallkunde. 5, 2006, p. 579 - 584 [CeO2-x - SiO2 - ZrO2 system, subsolidus region,].

B. Matovic, G. Rexicker, S. Boskovic and F. Aldinger: Effect of LiYO2 Addition on Sintering Behavior and Mechanical Properties of Silicon Nitride Ceramics . In: Int. J. of Materials Research. 9, 2006, p. 1268 - 1272.

B. Matovic, G. Rexicker, S. Boskovic and F. Aldinger: Sintering of Si3N4 with Li-exchanged zeolite Additive. In: Int. J. of Materials Research. 9, 2006, p. 1264 - 1267 [liquid phase sintering, zeolites, Si3N4, ].

Z D Dohcevic-Mitrovic, M.J.Scepanovic, M.U.Grujic-Brojcin, Z.V.Popovic, S.B.Boskovic, B.M.Matovic, M.V.Zinkevich, F. Aldinger : Ce1-xY(Nd)xO2-ä nanopowders: potential materials for intermediate temperature SOFCs . In: Journal of Physics: Condensed Matter. 18, 2006, p. 2061 - 2068 [Raman spectroscopy, structure,nanometric Ce1-xY(Nd)xO2-ä solid solution].

V. Spasojevic, D. Markovic, V. Kusigerski, B. Antic, S. Boskovic, M. Mitric, M. Vlajic, V. Krstic and B. Matovic : Magnetic properties of nanosized mixed valent manganites CaMnO3 and Ca0.7La0.3Mn1−xCexO3 (x=0; 0.2 . In: J. All. and Comp. . 442, 2007, p. 197 - 199 [ Doped CaMnO3, preparation, magnetic properties].

D. Bucevac, S. Boskovic, B. Matovic, Lj. Zivkovic, M.Vlajic, V. Krstic: Correlation Between Fracture Toughness and Microstructure of Seeded Silicon Nitride Ceramics . In: Journal of Materials Science. 42, 2007, p. 7920 - 7926 [Beta seeds, microstructure, mechanical properties, grain size].

Vladan Kusigerski, Marin Tadic, Vojislav Spasojevic, Bratislav Antic, Dragana Markovic, Snezana Boskovic, Branko Matovic : High coercivity of ã-Fe2O3 nanoparticles obtained by mechanochemically activated solid-state displacement reaction . In: Scripta Materialia. 56, 2007, p. 883 - 886.

Z.Dohcevic-Mitrovic, M.Radovic, M. Scepanovic, M. Grujic-Brojcin, Z. Popovic, B.Matovic, S. Boskovic : Temperature Dependent Raman Study of Ce0.75Nd0.25O2-ä Nanocrystals. In: Applied Physics Letters . 91, 2007, p. 203118-1 - 203118-3 [Nd doped ceria, high temperatur Raman spectra, crystallite size].

B. Matovic, S. Boskovic, Lj.Zivkovic, Z.Yu and V. Krstic: Synthesis and dielectric behavior of lead-free (Na0.5Bi0.5)1-xBaxTi1-yTayO3 piezoelectric Ceramics, . In: J. Optoelectronic& Advanced materials. 9, 9, 2007, p. 2804 - 2808 [Lead free, iezoelectrics, morphotropic phase boundary].

Lj..M.Zivkovic, Z.S.Nikolic, S.B.Boskovic: Electrical Properties and Percoaltion Concentration in Si3N4-TiN Composites. In: Key Engineering Materials. 206-213, 2002, p. 1489 - 1492 [electrical conductivity, TiN network, composites, discharge mashining].

B. Matovic, S. Boskovic, Lj. Zivkovic, M. Vlajic and V. Krstic: Lattice Parameters of Gd-Doped Ceria Electrolytes. In: Materials Science Forum. 494, 2005, p. 175 - 180 [lattice parameter, Vegards law, ion packaging model].

Snezana Boskovic D. Djurovic, B. Matovic, M. Èanèarevic, Z. Dohèevic-Mitrovic, Z. Popovic, M. Zinkevich, F. Aldinger : REACTION OF Ce1-XReXO2-ä NANOPOWDERS SYNTHESIS. In: MATERIALS SCIENCE FORUM. 518, 2006, p. 95 - 100 [self propagating reactions, nanopwder synthesis,Ce1-XReXO2-ä solid solutions].

B. Matovic, A. Saponjic and S. Boskovic: Carbonitriding reactions of diatomaceous earth: phase evolution and reaction mechanisms. In: Journal of the Serbian Chemical Society . 71, 6, 2006, p. 677 - 683 [diatomaceous earth, Si precursor, chemical reaction, nonoxides].

D. Djurovic, M. Zinkevich, S. Boskovic, V. Srot, and F. Aldinger : Densification Behaviour of Nano-Size CeO2. In: Materials Science Forum. 518, 2007, p. 191 - 195 [master sintering curve, oxygen atmosphere, densification mechanisms].

J. Dukic, S. Boskovic, B. Matovic, B. Dimcic, and Lj. Karanovic: Ritveld Refinement of Crystal Phases (Ca1-xLax)MnO3 with Perovskite-Type Structure . In: Materials Science Forum . 518, 2007, p. 233 - 237 [crystalline phases, La content, substitution, perovskites].

Keith J. Bowman: Introduction to Mechanical Behavior of Materials,. New York: Wiley, 2004, 368 pp. [mechanical, dislocation metallurgy, ceramics, mechanics].

C. Popov, M. Jelinek, Silviya Vasileva Boycheva, V. Vorlicek, W. Kulisch: Influence of the Gas Phase Composition on Nanocrystalline Diamond Films Prepared by MWCVD. In: Journal of Metastable and Nanocrystalline Materials . 23, 2005, p. 31 - 34 [Characterization, Microwave Plasma CVD, Nanocrystalline Diamond Films].

C. Popov, W. Kulisch, Silviya Vasileva Boycheva, K. Yamamoto, G. Ceccone, Y. Koga: Structural investigation of nanocrystalline diamond/amorphous carbon composite films. In: Diamond & Related Materials. 13, 2004, p. 2071 - 2075 [Nanocrystalline diamond films; Microwave plasma CVD; Microstructure].

W. Kulisch, C. Popov, G. Silviya Vasileva Boycheva, L. Buforn, G. Favaro, N. Conte: Mechanical properties of nanocrystalline diamond/amorphous carbon composite films prepared by microwave plasma chemical vapour deposition. In: Diamond & Related Materials. 13, 2004, p. 1997 - 2002 [Nanocrystalline diamond films; Microwave plasma CVD; Mechanical properties].

W. Kulisch, C. Popov, Silviya Vasileva Boycheva, G. Beshkov, V. Vorlicek, P. N. gibson, G. Georgiev: Investigation of the growth mechanism and structure of nanocrystalline diamond films by rapid thermal annealing. In: Thin Solid Films. 469-470, 2004, p. 99 - 104 [Nancrystalline diamond; Annealing; Growth mechanism; Structural properties].

Silviya Vasileva Boycheva, A. Krasilnikova Sytchkova, J. Bulir, C. Popov, W. Kulisch, A. Piegari: Optical constants of As2Se3-Ag4SSe-SnTe amorphous thin films. In: Journal of Non-Crystalline Solids. 353, 2007, p. 1618 - 1623 [Chalcogenides, Optical properties, Amorphous thin films].

Silviya Vasileva Boycheva, C. Popov, W. Kulisch, J. Bulir, A. Piegari: Optical properties of Nanocrystalline Diamond/Amorphous Carbon Composite Films. In: Fullerenes, Nanotubes, and Carbon Nanostructures. 13, 2005, p. 457 - 469 [Nanocrystalline diamond, thin films, optical properties].

C. Popov, M. Novotny, M. Jelinek, Silviya Vasileva Boycheva, V. Vorlicek, M. Trchova, W. Kulisch: Chemical bonding study of nanocrystalline diamond films prepared by plasma techniques. In: Thin Solid Films. 506-507, 2006, p. 297 - 302 [Nanocrystalline diamond; Mircrowave plasma chemical vapour deposition, Hybrid pulsed laser deposition, Bonding structure].

C. Popov, W. KulischSilviya Vasileva Boycheva, M. Jelinek: Nanocrystalline diamond/amorphous carbon composite films prepared by MWCVD. In: Proceeding of International conference NANO'03. (Ed. DrSc. Eng. T. Prnka Prof. Eng. J. Svejcar) Praha, Czech Republik: CSNMT Praha, 2003, p. 148 - 153 [Nanocrystalline diamond, thin films, Microwave plasma, chimical vapour deposition].

C. Popov, W. Kulisch, Silviya Vasileva Boycheva: Application Relevant Properties of nanocrystalline Diamond/Amorphous Carbon Composite Films. In: Proceeding of International conference NANO'04. (Ed. Pavel Sandera) Brno, Czech Republik: Brno University of Technology, 2004, p. 97 - 102 [Nanocrystalline diamond, Thin films, Microwave plasma, Mechanical Properties].

K F Cai, C W Nan,M Schmuecker, M Eckhard: Microstructure of hot-pressed B4C-TiB2 thermoelectric composites. In: Journal of Alloys and Compounds. 350, 2003, p. 313 - 318 [composite materials, semiconductor, powder metallurgy, SEM, TEM].

K F Cai, E Mueller, C Drasar, A Mrotzek: Sol-gel processing of ZnO coated TiB2 composite powders. In: Materials Letters. 57, 2003, p. 4251 - 4255 [Zinc oxide, semiconductor, thermoelectric properties, sol-gel].

K. F. Cai, E. Müller, C. Drasar and A. Mrotzek: Preparation and Thermoelectric Properties of Al-doped ZnO Ceramics. In: Materials Science & Engineering B. 104, 2003, p. 45 - 48 [Zinc oxide, semiconductor, thermoelectric properties, sol-gel.].

K. F. Cai, E. Mueller, C. Drasa, C. Stiew, : The Effect of Titanium Diboride Addition on the Thermoelectric Properties of b-FeSi2 Semiconductors. In: Solid State Communication, 131, 325-329.. 131, 2004, p. 325 - 329 [Semiconductor,electronic transport, thermoelectric properties].

K. F. Cai and D. S. McLachlan: Preparation of AlON-TiC composites via reaction-bonding. In: Mater. Res. Bull.. 40, 2005, p. 447 - 451 [ AlON-TiC; composites; reaction-bonding].

K. F. Cai and D. S. McLachlan, G. Sauti, E. Mueller: The effects of annealing on thermal and electrical properties of reaction-bonded AlN ceramic. In: Solid State Sci. . 7, 2005, p. 945 - 949 [electrical properties, reaction-bonding, AlN].

K. F. Cai, X. R. He: Hydrothermal synthesis and characterization of silver and antimony co-doped PbSe nanopowders. In: Mater. Lett. . 60, 2006, p. 2461 - 2464 [hydrothermal synthesis, PbSe, thermoelectric].

K.F. Cai, Q. Lei, L.C. Zhang: Ultra long SiC /SiO2 core-shell nanocables from organic precursor. In: J. Nanosci. Nanotechnol. 5, 2005, p. 1925 - 1928 [SiC/SiO2 nanocable, synthesis, pyrolysis].

K. F. Cai, L. C. Zhang, Q. Lei, E. Mueller, C. Stiewe,: Preparation and characterization of Ba8Ga16Ge30/Sr8Ga16Ge30 Core-shell Single Crystals. In: Cryst. Growth & Des.. 6, 2006, p. 1797 - 1800 [Clathrate, single crystal, thermoelectric, synthesis,characterization].

K. F. Cai, Q. Lei, C. Yan, L. C. Zhang, : Self-assembly of Te Nanomaterials, . In: Solid State Phenomena. 121-123, 2007, p. 287 - 290 [nanomaterials, self-assembly, characterization].

K. F. Cai, L. C. Zhang, Q. Lei, : Preparation and characterization of Sr, Ba Filled Type-I Ge Clathrate Single Crystals. In: Key Eng. Mater. . 336-338, 2007, p. 896 - 899 [Preparation,characterization, Type-I clathrate, Single Crystals ].

K. F. Cai, Q. Lei, A.X Zhang: A simple route to ultra long SiC nanowires. In: J. Nanosci. & Nanotechn.. 7, 2007, p. 804 - 807 [SiC, nanowires, synthesis, pyrolysis].

K. F. Cai, A. X. Zhang, J. L. Yin: Ultra thin and ultra long SiC/SiO2 nanocables from catalytic pyrolysis of Poly(dimethyl siloxane). In: Nanotechnol.. 18, 2007, p. 485601 - 485604 [SiC/SiO2 nanocables,pyrolysis, catalysis,synthesis].

K. F. Cai, X. R. He, L. C. Zhang,: Fabrication, properties and sintering of ZnO nanopowder. In: Mater. Lett. . 62, 2008, p. 1223 - 1226 [fabrication, ZnO, nanopowder].

Mariana Calin, Jürgen Eckert, Ludwig Schultz: High-strength Cu-Ti-rich bulk metallic glasses and nano-composites. In: Z. Metallkd. . 94, 5, 2003, p. 615 - 620 [Bulk metallic glasses; Nanocomposites; Casting; Thermal stability; Mechanical properties].

Mariana Calin, Mihai Stoica, Jürgen Eckert, Alain Reza Yavari, Ludwig Schultz: Phase formation, thermal stability and crystallization behavior of Cu47Ti33Zr11Xi8X1 (X=Fe, Si, Sn, Pb) bulk glassy alloys. In: Z. Metallk.. 95, 11, 2004, p. 1 - 9 [Bulk metallic glasses; Casting; Pase formation; Crystallization; Synchrotron radiation].

W. Xu, KB. Kim, J. Das, M. Calin: Phase stability and its effect on the deformation behavior of Ti-Nb-Ta-In/Cr beta alloys. In: SCRIPTA MATERIALIA . 54, 2006, p. 1943 - 1948 [Beta Ti-based alloys, deformation behavior].

Guang-hui Cao, P. Simon and W. Skrotzki,S. C. Wimbush and B. Holzapfel: TEM Characterisation of YNi2B2C Thin Film Microstructure. In: Applied Physics A. 2004, [Borocarbides, thin films, transmission electron microscopy (TEM)].

G. H. Cao, P. Simon, W. Skrotzki: Transmission electron microscopy study of YNi2B2C thin film growth on MgO (001). In: Journal of Materials Research. 19(5), 2004, p. 1413 - 1416 [Borocarbides, YNi2B2C, thin films, transmission electron microscopy (TEM), microstructure].

G. H. Cao, G. J. Shen, Z. G. Liu and W. Skrotzki: Transmission electron microscopic investigation of the Gamma to Alpha phase transformation in a Ti-45Al-5Nb alloy. In: Scripta Materialia. 51(5), 2004, p. 417 - 421 [Titanium aluminides, Phase transformation, Transmission electron microscopy (TEM)].

G.H. Cao, B. Klöden, C.-G. Oertel, W. Skrotzki, U. Garbe, E. Rybacki, H.-G. Brokmeier : Shear texture formation during high-strain torsion of titanium aluminides. In: Solid State Phenomena. 105, 2005, p. 303 - 308 [TiAl, torsion, synchrotron radiation, TEM, microstructure, texture].

Jiang-Li Cao, Axel Solbach and Uwe Klemradt: X-ray reflectivity studies of ferroelectric and dielectric multilayer structures. In: Physica B: Physics of Condensed Matter. 357, 2005, p. 122 - 125 [Ferroelectrics; Electrode; X-ray reflectivity; Multilayer].

J.L. Cao, A. Solbach, U. Klemradt, T. Weirich, J. Mayer, U. Böttger, U. Ellerkmann, P.J. Schorn, P. Gerber, and R. Waser : Effects of thermal annealing on the structure of ferroelectric thin films. In: Journal of the American Ceramics Society. 89, 2006, p. 1321 - 1325 [ferroelectric, lead zirconate titanate, X-ray reflectivity, synchrotron radiation, thin films].

Jiang-Li Cao, Axel Solbach, Uwe Klemradt, Thomas Weirich, Joachim Mayer, Herbert Horn-Solle, Ulrich Böttger, Peter J. Schorn, T. Schneller, and Rainer Waser: Structural investigations of Pt/Ti oxide electrode stack for ferroelectric thin film devices. In: Journal of Applied Physics. 99, 2006, p. 114107 [ferroelectric thin films, electrode, X-ray reflectivity, multilayer, interfaces ].

J.-L. Cao, A. Solbach, U. Klemradt, T. Weirich, J. Mayer, U. Böttger, P.J. Schorn, and R. Waser: Density inhomogeneity in ferroelectric thin films. In: Appl. Phys. Lett. . 89, 2006, p. 052901 - 052901 [ferroelectric thin films, ferroelectricity, interfaces, size effects, synchrotron radiation].

J.L. Cao, A. Solbach, U. Klemradt, T. Weirich, J. Mayer, P.J. Schorn, and U. Böttger: Probing fatigue in ferroelectric thin films with subnanometer depth resolution. In: Appl. Phys. Lett.. 91, 2007, p. 072905 [ferroelectric thin films, x-ray reflectivity, fatigue, synchrotron radiation].

Li Chang; Klaus Friedrich; Lin Ye; Patricio Toro: Evaluation and visualization of the percolating networks in multi-wall carbon nanotube/epoxy composites. In: Journal of Materials Science. 44, 2009, p. 4003 - 4012 [multi-wall carbon nanotubes, electrical properties, microscopy techniques, charging contrast imaging, epoxy nanocomposites].

M. Uhlemann, S. Ningshen, U. Wolff, Uday Kumar Chatterjee, F. Schneider: Hydrogen Embrittlement and Localised Corrosion Resistance of Nitrogen Containing Austenitic Alloys. In: ISOMALM 2000. (Ed. IGCAR Kalpakkam) New Delhi: Alied Publishers, 2000, p. 1031 - 1038.

Lucio Colombi Ciacchi, Mike C. Payne: First-principles molecular-dynamics study of native oxide growth on Si(001). In: Physical Review Letters. 95, 2005, p. 196101-1 - 196101-4 [Ab initio calculations, Molecular dynamics, Oxidation, Surface chemistry].

Nicola Seriani, Wolfgang Pompe, Lucio Colombi Ciacchi: Catalytic oxidation activity of Pt3O4 surfaces and thin films. In: Journal of Physical Chemistry. 110, 2006, p. 14860 - 14869.

Lucy Heady, Marivi Fernandez-Serra, Ricardo L. Mancera, Sian Joyce, Ashok R. Venkitaraman, Emilio Artacho, Chris-Kriton Skylaris, Lucio Colombi Ciacchi, Mike C. Payne: Novel structural features of CDK inhibition revealed by an ab initio computational method combined with dynamic simulations. In: Journal of Medicinal Chemistry. 49, 2006, p. 5141 - 5153 [Cyclin-dependent kinases, CDK2, density-functional theory, molecular dynamics, structure-based design].

Magali' Lingenfelder, Giulia Tomba, Giovanni Costantini, Lucio Colombi Ciacchi, Alessandro De Vita, Klaus Kern: Tracking the Chiral Recognition of Adsorbed Dipeptides at the Single-Molecule Level. In: Angewandte Chemie International Edition. 46, 2007, p. 4492 - 4495.

Lucio Colombi Ciacchi: Modelling the onset of oxide formation on metal surfaces from first principles. In: International Journal of Materials Research. 98, 2007, p. 708 - 716 [Low temperature oxidation Density functional theory Molecular dynamics Bare metal surfaces].

Nicola Seriani, Zheng Jin, Wolfgang Pompe, Lucio Colombi Ciacchi: Density functional theory study of platinum oxides: From infinite crystals to nanoscopic particles. In: Physical Review B. 76, 2007, p. 155421-1 - 155421-9.

Carles Corbella, Ingmar Bialuch, Marc Kleinschmidt, Klaus Bewilogua: Up scaling of processes for plasma-activated chemical vapour deposition of modified DLC coatings. In: 50th SVC Annual Technical Conference Proceedings. Albuquerque, NM, USA: Society of Vacuum Coaters, 2007, p. 616 - 619 [Up Scaling; PACVD; Modified DLC; Hard Coatings].

Carles Corbella, Ingmar Bialuch, Marc Kleinschmidt, Klaus Bewilogua: Modified DLC coatings prepared in a large-scale reactor by dual microwave/pulsed-DC plasma-activated chemical vapour deposition. In: Thin Solid Films. 517, 2008, p. 1125 - 1130 [Modified DLC; Up scaling; Microwaves; ECR; Pulsed-DC; PACVD].

Melik C. Demirel, CD. Cherny: Clustering and Diversity of Fluctuations for Protein. In: Journal of Nanomedicine. 1, 2005, p. 57 - 64.

Murat Cetinkaya, Ahmet Zeytun, Jorge Sofo, Melik C. Demirel: How do insertions affect Green Fluorescent Protein. In: CHEMICAL PHYSICS LETTERS. 419, 2006, p. 48 - 54.

H. Winkler, A. Devi et al.: Epitaxy, composites and colloids of gallium nitride achieved by transformation of single source precursor. In: phys. stat. sol. (a). 177, 2000, p. 27 - 35.

R.A. Fischer, A. Devi: Precursor chemistry for OMVPE of group-13 nitrides. In: Developments in Crystal Growth Research. 2, 2000, p. 61 - 82.

R.A. Fischer, A. Wohlfart, A. Devi, W. Rogge: Growth kinetics of GaN thin films grown by MOVPE using single source precursors. In: MRS Internet J. Nitride Semocond. Research, Suppl. 1. 5, 2000.

H. Sussek, O. Stark, A. Devi et al.: Precursor chemistry of group-III nitrides XVI: Synthesis and structure of monomeric penta coordinated intramoleculary adduct stabilized amidobisazides of aluminium, gallium and indium with and all nitrogen coordination sphere: OMCVD of GaN using (N3)2Ga{N. In: J. Organomet. Chem.. 602, 2000, p. 29 - 36.

Suhash Ranjan Dey, Emmanuel Bouzy, Alain Hazotte: Features of feathery γ structure in a near-γ TiAl alloy. In: Acta Materialia. 56, 2008, p. 2051 - 2062 [Titanium aluminides; γ-Feathery-like structures; Crystallographic orientation relationship; CSL boundaries; Sympathetic nucleation].

Rifa El-Khozondar, Hala El-Khozondar: Numerical Modeling of Microstructural Evolution in Three-Phase Polycrystalline Materials . In: The Arabian Journal for Science and Engineering. 34, 2009, p. 241 - 252 [Grain growth, microstructural evolution, Potts model, Numerical simulation].

Hala J. El-Khozondar, Rifa J. El-Khozondar, M.M. Shabat, A.W. Koch: Stress Effect on Optical Nonlinear Waveguide Sensor. In: Journal of Optical Communictions. 28, 2007, p. 175 - 179 [Stess, Optical, nonlinear, waveguide, sensor ].

Rifa El-Khozondar, Slava Solomatov, Veena Tikare: Grain size in the lower mantle: constraints from numerical modeling of grain growth in two-phase systems. In: Physics of the Earth and Planetary Interiors. 129, 2002, p. 265 - 282 [grain growth, lower mantle, microstructure, stress, numerical model].

A. Elrefaey and W. Tillmann: Interface Structure and Mechanical Properties of the Titanium/Steel Joint Vacuum Brazed with Ag-Cu34-Ti2 foil. In: Metallurgical and Materials Transactions A. 38A, 2007, p. 2956 - 2962 [Brazing, Titanium, Steel, microstructure].

Ahmed Abdel-Monem Elrefaey and Wolfgang Tillmann: Microstructure and Mechanical Properties of brazed Titanium/Steel Joints. In: Journal of Material Science. 42, 2007, p. 9553 - 9558 [Brazing, Titanium, Steel, Microstructure].

N. Eswara Prasad, D. Vogt et al.: High temperature, low cycle fatigue behaviour of an aluminium alloy (Al-12Si-CuMgNi). In: Mat. Sci. and Ingineering. A276, 2000, p. 283 - 287.

N. Eswara Prasad, D. Vogt et al.: Effect of prior fatigue exposure on the creep behaviour of an aluminium alloy (Al-12Si-CuMgNi). In: Zeitschr. Metallkunde. 91, 2000, p. 190 - 195.

N. Eswara Prasad, P. Rama Rao: Low cycle fatigue resistance of Al-Li alloys. In: Mat. Sci. and Technology. 16, 2000, p. 408 - 426.

G. Fan, J. Eckert et al.: Effect of Co and Cu alloying on Nd-Fe-Al based bulk amorphous alloys. In: Mat. Sci. Forum. 343-346, 2000, p. 97 - 102.

G.J. Fan, W. Löser et al.: Glass-forming ability of RE-Al-TM alloys (RE=Sm, Y; TM=Fe, Co, Cu). In: Acta Mater.. 48, 2000, p. 3823 - 3831.

Shao-Yun Fu, B. Lauke, Y.H. Zhang, Y.-W. Mai: On the post-mortem fracture surface morphology of short fiber reinforced thermoplastics. In: Composites: Part A. 36, 2005, p. 987 - 994 [A. Glass fibres; B. InterfaceUinterphase; Thermoplastics].

Daniel de la Fuente, Mallika Bohm, Christophe Houyoux and Michael Rohwerder: Methods for salt contamination of steel corrosion products: A charaterization study. In: Materials and Corrosion/Werkstoffe und Korrosion. 58, 2007, p. 781 - 788 [steel, corrosion, interface chemistry, organic coatings].

Arthur Galiyev, Rustam Kaibyshev, Günter Gottstein. : Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60. In: Acta mater.. 49, 2001, p. 1199 - 1207 [dislocations, deformation mechanisms, microstructure, recrystallization &recovery].

Arthur Galiyev, Rustam Kaibyshev.: Microstructural evolution in ZK60 magnesium alloy during severe plastic deformation. In: Materials Trans.. 42, 2001, p. 1190 - 1199 [magnesium alloy, microstructural evolution, intense plastic straining, low temperature dynamic recrystallization, nanometer-scale grains].

Arthur Galiyev, Rustam Kaibyshev, Günter Gottstein.: Mechanisms of dynamic recrystallization in a Mg-Zn-Zr alloy. In: Recrystallization and Grain Growth. (Ed. Günter Gottstein, Dmitri Molodov) Berlin Heidelberg: Springer-Verlag, 2001, p. 893 - 898 [microstructure, grain boundaries, misorientation angle, dynamic recrystallization, magnesium alloy].

Hnatko M., Galusek D., ¿ajgalík P: Low-cost Preparation of Si3N4-SiC Micro/Nano Composites by in-situ Carbothermal Reduction of Silica in Silicon Nitride Matrix,. In: J.Eur.Ceram.Soc.. 24, 2004, p. 189 - 195.

Svancárek P., Galusek D., Calvert C., Loughran F., Brown A., Brydson R., Riley F.L.: A Comparison of the Microstructure and Mechanical Properties of Two Liquid Phase Sintered Aluminas Containing Different Molar Ratios of Calcia-Silica Sintering Additives. In: J. Eur. Ceram. Soc. 24, 2004, p. 3453 - 3463.

Sedlácek J., Galusek D., Svancárek P., Brown A., Brydson R.: Alumina-carbon composites with high hardness. In: Key Eng. Mater. 264-68, 2004, p. 841 - 844.

Svancarek P., Galusek D, Loughran F., Calvert C., Brown A., Brydson R., Riley F.L.,: Investigation of grain boundaries in LPS aluminas by TEM. In: Inst. Phys. Conf. Ser.. 179, 2004, p. 273 - 276.

Sedlácek J., Galusek D., and Sajgalík P: Effect of rare earth oxide and rare earth-alumina-silica glass on mechanical properties of liquid phase sintered alumina ceramic. In: Key Eng. Mater. 290, 2005, p. 121 - 128.

Galusek D., Riedel R., and Balog M.: Polymer-derived Al2O3-SiC nanocomposites: preparation route vs. microstructure. In: Key Eng. Mater. 290, 2005, p. 246 - 249.

Galusek D., Riley F.L., and Liska M.: Determination of fracture toughness and fracture probability of LPS aluminas by Hertzian indentation. In: Key Eng. Mater . 290, 2005, p. 308 - 311.

P. Svancárek, D. Galusek, F. Loughran, A. Brown, R. Brydson, A. Atkinson, F. Riley: Microstructure-stress relationships in liquid phase sintered alumina modified by the addition of 5 weight % of calcia-silica additives. In: Acta Materialia. 54, 2006, p. 4853 - 4863.

D. Galusek, J. Sedlácek, P. Svancárek, R. Riedel, R. Satet, M. Hoffmann: The influence of post-sintering HIP on the microstructure, hardness, and indentation fracture toughness of polymer-derived Al2O3¿SiC nanocomposites. In: Journal of the European Ceramic Society. 27, 2007, p. 1237 - 1245.

P. Lichvár, P. Sajgalík, M. Liska, D. Galusek:: CaO¿SiO2¿Al2O3¿Y2O3 glasses as model grain boundary phases for Si3N4 ceramics. In: Journal of the European Ceramic Society. 27, 2007, p. 429 - 436.

M. Balog, P. Sajgalík, M. Hnatko, J. Keckés, T. Schobel, F. Hofer, D. Galusek, Z. Lencés: Nano- and macro-hardness and fracture toughness of Si3N4/SiC micro/nano ¿composites. In: Journal of the European Ceramic Society,. 27, 2007, p. 2145 - 2152.

K. Bodisová, D. Galusek, P. Svancárek, P. Sajgalík: Two-stage sintering of alumina with submicrometer grain size. In: J. Am. Ceram. Soc. 90, 2007, p. 330 - 332.

D. Galusek, J. Sedlácek, R. Riedel: Al2O3-SiC composites by warm pressing and sintering of an organosilicon polymer-coated alumina powder. In: J.Eur.Ceram.Soc. 27, 2007, p. 2385 - 2392.

Jianrong Gao, T. Volkmann, S. Roth, W. Löser, D.M. Herlach: Phase formation in undercooled NdFeB alloy droplets. In: Journal of Magnetism and Magnetic Materials. 234, 2001, p. 313 - 319 [NdFeB; Drop tube; Rapid solidification; Metastable phase; Magnetic properties].

Jianrong Gao, Th. Volkmann, D.M. Herlach: Metastable solidification of NdFeB alloys by drop-tube processing. In: J. Mater. Res.. 16 No. 9, 2001, p. 2562 - 2567.

Jianrong Gao, T. Volkmann, B. Wei, D. M. Herlach: Metastable Phase Formation In Undercooled Nd-Fe-B Melts. In: Science of Metastable and Nanocrystalline Alloys Structure, Properties and Modelling . (Ed. A. R. Dinesen, M. Eldrup, D. Juul Jensen, S. Linderoth, T. B. Pedersen, N. H. Pryds, A. Schroder Pedersen, J. A. Wert) Roskilde: Riso National Laboratory, 2001, p. 417 - 422.

Thomas Volkmann, Jianrong Gao, Dieter M. Herlach: Direct crystallization of the preitectic Nd2Fe14B1 phase by undercooling of bulk alloy melts. In: Applied Physics Letters. 80 No. 11, 2002, p. 1915 - 1917.

Jianrong Gao, T. Volkmann, D. M. Herlach: Undercooling-dependent solidification behavior of levitated Nd14Fe79B7 alloy droplets. In: Acta Materialia . 50, 2002, p. 3003 - 3012 [Rare earth alloys, Rapid solidification; Microstructure; Nucleation and growth].

Jianrong Gao, Thomas Volkmann, Dieter M. Herlach: Critical Undercoolings for Different Primary Phase Formation in Nd15Fe77.5B7.5 Alloy. In: IEEE Transactions on Magnetics. 38 No. 5, 2002, p. 2910 - 2912.

Jianrong Gao, T. Volkmann, D. M. Herlach: Solidification of levitated Nd-Fe-B alloy droplets at significant bulk undercoolings. In: Journal of Alloys and Compounds. 350, 2003, p. 344 - 350 [Transition metal alloys; Rare earth alloys; Permanent magnets; Rapid solidification].

Jianrong Gao, T. Volkmann, D. M. Herlach: A metastable phase crystallized from undercooled NdFeCoZrGaB alloy droplets. In: Journal of Alloys and Compounds . 308, 2000, p. 296 - 300.

Jianrong Gao, Thomas Volkmann, Jörn Strohmenger, Dieter M. Herlach: Phase selection in undercooled Nd-Fe-Co-B alloy droplets. In: Materials Science and Engineering A. 375-377, 2004, p. 498 - 501 [NdFeB, cobalt addition, undercooling, solidification, phase selection].

Dieter M. Herlach, Jianrong Gao, Dirk Holland-Moritz, Thomas Volkmann: Nucleation and phase-selection in undercooled melts. In: Materials Science and Engineering A. 375-377, 2004, p. 9 - 15 [Undercooling, containerless processing, rapid solidification, metastable phases, hard magnetic alloys].

Thomas Volkmann, Jianrong Gao, Jörn Strohmenger, Dieter M. Herlach: Direct crystallization of the peritectic Nd2Fe14B1 phase by undercooling of the melt. In: Materials Science and Engineering A. 375-377, 2004, p. 1153 - 1156 [Rare-earth magnetic alloys, undercooling of melts, containerless processing, metastable phases].

Jörn Strohmenger, Thomas Volkmann, Jianrong Gao, Dieter M. Herlach: Phase selection in undercooled Fe-Nd alloy melts. In: Materials Science and Engineering A. 375-377, 2004, p. 561 - 564 [Rare-earth magnetic alloys, undercooling of melts, containerless processing, metastable phases].

Thomas Volkmann, Joern Strohmenger, Jianrong Gao, Dieter M. Herlach: Observation of a metastable phase during solidification of undercooled Nd-Fe-B alloy melts by in situ diffraction experiments using synchrontron radiation. In: Applied Physics Letters. 85, 2004, p. 2232 - 2234 [Magnetic materials, solidification, undercooling, synchrotron radiation, in situ diffraction].

Jianrong Gao, T. Volkmann, S. Reutzel, D. M. Herlach: Characterization of the microstructure of gas-atomized Nd-Fe-B alloy particles of non-peritectic chemical compositions. In: Journal of Alloys and Compounds. 388, 2005, p. 235 - 240 [Metals, liquid quenching, scanning electron microscopy, X-ray diffraction analysis].

Matthias Kolbe, Jianrong Gao: Liquid phase separation of Co-Cu alloys in the metastable miscibility gap. In: Materials Science and Engineering A. 413-414, 2005, p. 509 - 513 [Metastable miscibility gap; Liquid Metals; Rapid Solidification; Undercooling].

Joern Stohmenger, Thomas Volkmann,Jianrong Gao, Dieter M. Herlach: The formation of a metastable peritectic phase in Nd-Fe-B alloys investigated by in situ X-ray diffraction during solidification. In: Materials Science and Engineering A. 413-414, 2005, p. 263 - 266 [Undercooling; Metastable phases; Containerless processing; Synchrotron radiation].

Matthias Kolbe, Jianrong Gao, Sven Reutzel: Solidification of Co-Cu alloys in the metastable miscibility gap under low gravity conditions. In: Materials Science and Forum. 508, 2006, p. 455 - 460 [Metastable miscibility gap; Liquid Metals; Rapid Solidification; Undercooling].

Joern Strohmenger, Thomas Volkmann; Jianrong Gao; Dieter M. Herlach: Metastable phase formation in undercooled Nd-Fe-B alloys investigated by in-situ diffraction using synchrotron radiation. In: Materials Science Forum. 508, 2006, p. 81 - 86 [Undercooling; Solidification; Metastable Phases; Electromagnetic levitation; Synchrotron Radiation; Md-Fe-B].

Sven Rentzel, Joern Strohmenger, Thomas Volkmann, Jianrong Gao, Dieter M. Herlach: Phase formation in undercooled Sm-Co alloy melts. In: Materials Science and Engineering A. 449-451, 2007, p. 709 - 712 [Transition metal alloys; Rare earth alloys; Intermetallic compounds; Rapid solidification; Metastable phase formation].

Valeriy Y. Gertsman: Geometrical Theory of Elements of Polycrystals Consisting of CSL Boundaries. In: Recrystallization and Grain Growth . (Ed. G. Gottstein, D. A. Molodov) Berlin: Springer-Verlag, 2001, p. 415 - 420 [grain boundaries, triple junctions, quadruple points, polycrystal].

Gang Gu, M. Burghard, G. Philipp, G. S. Duesberg, P. W. Chiu, G. T Kim, A. Minett, W. Han, S. Roth: Fabrication Multiwalled Carbon Nanotubes on Patterned Electrodes. In: AIP. 544, 2001, p. 235 - 238.

Gang Gu, G. Philipp, Xiaochun Wu, Alexander Bittner, Marko Burghard, Siegmar Roth: Growth of Single Walled Carbon Nanotubes from Patterned Catalysts on Flat Substrate by Microcontact Printing. In: Advanced Functional Materials. 1, 2001, p. 295.

Gang Gu, Marko Burghard, G.-T. Kim, G. S. Duesberg, P. W. Chiu, Siegmar Roth, W. Han: Growth and Electrical Transport of Ge Nanowires. In: J. Appl. Phys.. 90, 2001, p. 5744.

Gang Gu, P. O. Ong, Chu Chen, S. Roth: Synthesis and characterization of Y203: Eu3+ thin films on silicon substrate by pulsed laser ablation. In: J. Phys. D. 33, 2000, p. 1263.

Gang Gu, M. Schmid, P. W. Chiu, A. Minett, J. Fraysse, G. T. Kim, S. Roth, M. Kozlov, E. Munoz and R. H. Baughman: V2O5 Nanofiber Sheet Actuators. In: Nature Materials. 2, 2003, p. 316 - 319 [nanofiber, actuator].

I. Gurrappa, S. Weinbruch et al.: Factors governing breakaway oxidation of FeCrAl-based alloys. In: Mat. and Corrosion. 51, 2000, p. 224 - 235.

M. Kiran, I. Gurrappa: Evaluation of corrosion resistance of different plasma sprayed alumina, magnesia stabilized zirconia and yttria stabilized zirconia coatings on 316 stainless steel for biomedical applications. In: Proc. "Global Corrosion Meet", Mumbai/Indien. 2000.

Corrosion and selection of materials to sustain in rural environments. In: Proc. "Environmental Awareness, Education & Management for Sustainable Rural Development", Tirupati/Indien. 2000.

Coating development for superalloys to protect from hot corrosion: A smart approach. In: Proc. 10th National Congr. on Corrosion Control, Madhurai/Indien. 2000.

Effect of major and minor alloying elements on hot corrosion of superalloys and coating. In: Proc. "Global Corrosion Meet", Mumbai/Indien. 2000.

I. Gurrappa, D.K. Das, A.K. Gogia: Protective coatings for titanium alloys to limit oxygen ingress. In: Proc. 5th Int. Symp. on High Temperature Corrosion, Les Embiez/Frankreich. 2000.

Injeti Gurrappa: Effect of Industrial Pollution on the Degradation of Materials in Different Environments. In: International Conference on Industrial Pollution and Control Technologies. (Ed. ICIPACT) Hyderabad: ICIPACT, 2001, p. 112 - 127.

Injeti Gurrappa: Effect of Aluminizing on the Oxidation behaviour of Titanium Alloy. In: Oxidation of Metals. 56 , 2001, p. 73 - 87.

Injeti Gurrappa: The Influence of Nb and Ga addition on the Corrosion Resistance of Nd-Fe-B Permanent Magnets in Marine Environments- Part II. In: Corr. Prev. Control. 48, 2001, p. 67.

Injeti Gurrappa: Effect of Environmental Variables on Corrosion of Cooling Water Systems. In: All India Convention on Cooling Water Treatment. Hyderabad: Invited talk, 2001, p. B1 - B16.

Injeti Gurrappa: Protection of Seawater Cooling Systems against Corrosion and Fouling. In: All India Convention on Cooling Water Treatment. Hyderabad: Invited talk, 2001, p. 11 - 18.

Injeti Gurrappa: Smart Approaches in Designing Effective Cathodic Protection Systems. In: All India Convention on Cathodic Protection Engineering. Mumbai: Invited Talk, 2001, p. 1 - 40.

Injeti Gurrappa: Cathodic Protection of Cooling Water Systems and Selection of Appropriate Materials. In: All India Convention on Cooling Water Treatment. Hyderabad: Invited talk, 2001, p. C1 - C27.

Injeti Gurrappa: Corrosion and its Importance in Selection of Materials for Biomedical Applications. In: Corrosion Prevention & Control. 48 (1), 2001, p. 23 - 37.

Injeti Gurrappa: The influence of Nb and Ga addition on the Corrosion Resistance of Nd-Fe-B Permanent Magnets in Marine Environments- Part I. In: Corr. Prev. Control. 48, 2001, p. 116 - 121.

Injeti Gurrappa: Development of Oxidation Resistant Coatings for Titanium Alloy, IMI 834. In: J. Material Science & Technology. 17 (5), 2001, p. 581 - 587.

Injeti Gurrappa: Identification of Hot Corrosion Resistant MCrAIY based Bond Coatings for Gas Turbine Engine Applications. In: J. Surface Coatings & Technology. 139, 2001, p. 272 - 283.

Injeti Gurrappa: High performance coatings for titanium alloys to protect against oxidation. In: J. Surface Coatings & Technology. 139, 2001, p. 216 - 221.

Injeti Gurrappa: Platinum Aluminide Coatings for Oxidation Resistance of Titanium Alloys. In: Platinum Metals Review. 45 (3), 2001, p. 124 - 129.

Injeti Gurrappa: The Corrosion Behaviour of SmCo5 permanent Magnets in Different Environments. In: J. Materials Chemistry and Physics. 35, 2002, p. 1.

Injeti Gurrappa: Corrosion Studies Related to Suitability of Permanent Magnets for Biomedical Applications. In: J. Materials Characterisation. 48, 2002, p. 63.

Injeti Gurrappa: Development of Appropriate Thick Ceramic Coatings on 316 Stainless Steel for Biomedical Applications. In: Surface Coatings and Technology. 161, 2002, p. 70.

Injeti Gurrappa: On the Mechanism of Degrations of Titanium alloy IMI 834 in Oxidizing atmospheres at Elevated Temperatures. In: Corrosion Prevention & Control. 49 (2), 2002, p. 79.

Injeti Gurrappa: Suitability of Nd-Fe-B Permanent Magnets for Biomedical Applications- A Corrosion Study. In: J. Alloys and compounds. 339 (1/2), 2002, p. 241.

Injeti Gurrappa: Characterization of Different Materials for Corrosion Resistance under Simulated Body Fluid Conditions. In: J. Materials Characterization. 49, 2002, p. 73.

Injeti Gurrappa : Understanding the Mechanism of Degration of Nd-Fe-B Permanent Magnets in Different Environments. In: J. Electrochemical Society. 51, 2002, p. 43.

Injeti Gurrappa, D.Manova, J.W.Gerlach, S.Mandl and B.Rauschenbach: Influence of nitrogen implantation on high temperature oxidation characteristics of titanium base alloys. In: Surface Coatings and Technology. 201, 2006, p. 3536 - 3546 [Materials sicnece, Metallurgy, Surface engineering].

Injeti Gurrappa, D.Manova, J.W.Gerlach, S.Mandl and B.Rauschenbach: Effect of plasma immersion ion implantation and deposition on high temperature oxidation of titanium alloy IMI 834-aluminizing. In: Journal of Alloys and Compounds. 426, 2006, p. 375 - 383 [Materials Science, Metallurgy, Surface Engineering].

Injeti Gurrappa and C.V.Krishna Reddy: Characterisation of newly developed structural DMR-1700 steel and comparison with different steels for chemical applications. In: Material Processing and Technology. 182, 2007, p. 195 - 201 [Metallurgy, corrosion, surface engineering,protective coatings].

Injeti Gurrappa, G.Malakondaiah: Charcterization of newly developed structural DMR-1700 steel and comparison with different steels for industrial applications. In: Metallurgical and Materials Transactions A. 37, 2006, p. 3039 - 3046 [steels, corrosion, Protective coatings, Industrial applications, ].

Injeti Gurrappa and A.Sambasiva Rao: Thermal barrier coatings for enhanced efficiency of gas turnbine engines. In: Surface Coatings and Technology. 201, 2006, p. 3016 - 3029 [super alloys, hot corrosion, protective coatings, overlay coatings, gas turbine engines, aerospace applications].

Injeti Gurrappa and V.V.Bhanu Prasad: Corrosion characteristics of aluminium based metal matrix composites. In: Materials Science and Technology. 22, 2006, p. 115 - 122 [metal matrix composites, corrosion, aerospace applications, protetcive coatings, degradation mechanisms].

Manel Haj-Taieb, A.S.M.A. Haseeb, Justin Caulfield; Klaus Bade, Jarir Aktaa: Thermal Stability of Electrodeposited LIGA Ni-W Alloys for High Temperature MEMS Applications. In: Microsystem Technologies. 14, 2008, p. 1531 - 1536 [Thermal Stability, LIGA, Ni-W Alloys, High Temperature MEMS ].

A.S.M.A. Haseeb, K. Bade: LIGA Fabrication of Nanocrystalline Ni-W Alloy Micro Specimens from Ammonia-Citrate Bath . In: Microsystem Technologies. 14, 2008, p. 379 - 388 [LIGA Fabrication, Nanocrystalline Ni-W Alloy, Micro Tensile Specimens, Ammonia-Citrate Bath].

A.S.M.A. Haseeb, K. Bade, U. Albers: Friction and Wear Characteristics of Electrodeposited Nanocrystalline Nickel-Tungsten Alloy Films . In: Wear. 264, 2008, p. 106 - 112 [Friction and Wear, Electrodeposition, Nanocrystalline Nickel-Tungsten Alloy ].

G. He, W. Löser, J. Eckert and L. Schultz: Enhanced Plasticity in a Ti-base Bulk Metallic Glass-Forming Alloy by in situ Formation of a Composite Microstructure. In: Journal of Materials Research. 17, 2002, p. 3015 - 3018 [bulk amorphous, mechanical property, ductility, composite].

G. He, J. Eckert, W. Löser and L. Schultz: Novel Ti-base nanostructure-dendrite- composite with enhanced plasticity. In: Nature Materials. 2, 2003, p. 33 - 37 [Nanostructure, Ti alloys].

G. He, W. Löser, J. Eckert and L. Schultz: In situ formed dendrite-nanostructure composite with high elasticity and large plasticity in Ti-Cu-Ni-Sn-Ta multicomponent alloy system. In: Acta Materialia. 51, 2003, p. 5223 - 5234.

G. He, Z. F. Zhang, W. Löser, J. Eckert and L. Schultz: Effect of Ta on glass formation, thermal stability and mechanical properties of a Zr52.25Cu28.5Ni4.75Al9.5Ta5 bulk metallic glass. In: Acta Materialia. 51, 2003, p. 2383 - 2395.

G. He, J. Eckert and W. Löser: Stability, phase transformation and deformation behavior of Ti-base metallic glass and composites. In: Acta Materialia. 51, 2003, p. 1621 - 1631.

G. He, W. Löser, J. Eckert and L. Schultz: Phase transformation and mechanical properties of Zr-base bulk glass forming alloys. In: Materials Science and Engineering. A352, 2003, p. 179 - 185.

G. He, W. Löser and J. Eckert: Devitrification and phase transformation of (Ti0.5Cu0.25Ni0.15Sn0.05Zr0.05)100-xMox metallic glasses. In: Scripta Materialia. 50, 2004, p. 7 - 11.

Z. F. Zhang, G. He, J. Eckert and L. Schultz: Fracture mechanisms in bulk metallic glassy materials. In: Physical Review Letters. 91, 2003, p. 045505-1 - 045505-4.

Ioulia Ivanisenko, R. Z. Valiev, W. Lojkowski, A. Grob, H.-J. Fecht: Nanostructure formation and carbides dissolution in rail steel deformed by high pressure torsion. In: Ultrafine Grained Materials II. (Ed. Y. T. Zhu, T. G. Langdon, R. S. Mishra, S. L. Semiatin, M. J. Saran, T. C. Lowe) TMS (The Minerals, Metals & Materials Society), 2002, p. 47 - 54.

Ioulia Ivanissenko, Nikolay Krasilnikov, F lorian Banhart, Dmytro Kolesnikov, Ruslan Valiev, Witold Lojkowski, Hans-Jorg Fecht : Nanocrystalline Fe-1wt. %C Compacts Obtained By High Pressure Torsion Of Mechanically Alloyed Powder. In: Ann. Chim. Sci. Mat.. 27 (3), 2002, p. 45 - 53.

Ioulia Ivanissenko,Witold Lojkowski, Ruslan Z. Valiev, and Hans-Jorg Fecht: The Mechanism of Formation of Nanostructure and Dissolution of Cementite in a Pearlitic Steel during High Pressure Torsion. In: Acta Materialia. 51, 2003, p. 5555 - 5570 [Steels, Carbide Dissolution, Nanocrystalline Alloy, High Pressure Torsion].

Ioulia Ivanissenko,Rainer Wunderlich, Ruslan Z. Valiev and Hans-Jörg Fecht: Annealing Behaviour of Nanostructured Carbon Steel Produced by Severe Plastic Deformation. In: Scripta Materialia. 49, 2003, p. 947 - 952 [High Pressure Torsion, Carbon Steel, carbides dissolution and precipitation, recovery].

Ioulia Ivanissenko,Witold Lojkowky, Ruslan Z. Valiev and Hans-Jörg Fecht: The strain induced cementite dissolution in carbon steel - experimental facts and theoretical approach. In: Solid State Phenomena. 94, 2003, p. 45 - 50.

Ana Kostov, Bernd Friedrich: Selection of Crucible Oxides in Molten Titanium and Titanium Aluminum Alloys by Thermo-Chemistry Calculations. In: Journal of Mining and Metallurgy. 41B, 2005, p. 113 - 125 [thermo-chemistry calculations, crucible oxides, titanium, titanium-aluminum alloys, thermodynamic stability].

Ana Kostov, Bernd Friedrich, Dragana Zivkovic, C. Lochbichler, J. Stoephasius: Predicting Thermodynamic Stability of Crucible Oxides in Molten Titanium Alloys. In: Calphad Conference Book - Calphad XXXIV. (Ed. Harry A.J. Oonk) Maastricht: Utrecht University, The Netherlands, 2005, p. 114 - 114 [predicting thermodynamic stability, molten titanium alloys, crucible oxides].

Ana Kostov, Bernd Friedrich, Dragana Zivkovic: Predicting Thermodynamic Properties in Ti-Al Binary System by FactSage. In: Computational Materials Science. 37, 2006, p. 355 - 360 [Thermodynamics, calculation, predicting, FactSage, Ti-Al binary system].

Ana Kostov, Bernd Friedrich: Predicting thermodynamic stability of crucible oxides in molten titanium and titanium alloys. In: Computational Materials Science. 38, 2006, p. 374 - 385 [Thermodynamic stability, crucible oxides, titanium, titanium alloys].

Ana Kostov, Dragana Zivkovic, Bernd Friedrich: Thermodynamic Study of Ti-V and Al-V Systems Using FactSage. In: Journal of Mining and Metallurgy. 42B, 2006, p. 57 - 65 [thermodynamics, Ti-V, Al-V, calculation of phase diagrams, FactSage].

Ana Kostov, Dragana Zivkovic, Bernd Friedrich: Thermodynamic predicting of Si-Me (Me=Ti, Al) binary systems. In: Journal of Mining and Metallurgy. 43B, 2007, p. 29 - 38 [thermodynamic predicting, binary systems Si-Me (Me=Ti, Al)].

Dragana Zivkovic, Ana Kostov, Iwao Katayama, Dragan Manasijevic, Nada Strbac: Calculation of thermodynamics properties in the Al-Co-Me (Me=Ti,Mo) systems, in the liquid phase. In: Materials at High Temperatures. 24(1), 2007, p. 37 - 42 [thermodynamic calculation, thermodynamics properties, Al-Co-Me (Me=Ti,Mo) systems, liquid phase].

Ana Kostov, Bernd Friedrich: Thermodynamic of Ti-Al-Mn system, in Serbian. In: Copper. 32, 2007, p. 65 - 74 [thermodynamic, ternary system, Ti-Al-Mn].

Ana Kostov, Dragana Zivkovic, Bernd Friedrich: Thermodynamic predicting of Ti-Al-Si system. In: 39th International October Conference on Mining and Metallurgy. (Ed. Rodoljub Stanojlovic, Jovica Sokolovic) Sokobanja: Technical Faculty Bor - University of Belgrade (N-Design Bor), 2007, p. 463 - 469 [thermodynamic predicting, Ti-Al-Si system].

Ana Kostov, Dragana Zivkovic: Thermodynamic calculations in ternary titanium-aluminium-manganese system. In: Journal of the Serbian Chemical Society, (J. Serb. Chem. Soc.). 73(4), 2008, p. 499 - 506 [thermodynamic calculations, ternary system, titanium-aluminium-manganese system, FactSage].

Ana Kostov, Bernd Friedrich, Dragana Zivkovic: Thermodynamic calculations and interaction betwwen ceramics crucible and titanium-aluminium alloys. In: 3rd International Symposium Light Metals and Composite Materials. (Ed. Dr. Nadezda Talijan, Dr. Zeljko Kamberovic) Belgrade: Association of Metallurgical Engineers of Serbia, 2008, p. 67 - 72 [ceramic crucible, titanium-aluminum alloys, thermodynamic calculations].

J.-S. Lee, S. Adams, J. Maier: Transport and phase transition characteristics in AgI:Al2O3 composite electrolytes. Evidence for a highly conducting 7-layer AgI polytype. In: J. Electrochem. Soc.. 147, 2000, p. 2407 - 2418.

Defect chemistry and tranport characteristics of beta-AgI. In: J. Phys. and Chem. Solids. 61, 2000, p. 1607 - 1622.

J.-S. Lee, S. Adams, J. Maier: A mesoscopic heterostructure as the origin of the extreme ionic conductivity in AgI:Al2O3. In: Solid State Ionics. 2000.

Sung Bo Lee, J.-H. Lee, Y.-H. Cho, D.-Y. Kim, W. Sgle, F. Phillipp, P. A. van Aken: Grain-Boundary Plane Orientation Dependence of Electrical Barriers at Σ5 Boundaries in SrTiO3. In: Acta Materialia. 56, 2008, p. 4993 - 4997.

Sung Bo Lee, R.-K. Ko, K.-J. Song, D.-Y. Kim, F. Phillipp, D. N. Lee: Role of elastic anisotropy in evolution of microstructure and texture in orthorhombic YBa2Cu3O7-δ thin film deposits. In: Journal of Applied Physics . 104, 2008, p. 013511.

Sung Bo Lee, J.-H. Lee, P.-S. Cho, D.-Y. Kim, W. Sigle, and F. Phillipp: High-temperature resistance anomaly at a strontium titanate grain boundary and its correlation with the grain boundary faceting-defaceting transition. In: Advanced Materials. 19, 2007, p. 391 - 395.

Sung Bo Lee, J. Moon, C.-H. Chung, Y.-H. Kim, J. H. Lee, and D.-K. Choi: Texture development and grain boundary faceting in an excimer laser-crystallized silicon thin film. In: Journal of Vacuum Science and Technology B. 24, 2006, p. 2322 - 2325.

Sung Bo Lee, D.-K. Choi, F. Phillipp, K.-S. Jeon, and C. K. Kim: In situ high-resolution transmission electron microscopy study of interfacial reactions of deposited Cu thin films on amorphous silicon. In: Applied Physics Letters . 88, 2006, p. 083117.

Sung Bo Lee, D.-K. Choi, and D. N. Lee: Transmission electron microscopy observations of Cu-induced directional crystallization of amorphous silicon. In: Journal of Applied Physics . 98, 2005, p. 114911.

Sung Bo Lee, W. Sigle, F. Phillipp, and D. Brunner: In situ high-resolution transmission electron microscopy of dislocations formation and dynamics during the crystallization of amorphous SrTiO3 . In: Acta Materialia . 53, 2005, p. 1843 - 1848.

Sung Bo Lee, W. Sigle, F. Phillipp and M. Rühle: Faceting Behavior of an Asymmetric SrTiO3 Sigma5 [001] Tilt Grain Boundary Close to Its Defaceting Transition. In: Acta Materialia . 51, 2003, p. 4583 - 4588.

Sung Bo Lee, W. Sigle, W. Kurtz, and M. Rühle: Temperature Dependence of Faceting in SrTiO3 Sigma5 Bicrystal Grain Boundary. In: Acta Materialia 51, 975¿981 (2003). 51, 2003, p. 975 - 981.

Sung Bo Lee, W. Sigle, F. Phillipp and M. Rühle: Faceting Behavior of an Asymmetric SrTiO3 Sigma5 [001] Tilt Grain Boundary Close to Its Defaceting Transition. In: Acta Materialia . 51, 2003, p. 4583 - 4588.

Pavel Lejcek: Metallurgical applications of AES: anisotropy of grain boundary segregation. In: Surf. Interface Anal. . 30, 2000, p. 321 - 326.

Zoltan Lences, K. Hirao, M. J. Hoffmann, S. Kanzaki: Fluorine-Doped Reaction Bonded MgSiN2. In: Key Engineering Materials. 264-268, 2004, p. 865 - 868 [magnesium silicon nitride, reaction bonding, fluorides, thermal conductivity, mechanical properties].

Pavol Sajgalik, Miroslav Hnatko, Peter Copan, Zoltan Lences, Jow-Lay Huang: Influence of Graphite Additives on Wear Properties of Hot Pressed Si3N4 Ceramics. In: J. of Ceramic Society of Japan. 114 (11), 2006, p. 1061 - 1068 [Wear resistance, Si3N4, Microstructure].

M. Balog, J. Keckes, T. Schöberl, D. Galusek, F. Hofer, J. Krest'an, Zoltan Lences, J.-L. Huang, P. Sajgalik: Nano/macro-hardness and fracture resistance of Si3N4/SiC composites with up to 13 wt.% of SiC nono-particles. In: J. of the European Ceramic Society. 27, 2007, p. 2145 - 2152 [Si3N4; SiC; Hardness; Nano-hardness; Toughness and toughening; Nanocomposites].

J. Krest'an, O. Pritula, L. Smrcok, P. Sajgalik, Zoltan Lences, A. Wannberg, F. Moneverde: Corrosion of beta-sialon-based ceramics by molten steel. In: J. of the European Ceramic Society . 27, 2007, p. 2137 - 2143 [Corrosion; Sialon; Steel].

Zoltan Lences, K. Hirao, S. Kanzaki, M. J. Hoffmann, P. Sajgalik: Reaction sintering of fluorine-doped MgSiN2. In: J. of the European Ceramic Society. 24, 2004, p. 3367 - 3375 [Hardness; MgSiN2; Nitrides; Sintering; Strength; Thermal properties].

Pavol Sajgalik, Zoltan Lences: Multifunctional Ceramic Nanocomposites with Self-Diagnostic Ability of Catastrophic Damage. In: Encyclopedia of Nanoscience and Nanotechnology. Taylor & Francis, 2005, p. 1 - 10.

Jinwang Li, Ralf Riedel: Carbothermal Reaction of Silica-Phenol Resin Hybrid Gels to Produce Silicon Nitride/Silicon Carbide Nanocomposite Powders. In: J. Am. Ceram. Soc.. 90, 2007, p. 3786 - 3792.

Jinwang Li, Tomoaki Watanabe, Naonori Sakamoto, Hiroshi Wada, Tohru Setoyama, Masahiro Yoshimura: Synthesis of a Multinay Nitride, Eu-Doped CaAlSiN3, from Alloy at Low Temperatures. In: Chem. Mater. (in press). 20, 2008, p. xxxx - xxxx.

Ruzhong Zuo, Chun Ye, Xusheng Fang, and Jinwang Li: Tantalum Doped 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 Piezoelectric Ceramics. In: J. Euro. Ceram. Soc.. 28, 2008, p. 871 - 877.

Jinwang Li, Tomoaki Watanabe, Hiroshi Wada, Tohru Setoyama, Masahiro Yoshimura: Low-Temperature Crystallization of Eu-Doped Red-Emitting CaAlSiN3 from Alloy-Derived Ammonometallates. In: Chem. Mater.. 19, 2007, p. 3592 - 3594.

Dmytro A. Dzivenko, Andreas Zerr, Vadim K. Bulatov, Gerhard Miehe, Jinwang Li, Brunhilde Thybusch, Joachim Brötz, Hartmut Fueß, Gerhard Brey, Ralf Riedel: High-Pressure Multi-anvil Synthesis and Structure Refinement of Oxygen-Bearing Cubic Zirconium(IV) nitride. In: Adv. Mater.. 19, 2007, p. 1869 - 1873.

Kirill A. Kovnir, Yury V. Kolen'ko, Jinwang Li, Tomoaki Watanabe, Masahiro Yoshimura, and Andrei V. Shevelkov: A Facil High-Yield Solvothermal Route to Tin Phosphide Sn4P3. In: J. Solid State Chem.. 179, 2006, p. 3756 - 3762.

Jinwang Li, Koji Matsumaru, Chanel Ishizaki and Kozo Ishizaki: Diffuse Reflectance Infrared Fourier Transform Spectroscopy of Commercial AlN Powders in Vacuum up to 700°C. In: J. Am. Ceram. Soc.. 69, 2006, p. 2537 - 2541.

Jinwang Li, Masaru Nakamura, Takashi Shirai, Koji Matsumaru, Chanel Ishizaki, and Kozo Ishizaki: Mechanism and Kinetics of Aluminum Nitride Powder Degradation in Moist Air. In: J. Am. Ceram. Soc.. 89, 2006, p. 937 - 943.

Takashi Shirai, Jinwang Li, Koji Matsumaru, Chanel Ishizaki, and Kozo Ishizaki: Surface hydration states of commercial high purity alfa-Al2O3 powders evaluated by temperature programmed desorption mass spectrometry and diffuse reflectance infrared Fourier transform spectroscopy. In: Sci. Tech. Adv. Mater.. 6, 2005, p. 123 - 128.

Jinwang Li, Masaru Nakamura, Takashi Shirai, Koji Matsumaru, Chanel Ishizaki, and Kozo Ishizaki: Hydrolysis of Aluminum Nitride Powders in Moist Air. In: Adv. Tech. Mater. Mater. Proc. J. (ATM). 7, 2005, p. 37 - 42.

Jinwang Li, Dmytro Dzivenko, Andreas Zerr, Claudia Fasel, Yanping Zhou, Ralf Riedel: Synthesis of Nanocrystalline Zr3N4 and Hf3N4 Powders from Metal Dialkylamides. In: Z. Anorg. Allg. Chem.. 631, 2005, p. 1449 - 1455.

R Li, G Liu, M Stoica, J Eckert: FeCo-based multiphase composites with high strength and large plastic deformation. In: Intermetallics. 18, 2010, p. 134 - 139 [Composites; Mechanical properties at ambient temperature; Fracture mode; Microstructure; Rapid solidification processing].

R Li , S Kumar, S Ram, M Stoica, S Roth, J Eckert : Crystallization and magnetic properties of [(Fe,Co)0.75Si0.05B0.20]94Nb6 metallic glasses. In: Journal of Physics D-Applied Physics. 42, 2009, p. 085006.

Ya-Li Li, Edwin Kroke, Alexander Klonczynski and Ralf Riedel.: Synthesis of monodisperse spherical silicon dicarbodiimide particles. In: Advanced Materials. 12, 2000, p. 883 - 887 [ceramic, synthesis, organosilane].

Ya-Li Li,Ralf Riedel, J. Steiger and H. Seggern.: A novel transparent polysilazane glass: synthesis and properties. In: Advanced Engineering Materials. 2, 2000, p. 290 - 293 [synthesis, glass, Organosilane].

Ya-Li Li,Edwin Kroke, Ralf Riedel, Claudia Fasel, Christel Gervais and Florence Babonneau: Thermal cross-linking and pyrolytic conversion of poly- (ureamethylvinyl)- silazanes to silicon-based ceramics. In: Applied Organometallic Chemistry. 15, 2001, p. 820 - 832 [Ceramics, Silicon Carbonitride, Organosilane].

Wen Liang, Christian Rûssel, Delbert Day: Comparative bioactivity of a borate, phosphate and silicate glass. In: Journal of Materials Research. 21(1), 2006, p. 125 - 131 [biomaterials].

Wen Liang, Meng Wang, Christian Russel, Delbert Day: Sodium Silicate Bonded Borate Glass Scaffolds for Tissue Engineering. In: Journal of Materials Science. 42, 2007, p. 10138 [biomaterials].

Feng Liu, Gencang Yang, Reiner Kirchheim: Overall effects of initial melt undercooling, solute segregation and grain boundary energy on the grain size of as-solidified Ni-based alloys. In: Journal of Crystal Growth. 264, 2004, p. 391 - 399 [Initial melt undercooling (DeltaTau); Solute segregation; Grain boundary energy; Grain growth].

Feng Liu, Reiner Kirchheim: Nano-scale grain growth inhibited by reducing grain boundary energy through solute segregation. In: Journal of Crystal Growth. 264, 2004, p. 385 - 391 [A1. Segregation; A1. Solid solutions; B1. Nano-materials].

Feng Liu, R. Kirchheim, Gencang Yang: Effects of the initial melt undercooling on solid-state recrystalization and grain growth processes in as-solidified superalloy. In: Journal of Materials Science. 39, 2004, p. 1871 - 1873.

Feng Liu, Reiner Kirchheim: Grain boundary saturation and grain growth. In: Scripta Materialia. 51, 2004, p. 521 - 525 [Grain boundary energy; Grain boundary segregation; Grain growth].

Frantisek Lofaj, Frantiska Dorcakova, Jozef Kovalcik, Michael J. Hoffmann, Antonio Ramirez De Arellano Lopez: The Effect Of Lanthanides And Nitrogen On Microhardness Of Oxynitride Glasses. In: Kovove Materialy. 41 c. 3, 2003, p. 145 - 157 [microhardness, oxynitride glass, lanthanides, nitrogen].

Frantisek Lofaj, V. Luprano: Cavitation asymmetry in silicon nitride by scanning laser acoustic microscopy. In: Journal of Materials Science. 38, 2003, p. 2393 - 2399.

Frantisek Lofaj, F. Dorcakova: The Effect of Lanthanides on Viscosity of RE-Si-MG-O-N Glasses. In: Matalurgija. 42 (4), 2003, p. 229 - 333 [Lanthanides, Oxynitride glass, Viscosity, Glass transition temperature, Cationic field strength ].

Frantisek Lofaj, P. Hvizdos, F. Dorcakova, R. Satet, M. J. Hoffmann, A. R. de Arellano-Lopez: Identation moduli and microhardness of RE-Si-Mg-O-N- glasses (RE=Sc, Y, La, Sm, Yb and Lu) with different nitrogen content. In: Materials Science and Engineering A. 357, 2003, p. 181 - 187 [Identation modules; Hardness; Oxynitride glassk, Rare earth elements].

Frantisek Lofaj, V. Luprano: Cavitation asymmetry in silicon nitride by scanning laser acoustic microscopy. In: Journal of Materials Science. 38, 2003, p. 2393 - 2399.

Frantisek Lofaj, R. Satet, M. J. Hoffmann, A. R. de Arellano Lopez: Thermal expansion and glass transition temperature of the rare-earth doped oxynitride glasses. In: J. of the European Ceramic Society. 24, 2004, p. 3377 - 3385 [Glass; Glass transition temperature; Hardness; Oxynitride glass; Thermal expansion].

F. Kremer, J.M.J. Lopes, F.C. Zawislak, P.F.P. Fichtner: Low temperature aging effects on the formation of Sn nanoclusters in SiO2/Si films and interfaces. In: Applied Physics Letters. 91, 2007, p. 109733-1 - 109733-3.

M.P.F. de Godoy, M.K.K. Nakaema, F. Iikawa, M.J.S.Brasil, J.M.J. Lopes et al.: Structural and optical properties of InP quantum dots on GaAs(001). In: Journal of Applied Physics. 101 , 2007, p. 073508.

J.M.J. Lopes, M. Roeckerath, T. Heeg, U. Littmark, J. Schubert, S. Mantl et al. : La-based ternary rare-earth oxides as alternative high-k gate dielectrics. In: Microelectronic Engineering . 84 , 2007, p. 1890 [related to the research project sponsored by AvH ].

J.M.J. Lopes, U. Littmark, M. Roeckerath, St. Lenk, J. Schubert, S. Mantl et al.: Effects of annealing on the electrical and interfacial properties of amorphous lanthanum scandate high-k films prepared by molecular beam deposition. In: Journal of Applied Physics . 101, 2007, p. 104109 [related to the research project sponsored by AvH].

V.V. Afanasev, S. Shamuilia, M. Badylevich, A. Stesmans, L.F. Edge, W. Tian, D.G. Schlom, J.M.J. Lopes, J. Schubert et al. : Electronic structure of silicon interfaces with amorphous and epitaxial insulating oxides: Sc2O3, Lu2O3, LaLuO3. In: Microelectronic Engineering . 84, 2007, p. 2278 [related to the research project sponsored by AvH].

J.M.J. Lopes, M. Roeckerath, T. Heeg, E. Rije, J. Schubert, S. Mantl et al. : Amorphous lanthanum lutetium oxide thin films as an alternative high-k gate dielectric. In: Applied Physics Letters. 89, 2006, p. 222902 [related to the research project sponsored by AvH].

J.M.J.Lopes, E. Durgun Özben, M. Roeckerath, U. Littmark, R. Lupták, St. Lenk, M. Luysberg, A. Besmehn, U. Breuer, J. Schubert, and S. Mantl: Amorphous ternary rare-earth gate oxides for future integration in MOSFETs. In: Microelectronic Engineering . 86, 2009, p. 1646.

J.M.J. Lopes, U. Littmark, M. Roeckerath, E. Durgun Özben, S. Lenk, U. Breuer, A. Besmehn, A. Stärk, P.L. Grande, M.A. Sortica, C. Radtke, J. Schubert, S. Mantl: Isotopic labeling study of oxygen diffusion in amorphous LaScO3 high-k films on Si(100) and its effects on the electrical characteristics. In: Applied Physics A-Materials Science & Processing. 96 (2) , 2009, p. 447.

J.M.J.Lopes, E. Durgun-Özben, M. Roeckerath, U. Littmark, R. Lupták, S. Lenk, A. Besmehn, U. Breuer, J. Schubert, and S. Mantl: Rare-earth based alternative gate dielectrics for future integration in MOSFETs. In: Proceedings of the 10th International Conference on Ultimate Integration on Silicon (10th ULIS) ISBN: 978-1-4244-3705-4. 2009, p. 99 - 102.

M. Roeckerath, J.M.J. Lopes, E. Durgun Özben, C. Sandow, S. Lenk, T. Heeg, J. Schubert, S. Mantl: Gadolinium scandate as an alternative gate dielectric in field effect transistors on conventional and strained silicon. In: Applied Physics A-Materials Science & Processing DOI: 10.1007/s00339-008-4962-8 . 94, 2009, p. 521.

S. Shamuilia, V. V. Afanas’ev, A. Stesmans, I. McCarthy, S. A. Campbell, M. Boutchich, M. Roeckerath, T. Heeg, J.M.J. Lopes, and J. Schubert: Photoconductivity of Hf-based binary metal oxide systems. In: Journal of Applied Physics DOI: 10.1063/1.3020520. 104, 2008, p. 111103.

S. Shamuilia, V. V. Afanas’ev, A. Stesmans, I. McCarthy, S. A. Campbell, M. Boutchich, J. M. J. Lopes, M. Roeckerath, T. Heeg, E. Rije, S. Mantl: Photoconductivity of Hf-based binary metal oxides. In: Microelectronic Engineering DOI: 10.1016/j.mee.2008.09.016. 85, 2008, p. 2400.

E. Durgun Özben, J.M.J. Lopes, M. Roeckerath, St. Lenk, B. Holländer, Y. Jia, D. G. Schlom, J. Schubert, S. Mantl: SmScO3 thin films as an alternative gate dielectric. In: Applied Physics Letters DOI: 10.1063/1.2968660 . 93, 2008, p. 052902.

M. Roeckerath, J.M.J. Lopes, T. Heeg, J.Schubert, S. Lenk, S.Mantl: Fully depleted SOI- and sSOI-MOSFETs with GdScO3 as gate dielectric. In: Proceedings of the 9th International Conference on Ultimate Integration on Silicon (9th ULIS) ISBN: 978-1-4244-1729-2 . 2008, p. 115 - 117.

J.M.J. Lopes, M. Roeckerath, T. Heeg, J. Schubert, U. Littmark, S. Mantl, A. Besmehn, P. Myllymäki, L. Niinistö, C. Adamo, D. G. Schlom: Amorphous lanthanum lutetium oxide thin films as an alternative high-κ material. In: ECS Transactions DOI: 10.1149/1.2779570. 11(4), 2007, p. 311.

M. Roeckerath, T. Heeg, J.M.J. Lopes, J. Schubert, S. Mantl, A. Besmehn et al.: Characterization of lanthanum lutetium oxide thin films grown by atomic layer deposition as an alternative gate dielectric . In: Thin Solid Films DOI: 10.1016/j.tsf.2008.08.064 . 517, 2008, p. 201.

M.P.F. de Godoy, M.K.K. Nakaema, J.M.J. Lopes, M.J. Morschbacher, F. Iikawa, M.J.S.P. Brasil, R. Magalhaes-Paniago, J.R.R. Bortoleto, M.A. Cotta: Structural and optical properties of InP quantum dots grown on GaAs (001). In: Physica Status Solidi C - Current Topics in Solid State Physics DOI: 10.1002/pssc.200673248 . 4(2) , 2007, p. 238.

A.B. Veloso, M.K.K. Nakaema, M.P.F. Godoy, J.M.J. Lopes, F. Iikawa, M.J.S. Brasil et al.: Carrier dynamics in stacked InP/GaAs quantum dots. In: Applied Physics Letters DOI: 10.1063/1.2789705 . 91, 2007, p. 121917.

J.M.J. Lopes, F.C. Zawislak, P.F.P. Fichtner, F.C. Lovey, A.M. Condó: Effect of annealing atmosphere on the structure and luminescence of Sn-implanted SiO2 layers . In: Applied Physics Letters DOI: 10.1063/1.1849855. 86, 2005, p. 023101.

J.M.J. Lopes, F.C. Zawislak, P.F.P. Fichtner, R.M. Papaléo, F.C. Lovey, A.M. Condó, A. Tolley: Formation of epitaxial beta-Sn islands at the interface of SiO2/Si layers implanted with Sn ions. In: Applied Physics Letters DOI: 10.1063/1.1927710 . 86, 2005, p. 191914.

J.M.J. Lopes, P.F.P. Fichtner, F.C. Kremer, F.C. Zawislak: Correlation between structural evolution and photoluminescence of Sn nanoclusters in SiO2 layers”, Nucl. Inst. Meth. Phys. Res. B 242 (2006) 1890. DOI: 10.1016/j.nimb.2005.08.013 . In: Nucl. Inst. Meth. Phys. Res. B DOI: 10.1016/j.nimb.2005.08.013 . 242, 2006, p. 1890.

J.M.J. Lopes, F.C. Zawislak, P.F.P. Fichtner, M. Behar, L. Rebohle, W. Skorupa: Pre-irradiation memory effect on the photoluminescence intensity of Ge-implanted SiO2 layers”, Nucl. Instr. Meth. Phys. Res. B 218 (2004) 438. DOI: 10.1016/j.nimb.2003.12.025. In: Nucl. Instr. Meth. Phys. Res. B DOI: 10.1016/j.nimb.2003.12.025. 218, 2004, p. 438.

J.M.J. Lopes, F.C. Zawislak, P.F.P. Fichtner, M. Behar, L. Rebohle, W. Skorupa: Cluster coarsening and luminescence emission intensity of Ge nanoclusters in SiO2 layers”, Journal of Applied Physics. 94 (2003) 6059. DOI: 10.1063/1.1616995. In: Journal of Applied Physics DOI: 10.1063/1.1616995. 94, 2003, p. 6059.

J.M.J. Lopes, F.C. Zawislak, P.F.P. Fichtner, M. Behar, L. Rebohle, W. Skorupa: Photoluminescence of Ge nanoclusters in ion implanted SiO2. In: In Progress in semiconductors II - electronic and optoelectronic applications. (Mater. Res. Soc. Symp. Proc.). ISBN: 1-55899-681-8. 744, 2003, p. 519 - 524.

Kushan, S.R., Uzun, I., Dogan, B. And Mandal, H.,: Experimental and Finite Element Study of the Thermal Conductivity of a-SiAlON Ceramics. In: Journal of the Amerýcan Ceramic Society. 90, 2007, p. 3902 - 3907 [Ceramic Materials].

Ceylan, A.,Suvaci, E., Mandal, H., : Utilization af a Phosphate Ester as a Dispersant for SiAlON Based Ceramics. In: Materials Science Forum. 554, 2007, p. 71 - 77 [Ceramic Materials].

Kushan, S.R., Tamsu, N., Acikbas, N.C., Suvaci, E., Mandal, H., : Textured a-SiAlON Ceramics via Templated Grain Growth. In: Materials Science Forum. 554, 2007, p. 79 - 84 [Ceramic Materials].

Kushan, S.R., Acikbas, N.C., Krestan, P., Sajgalik, Mandal, H., : Role of a-SiAlON Nuclei Addition on the Rod-Like Y-Sm a-SiAlON Formation. In: Materials Science Forum. 554, 2007, p. 101 - 106 [Ceramic Materials].

Acikbas, N.C., Kara, A., Turan, S., Kara, F., Mandal, H and Bitterlich : Influence of Type of Cations on Intergranular Phase Crystallisation of SiAlON Ceramics. In: Materials Science Forum. 554, 2007, p. 119 - 122 [Ceramic Materials].

Acikbas Calis, N, Suvaci, E., Mandal, H., : Fabrication of Functionally Graded SiAlON Ceramics by Tape Casting. In: Journal of The American Ceramic Society . 89 , 2006, p. 3255 - 3257 [Ceramic Materials].

Kurama, S, Cigdemir, G, Mandal, H, Herrmann, M., : Sr2+-Mg2+- Doped SiAlON Ceramics. In: Journal of The American Ceramic Society . 89, 2006, p. 714 - 716 [Ceramic Materials].

Ayas, E., Kara, A., Mandal, H., Turan, S., Kara, F., : Production a-B SiAlON-TiN / TiCN Composites by Gas Pressure Sintering. In: Silicates Industriels Special Issue, Journal of the Belgian Ceramic Society. 69, 2004, p. 287 - 292 [Ceramic Materials].

Kalemtas, A., Kara, A., Kara, F., Mandal, H., Aktug, B., : Joining of SiAlON Ceramics to Pyrex Glass. In: Silicates Industriels Special Issue, Journal of the Belgian Ceramic Society. 69, 2004, p. 219 - 224 [Ceramic Materials].

Calis, N., Kushan, S.R., Kara, F., Mandal, H., : Functionally Graded SiAlON Ceramics. In: Journal of European Ceramic Society. 24, 2004, p. 3387 - 3393 [Ceramic Materials].

Ayas E., Kara, A., Mandal, H., Turan, S., Kara, F., : Decolouration Effect of WC Addition on Gas Pressure Sintered a - B SiAlON Ceramics. In: Materials Letters. 58, 2004, p. 1498 - 1501 [Ceramic Materials].

Kara, F., Kara, A., Turan, S., Mandal, H., : Pressing Behavious of Spray Dried Alumina Zirconia Granules. In: Key Engineering Materials. 264-268, 2004, p. 233 - 236 [Ceramic Materials].

Kushan, S.R., Mandal, H., : Effect of Different Nucleation Temperatures on the Microstructural Development of a -SiAlON Ceramics. In: Key Engineering Materials. 264-268, 2004, p. 1099 - 1102 [Ceramic Materials].

Kurama, S., Mandal, H., : Microstructural Evolution R- a -SiAlON Ceramics (R=Y,Y+Sm and Sm). In: Key Engineering Materials. 264-268, 2004, p. 1103 - 1106 [Ceramic Materials].

Kurama, S., Mandal, H., : Formation of a -SiAlON Ceramics Containing Scandium. In: Key Engineering Materials. 264-268, 2004, p. 1107 - 1110 [Ceramic Materials].

Kurama, S., Mandal, H., : Mg+2 and Ce+3 Doped a -SiAlON: Processing, Microstructure and Properties. In: Key Engineering Materials. 264-268, 2004, p. 1111 - 1114 [Ceramic Materials].

Topates, G., Mandal, H., : Producing cordierite from local magnesium sources. In: Key Engineering Materials. 264-268, 2004, p. 233 - 236 [Ceramic Materials].

Calis, N., Kara, A., Kara, F. and Mandal, H., : Development of Laminar Type Functionally Graded SiAlON Ceramics. In: Key Engineering Materials. 264-268, 2004, p. 1095 - 1099 [Ceramic Materials].

Kurama, S., Herrmann, M. ve Mandal, H., : The Design of Composition for Multi-Cation Doped a - B SiAlON Ceramics by Rietveld Method. In: Key Engineering Materials. 237, 2003, p. 59 - 64 [Ceramic Materials].

Mandal, H., Kara, F., Turan S. ve Kara, A., : Novel SiAlON Ceramics for Cutting Tool Applications. In: Key Engineering Materials. 237, 2003, p. 193 - 202 [Ceramic Materials].

Kushan, S. R. ve Mandal, H., : The Effect of Different Nucleation Temperatures on the Grain Morphology of a -SiAlON Ceramics. In: Key Engineering Materials. 237, 2003, p. 169 - 174 [Ceramic Materials].

Turan, S., Kara, F. ve Mandal, H., : Transmission Electron Microscopy of SrO Containing Multi-Cation Doped a -SiAlON Ceramics. In: Materials Science Forum. 383, 2002, p. 37 - 42 [Ceramic Materials].

Herrmann, M., Kurama, S., ve Mandal, H., : Investigation of the Phase Composition and Stability of the a -SiAlONs by the Rietveld Method. In: J.Eur. Ceram. Soc.. 22, 2002, p. 2997 - 3005 [Ceramic Materials].

Kurama, S., Herrmann, M. ve Mandal, H., : The Effect of Processing Conditions, Amount of Additive and Composition on the Microstructures and Mechanical Properties of a-SiAlON Ceramics. In: J.Eur. Ceram. Soc.. 22, 2002, p. 109 - 119 [Ceramic Materials].

Kushan, S. R. ve Mandal, H., : Effects of Different Si3N4 Starting Powders and Sintering Conditions on the Grain Morphology and Mechanical Properties of a -SiAlON Ceramics. In: Key Engineering Materials. 206-213, 2002, p. 417 - 420 [Ceramic Materials].

Mandal, H., Kara, F., Turan, S. ve Kara, A., : Performance of New a - B SiAlONs in Turning Operations. In: Key Engineering Materials. 206-213, 2002, p. 929 - 932 [Ceramic Materials].

Kurama, S., Herrmann, M. ve Mandal, H., : Improvement of Elongated a -SiAlON Ceramics by Variation of the Processing Conditions and Amounts of Additives. In: Key Engineering Materials. 206-213, 2002, p. 1009 - 1012 [Ceramic Materials].

Kushan, S. R. ve Mandal , H., : Effect of the type of starting Si3N4 powder and sintering conditions on the grain morphology of a -SiAlON ceramics. In: Materials Science Forum. 383, 2002, p. 31 - 36 [Ceramic Materials].

Kushan, S.R. ve Mandal, H., : Effect of Starting Si3N4 Powder Type and Sintering Conditions on the Grain Morphology of a -SiAlON Ceramics. In: British Ceramic Transactions. 101, 2002, p. 35 - 37 [Ceramic Materials].

Van Krevel J.W.H., Van Rutten J.W.T., Hintzen H.T., Metselaar R. and Mandal H., : On the Luminescence of Rare Earth Doped alpha-SiAlON Materials. In: J. Sol. State Chem. 165, 2002, p. 19 - 24 [Ceramic Materials].

Mandal, H. ve Thompson, D. P., : New Heat Treatment Methods for the Optimization and Improvement of SiAlON Ceramics. In: J. Mater. Science. 35, 2001, p. 6285 - 6292 [Ceramic Materials].

Mandal, H., Oberacker, R., Hoffmann, M. J. ve Thomspon, D. P., : a -SiAlON Ceramics Densified with Mixed Oxide Sintering Additives. In: Materials Science Forum. 325-326, 2000, p. 207 - 212 [Ceramic Materials].

Mandal, H. ve Hoffmann, M. J., : Hard and Tough a -SiAlON Ceramics. In: Materials Science Forum. 325-326, 2000, p. 219 - 224 [Ceramic Materials].

Joerg-Bernd Bonekamp Adam J. Moule Klaus Meerholz: Detailed Study of the decay mechanism in polymeric OLEDs. In: Proceedings of the International Society of Optical Engineering. 5937, 2005, p. 178 - 183 [OLED, degradation, polymer].

Adam J. Moule, Joerg-Bernd Bonekamp, Alexander Ruhl, Heike Klesper, Klaus Meerholz: The effect of layer thickness on the efficiency of polymer solar cells. In: Proceedings of the International Society of Optical Engineering. 5937, 2005, p. 21 - 27 [polymer, solar cells, photovoltaic, interference].

Adam J. Moule, Joerg Bernd Bonekamp, Klaus Meerholz: The effect of active layer thickness on the performance of bulk-heterojunction solar cells. In: journal of Applied Physics. 100, 2006, p. 094503-1 - 094503-7 [polymer, solar cells, efficiency, interference, photovoltaic].

Adam J. Moule, Klaus Meerholz: Minimizing optical losses in bulk-heterojunction polymer solar cells. In: Applied Physics B. 86, 2007, p. 721 - 727 [polymer, bulk-heterojunction, interference, solar cells, photovoltaic].

Adam J. Moule, Klaus Meerholz : Interference method for the determination of the complex refractive index of thin polymer layers. In: Applied Physics Letters. 91, 2007, p. 061901-1 - 061901-3 [refractive index, solar cells, polymer, thin film, interference].

T.P. Yadav, N.K.Mukhopadhyay, R.S. Tiwari and O.N. Srivastava: Characterization of Mechanically Milled Al65Cu20Fe15 Icosahedral Quasicrystalline Alloy. In: Transanction of Indian Institite of Metals . 56, 2003, p. 577 - 581 [Mechanical Milling/Alloying, Quasicrystal, Nanocrystal, Electron microscopy, B2 phase.].

N.K. Mukhopadhyay, Jatin Bhatt, A.K. Pramanick, B.S. Murty, P. Paufler: Synthesis of Nanocrystalline/Quasicrystalline Mg32(Al,Zn)49 by Melt Spinning and Mechanical Milling. In: Journal of Materials Science. 39, 2004, p. 5155 - 5159 [Nanocrystals, Nanoquasicrystals, Mechanical Milling, Melt Spinning, Mg32(Al,Zn)49 Frank Kasper Intemetallics, Microindentation ].

N.K. Mukhopadhyay: Analysis of microhardness data using the normalised power law equation and energy balance model. In: Journal of Materials Science. 40, 2005, p. 241 - 244 [Microhardness, Meyer's power law, Energy balance model, Indentation size effect, True Hardness.].

M. Reibold, A. Belger, N.K. Mukhopadhyay, P. Gille and P. Paufler: The impact of nanoindentation at room temperature upon the real structure of decagonal AlCoNi quasicrystals . In: Physica Status Solidi. 202, 2005, p. 2267 - 2277 [Nanoindentation, nanocrystallization, quasicrystals.].

N.K. Mukhopadhyay, V.S. Sarma and S. Shankaran,: An analysis of the microindentation data obtained from a thermomechanically processed multiphase microalloyed steel. In: Trans Indian Institute of Metals . 58, 2005, p. 809 - 818 [Microindentation, Steel, Indentation size effect].

N.K. Mukhopadhyay, A. Belger, P. Paufler and P. Gille 86, (2006) 999: Micro- and nanoindentation studies of Al-Co-Ni single decagonal quasicrystals. In: Philosophical Magazine . 86, 2006, p. 999 - 1005 [Decagonal quasicrystals, nanoindentations, Shear bands, pop-ins].

N.K. Mukhopadhyay and P. Paufler .51 (2006) 209-245. : Micro- and nanoindentation techniques for mechanical characterization of Materials. In: Inernational Materials Reviews . 51, 2006, p. 209 - 245 [Micro-indentation, Nanoindentation, Automated ball indentation, Indentation size effect].

N.K. Mukhopadhyay, A. Belger, P. Paufler and D.H. Kim : Nanoindentation studies Cu based bulk metallic glasses. In: Materials Science and Engineering A. 449-451, 2007, p. 954 - 957 [Bulk metallic glasses, nanoindentation, phase transformation].

H. Wei, L. Meng, Y. Jun, and D. J. Norris: Quantifying Stacking Faults and Vacancies in Thin Convectively Assembled Colloidal Crystals. In: Applied Physics Letters. 89, 2006, p. 241913 [colloidal crystals, photonic crystals, self assembly, convective assembly].

D. J. Norris: Photonic Crystals: A View of the Future. In: Nature Materials. 6, 2007, p. 177 - 178 [photonic crystals, self-assembly, colloidal crystals, photonic band gap].

D. J. Norris: Materials Science: Silicon Life Forms. In: Nature. 446, 2007, p. 146 - 147 [biomimetic materials, diatoms, biologicaly inspired, photonics].

E. Sudhakar Reddy, J. Noudem et al.: A process for a new form of YBa2Cu3Oy having dimensions if thickfilms and microstructure of single domain bulks. In: Proc. M2HTSC, Houston/USA. 2000.

Shin-ichi Orimo, Frank Kimmerle, Günter Majer: Hydrogen in nanostructured vanadium-hydrogen systems. In: Physical Review B. 63, 2001, p. 094307-1 - 094307-10.

Humberto Palza Susana Filipe Ingo F.C. Naue Manfred Wilhelm: Correlation between Polyethylene Topology and Melt Flow Instabilities by Determining In-Situ Pressure Fluctuations and Applying Advanced Data Analysis. In: Polymer. 51, 2010, p. 522 - 534 [Melt flow instabilities Sharkskin Polyolefins].

Bala Srinivasan, P., Dietzel, W., Zettler, R., dos Santos, J.F. and Sivan, V : Effect of inhibitors on the corrosion behaviour of a dissimilar aluminium alloy friction stir weldment. In: Corrosion Engineering Science and Technology. 42, 2007, p. 161 - 166 [ ].

Prasad Rao, K., Angamuthu, K. and Bala Srinivasan, P: Fracture toughness of electron beam welded Ti6Al4V. In: Journal of Materials Processing Technology. 199, 2008, p. 185 - 192 [ ].

Bala Srinivasan, P., and Satish Kumar, M.P : Characterization of a thin section dissimilar weld joint comprising austenitic and ferritic stainless steels. In: Materials Science and Technology. 24, 2008, p. 392 - 398 [ ].

Suman Pokhrel and K. S. Nagaraja : Solid state electrical conductivity studies and humidity sensing properties of Cr2O3-MoO3 composites. In: phys. stat. sol(a). 194, 2002, p. 140 - 146.

Aleksei Pozdnyakov, K. Friedrich, V. V. Kudryavtsev: Effects of thermal treatment on the wear behavior of polyimide-fullerene (C60) composite coatings. In: Journal of Materials Science Letters. 20, 2001, p. 2071 - 2075 [polyimide, tribology, thermal properties].

Aleksei Pozdnyakov, V. V. Kudryavtsev, K. Friedrich: Sliding wear of polyimide-C60 composite coatings. In: Wear. 254, 2003, p. 501 - 513 [Polymide, Fullerene C60, Wear].

Aleksei Pozdnyakov: Mass Spectrometric Research of Polymer-fullerene Composites. In: Fullerene Research Advances. (Ed. Carl N. Kramer) USA, NY: Nova Science Publishers, 2007, p. 97 - 115 [nanocomposite, mass-spectrometry, fullerene, thermal properties, wear, polymer].

Aleksei Pozdnyakov, Klaus Friedrich: Thermal and Wear Studies of Polymer-Fullerene Composites. In: Leading-Edge Composite Material Research. (Ed. Tobias G. Wouters) USA, NY: Nova Science Publishers, 2008, p. 331 - 346 [nanocomposite, polymer, fullerene, wear, thermal properties].

A. O. Pozdnyakov, M.M. Brzhezinskaya, A.S. Vinogradov, K. Friedrich: NEXAFS spectra of polymer-nanocarbon composites. In: Fullerenes, Nanotubes, and Carbon Nanostructures. 16, 2008, p. 1 - 5 [nanocomposite, polymer, fullerene, composite, NEXAFS, mass-spectrometry, thermal desorption].

M.E. Cagiao, A.O. Pozdnyakov, M. Krumova, V.V. Kudryavtsev, F.J. Baltá Calleja: Nanostructure evolution during thermal treatment of polyimide-fullerene composites as revealed by WAXS and SAXS. In: Composites Science and Technology. 67, 2007, p. 2175 - 2182 [polyimide, fullerene, X-ray diffraction, thermal properties].

Ujjwal Prakash, G. Sauthoff: Structure and properties of Fe-Al-Ti intermetallic alloys. In: Intermetallics. 9, 2001, p. 107 - 112 [A. Iron aluminides (based on Fe3Al); A. Iron aluminides (based on FeAl); B. Mechanical properties at high temperatures; B. Mechanical properties at ambient temperature].

X.Y. Qin, J.S. Lee, C.S. Lee: Microstructures and Mechanical behavior of bulk Nanocrystalline Gamma-Ni-Fe Produced by a Mechanochemical Method. In: Journal of Materials Research. 17, 2002, p. 991 - 1001 [Nanocrystalline material, Microstructure and mechanical behavior, Ni-Fe alloy ].

X.Y. Qin, X.G. Zhu, S. Gao, L.F. Chi, J.S. Lee: Temperature Dependence of Compressive behavior of bulk nanocrystalline Ni-Fe. In: Scripta Materialia. 46, 2002, p. 611 - 616 [Nanocrystalline Material, Mechanical properties].

David Rafaja, Hartmut Fuess, Daniel Simek, Jiri Kub, Josef Zweck, Jitka Vacinova, Vaclav Valvoda: X-ray reflectivity of multilayers with non-continuous interfaces. In: Journal of Physics: Condensed Matter. 14, 2002, p. 5303 - 5314.

Rajeev Ranjan, Anupriya Agrawal, Anatoliy Senyshyn and Hans Boysen: Crystal structures of high temperature quantum paraelectrics Na_{1/2}Nd_{1/2}TiO_{3} and Na_{1/2}Pr_{1/2}TiO_{3}. In: Journal of Physics: Condensed Matter. 18, 2006, p. L515 - L522 [Quantum paraelectrics, perovskite, ferroelectrics].

Rajeev Ranjan, Anupriya Agrawal, Anatoliy Senyshyn and Hans Boysen: Phases in the system Na_{1/2}Nd_{1/2}TiO_{3}¿SrTiO_{3}:a powder neutron diffraction study. In: Journal of Physics: Condensed Matter. 18, 2006, p. 9679 - 9690 [Perovskite, phase transition, ferroelectrics].

Rajeev Ranjan, Anatoliy Senyshyn, Hans Boysen, Carsten Baehtz, and Friedrich Frey: Crystal structures of Na_{1/2}Ln_{1/2}TiO_{3} (Ln: La, Eu, Tb). In: Journal of Solid State Chemistry. 180, 2007, p. 995 - 1001 [Perovskites, quantum paraelectrics, ferroelectrics].

Rajeev Ranjan, Anatoliy Senyshyn Vladimir Vashook, Rainer Niewa Hans Boysen and Friedrich Frey: Structural stability of conducting oxide CaRuO3 at high temperatures. In: Applied Physics Letters. 90, 2007, p. 251913-1 - 251913-3 [ruthenates, neutron powder diffraction, perovskite].

Rajeev Ranjan, Hasan Sadat Nabi, and Rossitza Pentcheva.: Electronic structure and magnetism of EuTiO3: a first principles study. In: Journal of Physics Condensed Matter. 19, 2007, p. 406217-1 - 406217-9 [Perovskite, Multiferroic, First principles].

Wear quantification. In: ASME J. Tribology. 122, 2000, p. 650 - 656.

A. Ravikiran, S. Jahanmir: Effect of interfacial layers on wear behavior of a dental glass-ceramic. In: J. American Ceramic Soc.. 83, 2000, p. 1831 - 1833.

Effect of sliding conditions on formation of grain-pits due to wear anisotropy. In: J. Mat. Sci. Lett.. 19, 2000, p. 1041 - 1043.

Influence of apparent pressure on wear behavior of self mated alumina. In: J. American Ceramic Soc.. 83, 2000, p. 1302 - 1304.

Wear mechanism based on wear anisotropy. In: STLE Tribology Transactions. 43, 2000, p. 287 - 292.

A. Ravikiran, T.S. Low: Nano-wear mechnism of amorphous carbon thin films. In: Tribology Lett.. 8, 2000, p. 41 - 43.

A. Ravikiran, T.S. Low: Estimation of lubricant thickness on magnetic hard disk using acoustic emission. In: Rev. Sci. Instruments. 71, 2000, p. 1915 - 1916.

P. Sajgalik, M. Hnatko et al.: SiC/Si3N4 nano/micro-composite - processing, RT and HT mechanical properties. In: J. European Ceramic Soc.. 20, 2000, p. 453 - 462.

Pavol Sajgalik, Miroslav Hnatko, Peter Copan, Zoltan Lences, Jow-Lay Huang: Influence of Graphite Additives on Wear Properties of Hot Pressed Si3N4 Ceramics. In: J. of the Ceramic Society of Japan. 114 (11), 2006, p. 1061 - 1068 [Wear resistance, Si3N4, Microstructure].

M. Balog, J. Keckes, T. Schöberl, D. Galusek, F. Hofer, J. Krest'an, Z. Lences, J.-L. Huang, Pavol Sajgalik: Nano/macro-hardness and fracture resistance of Si3N4/SiC composites with up to 13 wt.% of SiC nano-particles. In: J. of the European Ceramic Society. 27, 2007, p. 2145 - 2152 [Si4N4; SiC; Hardness; Nano-hardness; Toughness and toughening; Nanocomposites].

J. Krest'an, O. Pritula, L. Smrcok, Pavol Sajgalik, Z. Lences, A. Wannberg, F. Monteverde: Corrosion of beta-sialon-based ceramics by molten steel. In: J. of the European Ceramic Society. 27, 2007, p. 2137 - 2143 [Corrosion; Sialon; Steel].

Z. lences, K. Hirao, S. Kanzaki, M. J. Hoffmann, Pavol Sajgalik: Reaction sintering of fluorine-dopes MgSiN2. In: J. of the European Ceramic Society. 24, 2004, p. 3367 - 3375 [Hardness; MgSiN2; Nitrides; sintering; Strength; Thermal properties].

Zoltan lences, Kiyoshi Hirao, Pavol Sajgalik, Michael J. Hoffmann: Thermodynamic and Dielectric Properties of MgSiN2 Ceramics. In: Key Engineering Materials . 317-318, 2006, p. 857 - 860 [magnesium silicon nitride, thermodynamics, decomposition, mechanical properties, dielectric constant ].

Pavol Sajgalik, Zoltan Lences: Multifunctional Ceramic Nanocomposites with Self-Diagnostic Ability of Catastrophic Damage. In: Encyclopedia of Nanoscience and Nanotechnology. 2005, p. 1 - 10.

Miroslav Balog, Pavol Sajgalik, Zoltan lences, Miroslav Hnatko, Jozef Keckes, J.-L. Huang, J. Janega, R. Horvathova: Nano-indentation of SiC and Si3N4/SiC ceramic materials. In: Key Engineering Materials. 290, 2005, p. 272 - 275 [hardness, nano-indentation, modulus, SiC, Si3N4].

David Salamon, Pavol Sajgalik, Miroslav Liska: Mechanical properties and microstructure of alpha-Sialon based cutting tools. In: Key engineering Materials . 290, 2005, p. 250 - 253 [Sialon, cutting tools, mechanical properties].

Jianjun Sha: Strength of Materials: New Research Trends. NY: Nova Science Publisher, 2009, 65 pp. [High temperature mechanical properties; Ceramic materials].

Jianjun Sha: Ceramic Matrix Composites. NY: Nova Science Publisher, 2009, in press pp. [Ceramic Composites; Residual stress, ].

A. Simchi et al.: A new steel powder mixture for direct laser sintering. In: Rapid Prototyping & Tooling Newslett.. 4, 2000, p. 4 - 5.

Abdolreza Simchi, H. Danninger, C. Gierl: Electrical Conductivity and Microstructure of Sintered Ferrous Materials; Iron-Graphite Compacts. In: Powder Metallurgy. 44 No. 2, 2001, p. 148 - 156.

Abdolreza Simchi, H. Pohl, M. Issa, H. Calefi Dias: Thermal Stresses in Direct Metal Laser Sintering. Austin: The University of Texas at Austin, 2001.

Abdolreza Simchi, F. Petzoldt, H. Pohl: Direct Metal Laser Sintering: Materials Considerations and Mechanisms of Particle Bonding. In: Int. J. Powder Metallurgy. 37 No. 2, 2001, p. 49 - 61.

Abdolreza Simchi, F. Petzoldt, H. Pohl, H. Löffler: Direct Laser Sintering of a Low Alloy P/M Steel. In: J. P/M Science & Tech. Brief. 3 No. 1, 2001, p. 5 - 9.

Abdolreza Simchi, H. Pohl: Effects of Laser Sintering Processing Parameters on the Microstructure and Densification of Iron Powder. In: Materials Science and Engineering A. 359, 2003, p. 119 - 128.

Abdolreza Simchi, F. Petzoldt, H. Pohl: On the Development of Direct Metal Laser Sintering for Rapid Tooling. In: J. Materials Processing Technology. 41 , 2003, p. 319 - 328.

A.K. Singh, R.A. Schwarzer: Texture and anisotropy of mechanical properties in titanium and its alloys. In: Zeitschr. Metallkunde. 91/9, 2000, p. 702 - 716.

Ashok Kumar Singh, R.A. Schwarzer: Effect of Mode Of Deformation by Rolling on The Development of Texture in Binary Ti-Mn Alloys. In: Scripta mater. 44, 2001, p. 375 - 380 [Ti-Mn alloys, Crystal texture, Mode of deformation, Cold rolling, Multi-step cross and reverse rolling].

Ashok Kumar Singh, R.A. Schwarzer, J. Sukkau: Discrimination and mapping of phase distributions by automated crystal orientation measurements. In: Materials Science and Technology. 16, 2000, p. 1389 - 1392.

Ashok Kumar Singh, R. A. Schwarzer: Evolutionof texture in pure magnesium during rolling. In: Z. Metallkd.. 96, 4, 2005, p. 345 - 351 [Magnesium; Rolling Texture; Crystal Orientation Maps (COM); EBSD; XRD].

Xiaoyan Song, Markus Rettenmayr, Clemens Müller, Hans Eckart Exner: Modeling of Recrystallization after Inhomogenous Deformation. In: Metallurgical and Materials Transactions A. 32, 2001, p. 2199 - 2206.

Xiaoyan Song, Markus Rettenmayr: Modelling study on recrystallization, recovery and their temperature dependence in inhomogeneously deformed materials. In: Materials Science and Engineering A. 332, 2002, p. 153 - 160 [Recrystallization; Recovery; Inhomogeneous pre-deformation; Monte Carlo medel].

Xiaoyan Song, Markus Rettenmayr, Hans Eckart Exner, Guoquan Liz: Combined Monte-Carlo/Deterministic Modelling of Recovery and Recrystallization. In: Recrystallization and Grain Growth. (Ed. G. Gottstein, D. A. Molodov) Berlin: Springer Verlag, 2001, p. 1013 - 1019 [recovery, recrystallization, nucleation, graded microstructure].

Xiaoyan Song, N. J. Gu, G. Q. Liu, B. Q. Wang: Effects of the volume fraction of particles on the matrix grain growth (chinesisch). In: Acta Metall Sinica . 36 (6), 2000, p. 592 - 596.

Xiaoyan Song, G. Q. Liu, N. J. Gu: 3D visual simulation of grain growth in polycrystalline materials (chinesisch). In: J. Computer Assisted design. 12 (2), 2000, p. 85 - 89.

Xiaoyan Song, G. Q. Liu, N. J. Gu: Simulation research on influence ot hte secon-phase particles quantity on grain growth. In: Z. Metall.. 91 (3), 2000, p. 227 - 231.

Xiaoyan Song, G. Q. Liu, N. J. Gu: Re-analysis on grain size distribution during normal grain growth based on Monte Carlo simulation. In: Scripta Mater.. 43 (4), 2000, p. 355 - 359.

Xiaoyan Song, M. Rettenmayr: Study on the effects of a deformation gradient on recrystallization in a material containing precipitates. In: Scripta Mater.. 48 (8), 2003, p. 1123 - 1128.

Xiaoyan Song, M. Rettenmayr, G. Q. Liu: 3D Simulation Study of Inhomogeneous Microstructure and its Evolution. In: Image Analysis and Stereology. 22 (3), 2003, p. 163 - 171.

Xiaoyan Song: Applicationof mesoscale modeling optimization to development of advanced materials. In: Progress in Natural Science (invited paper). 14 (8), 2004, p. 656 - 663.

Xiaoyan Song, M. Rettenmayr, J. X. Zhang: Recrystalization in multi-phase materials containing particles with a two-class size distribution (chinesisch). In: Acta Metall Sinica. 40 (10), 2004, p. 1009 - 1017.

Xiaoyan Song, X. M. Liu, J. X. Zhang: A "self-adjustin" mechanism of powder microstructure evolution in the process of SPS (chinesisch). In: Chinese Journal of Stereology and Image Analysis. 9 (3), 2004, p. 140 - 146.

G. Q. Liu, Xiaoyan Song, Y. Zhang: Microstructure modelling in the visual products design (chinesisch). In: J. Mechanical Engineering. 11 (8), 2000, p. 939 - 945.

M. Rettenmayr, Xiaoyan Song, M. Oechsle: Simulation of microstructure evolution of platinum alloys for high temperature application. In: Metals. 56 (9), 2002, p. 462 - 466.

M. Rettenmayr, Xiaoyan Song: Modelling microstructure evolution during annealing of an inhomogeneously deformed material. In: Mater. Sci. Technol.. 19 (2), 2003, p. 173 - 177.

B. Q. Wang, Xiaoyan Song, H. J. Li: Spheroidization processing for ultrahigh carbon steels containing Al (chinesisch). In: J. Mater. Sci. Proc.. 12 (4), 2004, p. 337 - 341.

B. Q. Wang, Xiaoyan Song: A new processing of fine-grained UHCs (chinesisch). In: J. Iron and Steel Research. 16 (5), 2004, p. 20 - 25.

N. J. Gu, C. X. Lin, Xiaoyan Song, H. F. Peng: Influence on SME and microstructure in FeMnSiCrNi SMA of strengthening of austenite matrix. In: Mater. Sci. Forum. 327-3, 2000, p. 231 - 234.

G. Q. Liu, H. B. Yu, Xiaoyan Song, X. G. Qin: A new model of three-dimensional grain growth: theory and computer simulation of topology-dependency of individual grain growth rate. In: Mater. Design. 22 (1), 2001, p. 33 - 38.

B. Q. Wang, H. F. Peng, Xiaoyan Song: Spheroidization processing and mechanical properties of forged UHVCs containing Al (chinesisch). In: J. Mater. Heat Treatment. 25 (1), 2004, p. 20 - 24.

H. J. Li, B. Q. Wang, Xiaoyan Song: Effect of Al-alloying on the processing of adjusting microstructures of UHCs (chinesisch). In: J. Tech. of Warm Processing. 11, 2004, p. 80 - 85.

H. J. Li, B. Q. Wang, Xiaoyan Song: A newly-developed processing of spheroidization for UHCs (chinesisch). In: Heat Treatment of Alloys. 29 (9), 2004, p. 46 - 49.

J. X. Zhang, M. Yue, Xiaoyan Song: Development of spark plasma sintering technology and application on advanced materials (chinesisch). In: J. Functional Materials. 35 (9), 2004, p. 94 - 104.

J. P. Gao, J. X. Zhang, Xiaoyan Song: Thermodynamic functions and phase stability of metal nanomaterials (chinesisch). In: J. Functional Materials. 35 (8), 2004, p. 2647 - 2652.

X. M. Liu, J. X. Zhang, Xiaoyan Song: Dicussion on the neck formation mechanism during the process of SPS (chinesisch). In: J. Functional Materials. 35 (9), 2004, p. 3037 - 3039.

N. J. Gu, B. Q. Wang, H. L. Li, C. S. Wen, Xiaoyan Song: The Characters of the Lattice Deformation During Martensitic Transformation. In: Materials Science Forum. 394-395, 2002, p. 213 - 216.

Vikas Chandra Srivastava, Volker Uhlenwinkel, Alwin Schulz, H.-W Zoch, Nilay K. Mukhopadhyay, Sandip G. Chowdhury : Synthesis of single phase i-AlCuFe bulk quasicrystal by spray forming. In: Zeitschrift für Kristallographie. 23, 2008, p. 711 - 715 [Spray forming, quasicrystalline, single phase, AlCuFe, hardness, processing].

Vikas Chandra Srivastava, K.B. Surreddi, V. Uhlenwinkel, A. Schulz, J. Eckert, H.-W. Zoch: Formation of Nanocrystalline Matrix Composite during Spray Forming of Al83La5Y5Ni5Co2. In: METALLURGICAL AND MATERIALS TRANSACTIONS A. 40, 2009, p. 450 - 461 [Nano-crystalline, composite, spray forming, rapid solidification, amorphous].

Vikas Chandra Srivastava, G. B. Rudrakshi, V. Uhlenwinkel and S. N. Ojha : Wear characteristics of spray formed Al-alloys and their composites. In: Journal of Materials Science. 44, 2009, p. 2288 - 2299 [composites, spray forming, wear behavior, Al-Si alloys, liquid immiscible alloys].

Vikas Jindal, Vikas Chandra Srivastava, Volker Uhlenwinkel: On the role of liquid phase stability and GFA parameters. In: Journal of Non-Crystalline Solids. 355, 2009, p. 1552 - 1555 [Liquid alloys, Liquid metals, Glass transition].

Ivo Stloukal, Christian Herzig: Phosphorus grain boundary diffusion and segregation in Fe-2.2 wt.% Si alloy. In: Z. Metallkd.. 93, 2002, p. 88 - 94.

Srecko Stopic, B. Friedrich, R. Fuchs: Kinetics of Sulphuric Acid Leaching of the Serbian Nickel Laternic Ore Under Atmospheric Pressure. In: Journal of Matallurgy. 3 No. 8, 2002, p. 235 - 244 [kinetics, nickel lateritic ore, atmospheric pressure].

Srecko Stopic, Bernd Friedrich, Reinhard Fuchs: Sulphuric Acid Leaching of the Serbian Nickel Lateritic Ore. In: Erzmetall. 56 No. 4, 2003, p. 198 - 203 [Leaching - lateritic ore - Nickel - Kinetics - Sulphuric acid].

Srecko Stopic, Bernd Friedrich, Nikola Anastasijevic: Kinetics of High Pressure Leaching of the Serbian Nickel Lateritic Ore. In: Proceedings of EMC 2003 . 1, 2003, p. 189 - 203.

Srecko Stopic, B. Friedrich, N. Anastasijevic, A. Onjia: Experimental design approach regarding kinetics of high pressure leaching processes. In: Journal of Metallurgy. 4 , 2003, p. 274 - 262 [statistical software, pressure leaching, kinetics, nickel laterite].

Vadlamani Subramanya Sarma, G. Jaeger, A. Koethe: On the comparision of crack closure evaluation using dynamic and static compliance measurements. In: International Journal of Fatigue. 23, 2001, p. 741 - 745 [Fatigue crack growth; Crack closure; Dynamic compliance; Thresholds; Microalloyed steels].

Vadlamani Subramanya Sarma, Vivek Srivastava, Kuppuswamy Anantha Padmanabhan: Influence of Microstructure on the Low and High Cycle Fatigue Behaviour of a Medium Carbon Microalloyed Steel. In: Z. Metallkd.. 92, 2001, p. 1312 - 1318 [Low cycle fatigue; Cyclic loading; Cyclic stress-strain; Ferrite-pearlite; Acicular ferrite; Bainite].

Vadlamani Subramanya Sarma, K.A. Padmanabhan: Load sequence effects in the high cycle fatigue of two ferrite-pearlite microalloyed steels. In: Z. Metallkd.. 93, 2002, p. 244 - 247 [Load sequence, High cycle fatigue, Wöhler curves, Fatigue limit, Dislocation structures].

S Sankaran, V Subramanya Sarma, KA Padmanabhan: Low cycle fatigue behaviour of a multiphase microalloyed medium carbon steel: comparison between ferrite-pearlite and quenched and tempered microstructures. In: Materials Science and Engineering . A345, 2003, p. 328 - 335 [Microalloyed steel, ferrite-bainite-martensite, low cycle fatigue, fracture].

S. Sankaran, Vadlamani Subramanya Sarma, K. A. Padmanabhan, G. Jaeger, A. Koethe: High cycle fatigue behaviour of a multiphase microalloyed medium carbon steel: a comparison between ferrite-pearlite and tempered martensite microstructures. In: Materials Science and Engineering A. 362, 2003, p. 249 - 256 [microalloyed steel; Ferrite-bainite-martensite; High cycle fatigue; Fatigue thresholds; Fatigue crack growth; Crack closure].

M.J. Suk, K. Leonartz: Discontinuous growth of primary naphthalene plate in camphor-naphthalene eutectic system. In: J. Crystal Growth. 208, 2000, p. 809 - 812.

Zhaolin Tang, L. Niewolak, V. Shemet, W.J. Quadakkers, L. Singheiser, and W. Wu: Development of protective coatings for gamma-TiAl based alloys. In: Materials Science and Engineering A. 327, 2002, p. 297 - 301.

Zhaolin Tang, L. Niewolak, V. Shemt, W. J. Quadakkers, L. Singheiser: Protective coatings for gamma-TiAl. In: Materials Week. 2000.

Jadambaa Temuujin, Jose Coronel, Amgalan Minjigmaa, Kenneth MacKenzie: Water content and water evolution from Reaction-Bonded-Aluminum-Oxide (RBAO) powder precursors. In: International Journal of Applied Ceramic Technology. 5, 2008, p. 289 - 294 [RBAO, ceramics, water content, milling, powder precursor].

M. Terrones, H. Terrones et al.: Coalescence of single-walled carbon nanotubes. In: Sci.. 288, 2000, p. 1226 - 1229.

M. Terrones, R. Kamalakaran et al.: Novel nanoscale gas containers: Encapsulation of N2 in CNX nanotubes. In: Chem. Commun.. 2000, p. 2335 - 2336.

R. Kamalakaran, M. Terrones et al.: Synthesis of thick and crystalline nanotube arrays by spray pyrolysis. In: Applied Phys. Lett.. 77/21, 2000, p. 3385 - 3387.

G. Seifert, H. Terrones, M. Terrones, T. Frauenheim: Novel NbS2 metallic nanotubes. In: Solid State Commun.. 115, 2000, p. 635 - 638.

G. Seifert, H. Terrones, M. Terrones et al.: On the electronic structure of WS2 nanotubes. In: Solid State Commun.. 114, 2000, p. 245 - 248.

G. Seifert, H. Terrones, M. Terrones et al.: Structure and electronic properties of MoS2 nanotubes. In: Phys. Rev. Lett.. 85/1, 2000, p. 146 - 149.

Lutz-Michael Berger, Carl Christoph Stahr, Filofteia-Laura Toma, Gunther Stehr, Eckart Beyer: Ausgewählte Entwicklungstendenzen bei der Herstellung thermisch gespritzter keramischer Schichten. In: Jahrbuch Oberflächentechnik, Band 63. (Ed. Hrsg.: R. Suchentrunk, Bad Saulgau) Eugen G. Leuze Verlag, 2007, p. 71 - 84 [thermal spraying, ceramic oxides, coatings, nanostructured materials].

Filofteia-Laura Toma Ghislaine Bertrand Didier Klein Cathy Meunier Sylvie Begin: Development of photocatalytic active TiO2 surafces by thermal spraying technique . In: Journal of Nanomaterials, doi: 10.1155/2008/384171. 2008, 2008, [TiO2, thermal spraying, photocatalysis, nitrogen oxides].

Filofteia-Laura Toma Lutz-Michael Berger Tobias Naumann Stefan Langner: Microstructures of nanostructured ceramic coatings obtained by suspension thermal spraying. In: Surface & Coatings Technology. 202, 2008, p. 4343 - 4348 [APS; HVOF; Suspension; Oxide coating; Nanostructured coating].

Filofteia-Laura Toma Carl-Christoph Stahr Lutz-Michael Berger Tobias Naumann: Suspensionsgespritzte Al2O3-Schichten. In: Tagungsband zum 10. Werkstofftechnischen Kolloquium, 27.-28. September in Chemnitz, Band 26. (Ed. Hrsg: Univ.-Prof. Dr.-Ing. habil. B. Wielage) 2007, p. 105 - 110.

Filofteia-Laura Toma, Lutz-Michael Berger, Carl-Christoph Stahr, Tobias Naumann, Sabine Saaro: Preparation and characterisation of nanostructured ceramic coatings obtained by suspension plasma spraying. In: Proceedings of the 10th Conference and Exhibition of the European Ceramic Society- ECERS 2007. (Ed. J.G. Heinrich and C. Aneziris) Baden-Baden: Göller Verlag, 2007, p. 1201 - 1205 [plasma spraying, suspension, TiO2, Al2O3, nanostructured coating].

Filofteia-Laura Toma, Lutz-Michael Berger, Tobias Naumann, Stefan Langner : Microstructure of nanostructured ceramic coatings obtained by suspension thermal spraying. In: Proceedings of "3èmes Rencontres Internationales sur la Projection Thermique - 3RIPT", 6-7 December 2007, Lille, France, CD-ROM Version. 2007.

Raissa Voitovich, M.H. Gülgün, E. Bischoff, R.M. Cannon, M. Rühle: Microstructural development in alpha-alumina. In: Ceramic Trans.. 118, 2001, p. 113 - 125.

Mehmet Ali Guelguen, Rayisa Voytovych, Ian MacLaren, Manfred Ruehle: Cation segregation on an Oxide Ceramic with low solubility: Yttrium doped alpha-alumina. In: Interface Science. 10, 2002, p. 99 - 110 [alpha-alumina, grain boundary, segregation, adsorption, precipitation].

Ian MacLaren, Rowland Cannon, Mehmet Ali Guelguen, Rayisa Voytovych, Nikoletta Popescu-Pogrion, Christina Scheu, Ulrike Taeffner, Manfred Ruehle: Abnormal grain growth in alumina: Synergetic effects of yttria and silica. In: Journal of American Ceramic Society. 86, 2003, p. 650 - 659 [Alumina, abnormal grain growth, segregation, grain boundary, ceramics ].

Rayisa Voytovych, Ian MacLaren, Mehmet Ali Guelguen, Rowland Cannon, Manfred Ruehle: The effect of yttrium on densification and grain growth in alpha-alumina. In: Acta Materialia. 50, 2002, p. 3453 - 3463 [Sintering; Grain growth; Kinetics; Ceramics; Alumina].

Rayisa Voytovych, Mehmet Ali Guelguen, Manfred Ruehle: Microstructural evolution in Y-doped polycrystalline alumina. In: Transactions JWRI. 30, 2001, p. 425 - 430 [Alumina; Grain boundary; Segregation; Sintering; Grain growth].

Rayisa Voytovych, Lennart Ljungberg, Nicolas Eustathopoulos: Wetting and interfacial reactivity in the AgCuTi/alumina system. In: Scripta Materialia. 51, 2004, p. 431 - 435 [wetting, reactivity, interfaces, CuTiAg alloys, alumina].

Rayisa Voytovych, Jean-Michel Missiaen, Bruno Gilles and Nicolas Eustathopoulos: Solid state spreading in the Cu/Cu system. In: Journal of Materials Science. 40, 2005, p. 2377 - 2381.

Rayisa Voytovych, Coralie Valette, Marie-Francoise Devismes, Nicolas Eustathopoulos: Interfacial reactions in alumina/CuAgTi braze/CuNi system. In: Scripta Materialia. 52, 2005, p. 1 - 6 [Brazing, Adhesion, Reactivity, Alumina, CuNi alloy].

Rayisa Voytovych, Varvara Bougiouri, Noelia Rojo-Calderon, Javier Narciso and Nicolas Eustathopoulos, : The role of the chemical reaction in the infiltration of porous carbon by NiSi alloys. In: Scripta Materialia. 54, 2006, p. 1875 - 1878 [Infiltration, Interfaces, Wetting, Ni alloys, Graphite, Reactivity].

Rayisa Voytovych, Florance Robaut, Nicolas Eustathopoulos: Relation between wetting and interfacial chemistry in CuAgTi/alumina system. In: Acta Materialia. 54, 2006, p. 2205 - 2214 [Wetting, Interfaces; Ceramics, Brazing; Capillary phenomena].

Rayisa Voytovych,Jose-Miguel Molina, Enrique Louis, Nicolas Eustathopoulos: The surface tension of liquid aluminium in high vacuum: the role of surface condition. In: International Journal of Adhesion and Adhesives. 27, 2007, p. 394 - 401 [Aluminium and alloys, Surface tension].

Rayisa Voytovich, Vera Bougiouri, Olivier Dezellus, Nicolas Eustathopoulos: Wetting and reactivity in Ni-Si/SiC system. In: Journal of Materials Science . 42, 2007, p. 2016 - 2023.

Rayisa Voytovich, Roberto Parra, Nicolas Eustathopoulos: Wetting of MgO by Cu2S-FeS melts. In: Metallurgical and Materials Transactions B. 38B, 2007, p. 347 - 349.

Fumihiro Wakai and Fritz Aldinger: Equilibrium Configuration of Particles in Sintering Under Constraint. In: Acta Mater.. 51, 2003, p. 641 - 652.

Jie Wang, Marc Kamlah, Tong-Yi Zhang, Yulan Li, Long-Qing Chen: Size-Dependent Polarization Distribution in Ferroelectric Nanostructures: Phase Field Simulations. In: APPLIED PHYSICS LETTERS. 92, 2008, p. 162905-1 - 162905-3 [ferroelectric nanostructures, Phase field model, Polarization vortex, Size effect].

Jie Wang, Marc Kamlah: Domain structures of ferroelectric nanotubes controlled by surface charge compensation. In: APPLIED PHYSICS LETTERS. 93, 2008, p. 042906-1 - 042906-3 [Domain structures, ferroelectric nanotubes, charge compensation, electrical boundary condition, phase field model ].

Jie Wang, Marc Kamlah: Domain control in ferroelectric nanodots through surface charges. In: APPLIED PHYSICS LETTERS. 93, 2008, p. 262904-1 - 262904-3 [ferroelectric domains, ferroelectric nanostructures, phase field model].

Jie Wang, Marc Kamlah, Tong-Yi Zhang: Phase field simulations of ferroelectric nanoparticles with different long-range-electrostatic and -elastic interactions. In: Journal of Applied Physics. 105, 2009, p. 014104-1 - 014104-8 [dielectric polarisation, elasticity, electric domain walls, ferroelectric materials, Ginzburg-Landau theory, nanoparticles ].

Jie Wang, Marc Kamlah: Intrinsic switching of polarization vortex in ferroelectric nanotubes. In: PHYSICAL REVIEW B. 80, 2009, p. 012101-1 - 012101-4 [Intrinsic switching, polarization vortex , ferroelectric nanotubes].

Ke Wang, D. Wamwangi, S. Ziegler, and M. Wuttig,: Influence of Bi doping upon the phase change characteristics of Ge2Sb2Te5. In: Journal of Applied Physics. 96, 2004, p. 5557 - 5563 [chalcogenide, phase change, optical storage, ultrafast ].

Ke Wang, D. Wamwangi, S. Ziegler, C. Steimer, M. J. Kang, S. Y. Choi and M. Wuttig: Influence of Sn doping upon the phase change characteristics of Ge2Sb2Te5. In: Physica Status Solidi (a),(cover page). 201, 2004, p. 3087 - 3095 [phase change, optical storage, ultra-fast,doping ].

Ke Wang,C. Steimer,D. Wamwangi, S. Ziegler, M. Wuttig: Effect of Indium doping on Ge2Sb2Te5 thin films for phase change optical storage. In: Applied Physics A. 80, 2005, p. 1611 - 1616 [phase change, doping, chalcogenide, optical storage].

Ke Wang,C. Steimer, R. Detemple, D. Wamwangi and M. Wuttig: Assessment of Se based phase change alloy as a candidate for non-volatile electronic memory applications . In: Applied Physics A: Rapid communication. 81(8), 2005, p. 1601 - 1605 [phase change alloy, Selenide, non-volatile electronic memory].

Ke Wang,C. Steimer, M. Wuttig: Phase change properties of ternary AgSbSe2 chalcogenide films. In: Journal of Ovonic Research. 2, 2006, p. 61 - 66 [phase change properties, ternary alloy films, Selenide].

Qimin Wang, Kwang Ho Kim: Microstructural control of Cr–Si–N films by a hybrid arc ion plating and magnetron sputtering process . In: Acta Materialia. 57, 2009, p. 4974 - 4987 [Cr–Si–N; Nanocomposite; Physical vapor deposition; Nanocrystalline microstructure; Transmission electron microscopy ].

Takayuki Watanabe, Susanne Hoffmann-Eifert, Cheol Seong Hwang, and Rainer Waser. : Liquid Injection Atomic Layer Deposition of TiOx and Pb-Ti-O Films. In: Journal of Electrochemical Society. 153, 2006, p. F199 - F204 [ALD Ferroelectrics Memory 3D capacitors].

Takayuki Watanabe, Susanne Hoffmann-Eifert, Cheol Seong Hwang, and Rainer Waser. : Evaluation of Pb Precursors for Liquid Injection Atomic Layer Deposition of Pb(ZrxTi1-x)O3 Thin Films. In: Materials Research Society Symposium Proceedings 902E. (Ed. R. Ramesh, J.P. Maria, M. Alexe, V. Joshi) Warrendale, PA: Materials Research Society, 2006, p. 0902-T04-07.1 - 0902-T04-07.6 [ALD Precursor].

Takayuki Watanabe, Susanne Hoffmann-Eifert, Shaobo Mi, Chunlin Jia, Rainer Waser, and Cheol Seong Hwang.: Growth of Ternary PbTiOx Films in a Combination of Binary Oxide Atomic Layer Depositions . In: Journal of Applied Physics. 101, 2007, p. 014114-1 - 014114-8 [ALD Ferroelectrics FeRAM].

Takayuki Watanabe, Susanne Hoffmann-Eifert, Lin Yang, Andreas Ruediger, Carsten Kuegeler, Cheol Seong Hwang, and Rainer Waser. : Liquid Injection Atomic Layer Deposition of TiOx Films and the Resistive Switching Behavior . In: Journal of Electrochemical Society . 154, 2007, p. G134 - G140 [ALD FeRAM 3D Capacitor Precursor].

Gang Wei, Jörg Reichert, and Klaus D. Jandt *: Controlled self-assembly and templated metallization of fibrinogen nanofibrils. In: Chemical Communications. 2008, p. 3903 - 3905 [self-assembly, protein, fibrils, metallization].

Yin-Tao Wei Nasdala L, Rothert H & Xie Z. : Study on the dynamic mechanical properties of aged rubbers. In: Proceedings of the Third European Conference on Constitutive Models for Rubber. (Ed. Busfield J & Muhr A.) London, UK, 2003, p. 71 - 77 [rubber, dynamic test, aging, damage].

Nasdala, Lutz Wei, Yintao Rothert, Heinrich: Homogenisation techniques for the analysis of oxygen diffusion and reaction in fiber-reinforced elastomers. In: Proceedings of the Third European Conference on Constitutive Models for Rubber. (Ed. Busfield J & Muhr A.) London, UK, 2003, p. 85 - 91 [Homogenisation techniques, oxygen diffusion, fiber-reinforced elastomers].

Zhimin Xie Xingwen Du Yintao Wei : A micro-mechanical mechanism for energy dissipation of filled rubber. In: Proceedings of the Third European Conference on Constitutive Models for Rubber. (Ed. Busfield J & Muhr A.) London, UK, 2003, p. 387 - 390 [elastomers, aging, TEM].

Jinsong Wu, C. L. Jia, K. Urban: Stair-rod dislocations in perovskite films on LaAIO3 substrates . In: Philosophical Magazine Letters. 81 No. 6, 2001, p. 375 - 383.

Jinsong Wu, C. L. Jia, K. Urban, J. H. Hao, X. X. Xi: Conservative antiphase boundary in SrTiO3 films on LaAIO3 substrates with SrRuO3 buffer layers. In: Journal of Applied Physics. 89 No. 10, 2001, p. 5653 - 5656.

Jinsong Wu, C. LO. Jia, K. Urban, J. H. Hao, X. X. Xi: Misfit relaxation in SrTiO3/SrRuO3 bilayer films on LaAlO3(100) substrates. In: Microsc. Microanal.. 7, 2001, p. 1222 - 1223.

Jinsong Wu, C. L. Jia, K. Urban, J. H. Hao, X. X. Xi: Propagation and interaction of {111} planar defects in the SrRuO3 buffer layer in SrTiO3/SrRuO3 two-layer films on LaAlO3 substrates. In: Philosophical Magazine A. 82 No. 1, 2002, p. 65 - 80.

Jinsong Wu, C. L. Jia, K. Urban, J. H. Hao, X. X. Xi: A new mechanism for misfit dislocation generation: superdislocations associated with Ruddlesden-Popper planar defects. In: Journal of Crystal Growth. 234, 2002, p. 603 - 609 [High resolution electron microscopy (HRTEM); Interface structure; Misfit dislocation source; Partial dislocation; Ruddleson-Popper defect; Perovskites].

. 2000.

H. Xie, S. Kishimoto et al.: In-plane deformation measurement using atomic force microscope Moiré method. In: J. Nanotechnology. 11, 2000, p. 24 - 29.

Huimin Xie, Bing Zhao, Fulong, Dai: Experimental Study on Nanomoire Method (chinesisch). In: Optical Technique. 26 No. 3, 2000, p. 193 - 195.

Huimin Xie, A. Asundi, Oh Kim Eng., Chai Gin Boay: Acvanced Moire Methods. In: Asian Journal of Physics. 10, 2001, p. 195 - 204.

Huimin Xie, Dai Fulong, S. Kishimoto, Zhang Wei : Fabrication of the Micro/Sub-micron Moire Gratings Using Electron Beam Lithography Method. In: Journal of Optical Technique. 26, 6, 2000, p. 526 - 528.

Huimin Xie, Satoshi Kishimoto, Norio Shinya: Fabrication of High Frequency Electron Beam Moire Grating Using Multi-deposited Layer Techniques. In: Journal of Optics and Laser Technology. 32 No. 5, 2000, p. 361 - 367.

Huimin Xie, Satoshi Kishimoto, Norio Shinya: Electron Moire Method and its Application to Micro-Deformation Measurement. In: Journal of Optics and Lasers in Engineering. 34,1, 2000, p. 1 - 14.

Huimin Xie, Bing Zhao, Anand Asundi: An Optical Strain Senso Using Median Density Graiting Foil - Rivaling with Electric Strain Gauge. In: Journal of Review of Scientific Instruments. 72 No. 2, 2001, p. 1554 - 1558.

Huimin Xie, Liu Tong, Lu Yunguang, Yu Jing, Dai Fulong, Zhang Wei: A Study on the Phase Shifting Technique for the AFM Scanning Moire Method. In: Optical Technique. 127 No. 3, 2001, p. 193 - 195.

Huimin Xie, Bing Zhao, JianMin Miao, Anaud Asundi: Modeling of Grating/Moire Based Micro Motion Sensor. In: Micro-system Technologies. 7 No. 3, 2001, p. 107 - 116.

Huimin Xie, Y. G. Lu, Z. W. Zhong, J. Yu, B. K. A. Ngoi, G. B. Chai, A. Asundi: Thermal-Deformation Measurement of Electronic Packages Using Atomic Force Microscope Scanning Moire Technique. In: Journal of Review of Scientific Instruments. 72 No. 4, 2001, p. 2180 - 2185.

Huimin Xie, Chai Gin Boay, Tong Liu, Yunguan Lu, Jin Yu, Anand Asundi: Phase-Shifting Morie Method with an Atomic Force Microscope. In: Applied Optics-OT. 40 (34), 2001, p. 6193 - 6198.

Huimin Xie, T. H. Hyde, Wei Sun, Fulong Dai, Daqing Zou: High Temperature Gratings and Their Application to Deformation Measurement. In: A Review, Strain. 37, 2001, p. 59 - 66.

W. Xu, K.B. Kim, J. Das, M. Calin and J. Eckert: Phase stability and its effect on the deformation behavior of Ti-Nb-Ta-In/Cr beta alloys. In: Scripta Materialia. 54, 2006, p. 1943 - 1948 [Beta-titanium alloys, Plastic deformation, Phase stability, Martensitic transformation].

K.B. Kim, S. Yi, H. Choi-Yim, J. Das, W. Xu, W. L. Johnson and J. Eckert: Effect of Cu on local amorphization in bulk Ni-Ti-Zr-Si alloys during solidification. In: Acta Materialia. 54, 2006, p. 3141 - 3150 [Solidification microstructure, Amorphous, Interfaces, Transmission electron microscopy].

P. Yu, K. B. Kim, J. Das, F. Baier, W. Xu and J. Eckert: Al-based metal matrix composite reinforced by Ni-Nb metallic glass particles and its mechanical properties. In: Scripta Materialia. 54, 2006, p. 1445 - 1450 [Ni¿Nb metallic glass, Al-based metal matrix composite, Powder metallurgy].

W. Xu, K. B. Kim, J. Das, M. Calin, B. Rellinghaus and J. Eckert: Deformation-induced nanostructuring in a Ti-Nb-Ta-In beta alloy. In: Applied Physics Letters. 89, 2006, p. 031906 - (3 pages) [Beta-titanium alloys, deformation-induced nanostructuring, plastic deformation, martensitic transformation, phase stability].

Hu Yang, Dimitrios Lazos, Mathias Ulbricht, : Thin, Highly Crosslinked Polymer Layer Synthesized via Photoinitiated Graft Copolymerization on a Self-Assembled-Monolayer-Coated Gold Surface. In: J. Appl. Polym. Sci.. 97, 2005, p. 158 - 164 [membrane, surface modification,].

SY Shan, Jian-Feng Yang, JQ Gao, WH Zhang, ZH Jin, R Janssen, T Ohji : Porous silicon nitride ceramics prepared by reduction-nitridation of silica. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY. 88, 2005, p. 2594 - 2596 [THERMAL-SHOCK RESISTANCE; MICROSTRUCTURE; ALUMINA; FABRICATION; POROSITY; STRENGTH; SI3N4].

Jian-Feng Yang, SY Shan, R Janssen, G Schneider, T Ohji, S Kanzaki: Title: Synthesis of fibrous beta-Si3N4 structured porous ceramics using carbothermal nitridation of silica. In: ACTA MATERIALIA . 53 , 2005, p. 2981 - 2990 [HIGH-STRENGTH; MECHANICAL-PROPERTIES; MICROSTRUCTURE; SI3N4; FABRICATION; COMPOSITE; POROSITY; POWDERS; AL2O3 ].

Zeng YP, Jian-Feng Yang, Kondo N, Ohji T, Kita H, Kanzaki S : Fracture energies of tape-cast silicon nitride with beta-Si3N4 seed addition. In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY. 88, 2005, p. 1622 - 1624 [MICROSTRUCTURAL DESIGN; SI3N4 CERAMICS; TOUGHNESS; PRESSURE].

M. Eggersmann, Feng Ye, S. Herth, O. Gutfleisch, R. Wuerschum: Integranular melting of ultrafine grained Nd2Fe14B studied by means of radiotracer diffusion. In: Interface Science. 9, 3-4, 2001, p. 337 - 341.

Wai-Leung Yim, Tobias Nowitzki, Mandus Necke, Hanno Schnars, Patricia Nickut, Jürgen Biener, Monika M. Biener, Volkmar Zielasek, Katharina Al-Shamery, Thorsten Klüner, Marcus Bäumer: Universal Phenomena of CO Adsorption on Gold Surfaces with Low-coordinated Sites. In: J. Phys. Chem. C. 111, 2007, p. 445 - 451.

Susanne Gollerthan, Marcus L. Young, Klaus Neuking, Gunther Eggeler: Direct Physical Evidence for the Back Transformation of Stress-induced Martensite in the Vicinity of Cracks in Pseudoelastic NiTi Shape Memory Alloys. In: Acta Materialia. 57, 2009, p. 5892 - 5897 [NiTi, Phase transformation, Metal, Shape memory Alloys, Mechanical deformation].

Susanne Gollerthan, Marcus L. Young, Alberto Baruj, Jan Frenzel, Wolfgang Schmahl, Gunther Eggeler: : Fracture Mechanics and Microstructure in NiTi Shape Memory Alloys. In: Acta Materialia. 57, 2009, p. 1015 - 1025 [NiTi, Phase transformation, Metal, Shape memory Alloys, Mechanical deformation].

P. Yu, S. Venkataraman, J. Das, L. C. Zhang, W. Y. Zhang and J. Eckert: The effect of high pressure during the fabrecation on the thermal and mehcancial properties on amorphous Ni60Nb40 particle-reinforced Al-based metal matrix composites. In: Journal of materials research. 22, 2007, p. 1168 - 1173 [metal matrix composite, metallic glass].

P. Yu, L. C. Zhang, J. Das, K. B. Kim and J. Eckert: Interfacial reaction during the fabrication of Ni60Nb40 metallic glass particle-reinforced Al-based MMCs. In: Materials Science and Engineering A. 444, 2007, p. 206 - 213 [metal matrix composite, metallic glass].

Georgi Zachariev, Hans-Volker Rudolph, Heinz Ivers: Glasfaserverstärktes Polyoximethylen -Versagensprognose durch mechanische und zerstörungsfreie Charakterisierung. In: Materialprüfung. 43, 2001, p. 236 - 241.

G. Zhang, V. Buck: Influence of geometry factors of in situ dc glow discharge on the diamond nucleation in a hot-filament chemical vapor deposition system. In: Surface and Coating Technology. 132, 2000, p. 256 - 261.

Gui-feng Zhang, Volker Buck: Diamond Films Synthesized at Ultralow Filament Temperatures. In: Advanced engineering Materials. 4 (3), 2002, p. 131.

Gui-feng Zhang, V. Buck: A Simple method to Grow Textured (111) Diamond Thin Films in a Hot-filament CVD System. In: Applied Surface science. 207, 2003, p. 121.

Gui-feng Zhang, V. Buck: Lower Filament Temperature Limit of Diamond Growth in a Hot-filament CVD System. In: Surface and Coatings Tecnology. 160, 2002, p. 14.

Gui-feng Zhang, S. Reuter, V. Buck: Deposition of hard carbon coatings using combined inductively and capacitively coupled plasma sources. In: Surface and Coatings Technology. 190, 2005, p. 54.

Gui-feng Zhang,V. Buck: Diamond films synthesized by pulsed laser assisted hot-filament CVD at 0.2 mbar pressure. In: Advanced Engineering Materials. 3, 2001, p. 81 - 83 [diamond films, low-pressure,pulsed laser assisted HFCVD].

Gui-feng Zhang,V. Buck: Rapid nucleation of diamond films by pulsed laser chemical vapor deposition. In: Applied Surface Science. 180, 2001, p. 255 - 260 [diamond films, nucleation].

Haibin Zhang，Xin Wang, Klaus G Nickel, Yanchun Zhou: Experimental and thermodynamic study of the hydrothermal oxidation behavior of Ti3SiC2 powders. In: Scripta Materialia. 59, 2008, p. 746 - 749 [hydrothermal oxidation].

Haibin Zhang, Xin Wang, C Berthold, Klaus G Nickel, Yanchun Zhou: Effect of Al dopant on the hydrothermal oxidation behavior of Ti3SiC2 powders. In: Journal of the European Ceramic Society. 29, 2009, p. 2097 - 2103 [Hydrothermal oxidation].

Haibin Zhang，Xiang Wu, Klaus G Nickel, Jixin Chen, Volker Presser : High-pressure powder x-ray diffraction experiments and ab initio calculation of Ti3AlC2. In: Journal of Applied Physics. 106, 2009, p. 013519 [High pressure, Diamond Anvil Cell].

Haibin Zhang, Volker Presser, Christoph Berthold, Klaus G Nickel, Xin Wang, Christoph Raisch, Thomas Chasse, Lingfeng He, Yanchun Zhou: Mechanisms and kinetics of the hydrothermal oxidation of bulk titanim silicon carbide. In: Journal of the American Ceramic Society. in press, 2010, [hydrothermal oxidation].

Lai-Chang Zhang, Jian Xu, Jürgen Eckert: Thermal stability and crystallization kinetics of mechanically alloyed TiC/Ti-based metallic glass matrix composite. In: Journal of Applied Physics. 100, 2006, p. 033514 - 033514 [Crystallization, Composite, Thermal stability, Titanium].

W.Y. Zhang, C.H. Chiu, L.C. Zhang, K. Biswas, H. Ehrenberg, W.C. Chang, J. Eckert: Complete suppression of metastable phase and significant enhancement of magnetic properties of B-rich PrFeB nanocomposites prepared by devitrifying amorphous ribbons. In: Journal of Magnetism and Magnetic Materials. 308, 2007, p. 24 - 27 [Metastable phase; Amorphous; Anneal; Magnetic properties].

P. Yu, L.C. Zhang, W.Y. Zhang, J. Das, K.B. Kim and J. Eckert: Interfacial reaction during the fabrication of Ni60Nb40 metallic glass particles-reinforced Al based MMCs. In: Materials Science and Engineering: A. 444, 2007, p. 206 - 213 [Ni-Nb metallic glass, Al-based metal matrix composite, Interfacial reaction].

L.C. Zhang, K.B. Kim, P. Yu, W.Y. Zhang, U. Kunz and J. Eckert: Amorphization in mechanically alloyed (Ti, Zr, Nb)-(Cu, Ni)-Al equiatomic alloys. In: Journal of Alloys and Compounds. 428, 2007, p. 157 - 163 [Amorphous; Equiatomic; Mechanical alloying; Thermal stability].

Peng Yu, Shankar Venkataraman, Jayanta Das, Lai-Chang Zhang, Wenyong Zhang, Jürgen Eckert: Effect of high pressure during the fabrication on the thermal and mechanical properties of amorphous Ni60Nb40 particle-reinforced Al-based metal matrix composites. In: Journal of Materials Research. 22, 2007, p. 1168 - 1173 [Al-based metal matrix composites, mechanical properties, powder consolidation, thermal stability].

L.C. Zhang, M. Calin, M. Branzei, L. Schultz, J. Eckert: Phase stability and consolidation of glassy/nanostructured Al85Ni9Nd4Co2 alloys. In: Journal of Materials Research. 22, 2007, p. 1145 - 1155 [amorphous, nanostructured, powder consolidation, Al, phase stability].

L.C. Zhang, J. Das, H.B. Lu, C. Duhamel, M. Calin, J. Eckert: High strength Ti¿Fe¿Sn ultrafine composites with large plasticity. In: Scripta Materialia. 57, 2007, p. 101 - 104 [Titanium, composite, ultrafine, mechanical properties, casting].

Lai-Chang Zhang, Mariana Calin, Flora Paturaud, Christine Mickel, Jürgen Eckert: Deformation-induced nanoscale high-temperature phase separation in Co-Fe alloys at room temperature. In: Applied Physics Letters. 90, 2007, p. 201908-1 - 201908-3 [Plastic deformation, phase transformation, bimodal ].

L.C. Zhang, M. Calin, F. Paturaud, J. Eckert: Deformation behavior and plastic instability of off-stoichiometric Co-Fe alloys. In: Scripta Materialia. 57, 2007, p. 731 - 734 [Mechanical properties; Deformation behavior; Plastic instability; Casting].

Lai-Chang Zhang, Hai-Bo Lu, Christine Mickel, Jürgen Eckert: Ductile ultrafine-grained Ti-based alloys with high yield strength. In: Applied Physics Letters. 91, 2007, p. 051906-1 - 051906-3 [Titanium, Ultrafine-grained, Mechancial properties, Composite, Casting].

F. Stein, Lichun Zhang, G. Sauthoff and M. Palm: "TEM and DTA Study of the Stability of Al5Ti3 and h-Al2Ti Superstructures in Al-Rich TiAl Alloys". In: Acta Mater.. 49, 2001, p. 2919 - 2932 [Al-Ti, TEM, DTA].

M. Palm, Lichun Zhang, F. Stein and G. Sauthoff: "Phases and phase equilibria in the Al-rich part of the Al-Ti system above 900 C". In: Intermetallics. 10, 2002, p. 523 - 540 [Al-Ti, phase diagram].

Lichun Zhang, M. Palm, F. Stein and G. Sauthoff: "Microstructural modification in a Al-rich -TiAl-based alloy during annealing". In: Intermetallics. 9, 2001, p. 229 - 238 [Al-rich TiAl, TEM].

Zhang, R. F., Veprek, S. : Metastable phases and spinodal decomposition in Ti1-xAlxN system studied by ab initio and thermodynamic modeling, a comparison with the TiN¿Si3N4 system. In: Materials Science and Engineering A . 448, 2007, p. 111 [spinodal decomposition, Ti-Al-N, ab initio, DFT, thermodynamics ].

Zhang, R. F., Sheng, S. H. and Veprek, S. : Mechanical strengths of silicon nitrides studied by ab initio calculations. In: Appl. Phys. Lett. 90, 191903.. 90, 2007, p. 191903 [Ideal strength, elastic constant, Si3N4, fcc-SiN, ab initio].

Zhang, R. F., and Veprek, S. : Phase stabilities and spinodal decomposition in Cr1-xAlxN system studied by ab initio LDA and thermodynamic modeling: Comparison with Ti1-xAlxN and TiN/Si3N4 System. In: Acta Materialia . 55, 2007, p. 4615 [Phase stabilities, spinodal, ab initio, Cr-Al-N].

Zhang, R. F., Sheng, S. H. and Veprek, S. : First principles studies of ideal strength and bonding nature of AlN polymorphs in comparison to TiN,. In: Appl. Phys. Lett. . 91, 2007, p. 031906 [ideal strength, bonding nature, bulk moulus, AlN, TiN].

Zhang, R. F., Sheng, S. H. and Veprek, S.: Mechanism of the B3 to B1 transformation in cubic AlN under uniaxial stress, Physical Review B. In: Physical Review B. 76, 2007, p. 075208 [zincblend-AlN, rocksalt-AlN, phase transformation, uniaxial stress, stress-strain relation].

Zhang, R. F., Sheng, S. H. and Liu, B. X. : Predicting the formation enthalpies of binary intermetallic compounds. In: Chemical Physics Letter. 442, 2007, p. 511 - 514 [Miedema's theory, formation enthalpy, intermetallic compounds].

Veprek S., Veprek-Heijman M. G. J. and Zhang, R. F. : Chemistry, physics and fracture mechanics in search for superhard materials, and the origin of superhardness in nc-TiN/a-Si3N4 and related nanocomposites. In: J. Phys. Chem. Solids. 68, 2007, p. 1161 - 1168 [superhard materials, nc-TiN/a-Si3N4, nanocomposite ].

R. F. Zhang, S. Veprek, and A. S. Argon : Mechanical and electronic properties of hard rhenium diboride of low elastic compressibility studied by first-principles calculation. In: Applied Physics Letters. 91, 2007, p. 201914 [Ideal strength, elastic constant, First principles, ReB2, Charge density ].

Shan-Tao Zhang, Alain Brice Kounga, Emil Aulbach,Helmut Ehrenberg,Jürgen Rödel: Giant strain in lead-free piezoceramics Bi0.5Na0.5TiO3¿BaTiO3¿K0.5Na0.5NbO3 system. In: Appl.Phys.Lett.. 91, 2007, p. 112906 [lead free, piezoceramics, strain].

Shan-Tao Zhang,Alain Brice Kounga, Emil Aulbach, Torsten Granzow, Wook Jo,Hans-Joachim Kleebe,Jürgen Rödel : Lead-free piezoelectrics with giant strain in the system Bi0.5Na0.5TiO3-BaTiO3-K0.5Na0.5NbO3. Part I: structure and room temperature properties. In: journal of applied physics. 103, 2008, p. 034107-1 - 034107-8 [lead free, piezoceramics].

Shan-Tao Zhang,Alain Brice Kounga,Emil Aulbach,Wook Jo,Torsten Granzow,Helmut Ehrenberg,and Jürgen Rödel: Lead-free piezoceramics with giant strain in the system Bi0.5Na0.5TiO3¿BaTiO3¿K0.5Na0.5NbO3. II. Temperature dependent properties. In: journal of applied physics. 103, 2008, p. 034108-1 - 034108-7 [lead free, piezoceramics].

Tierui Zhang, Christian Spitz, Markus Antonietti, Charl F. J. Faul, : Highly Photoluminescent Polyoxometaloeuropate-Surfactant Complexes by Ionic Self-Assembly. In: Chemistry - A European Journal. 11, 2005, p. 1001 - 1009 [ionic self-assembly, liquid crystals, photoluminescence, polyoxometalates, surfactants].

W.-J. Zhang, U. Lorenz, F. Appel: Recovery, recrystallization and phase transformations during thermochemical processing and treatment of TiAl-based alloys. In: Acta mater.. 48, 2000, p. 2803 - 2813.

Yong Zhang, Ivan S. Baturin,Emil Aulbach,Doru C. Lupascu,Andrei L. Kholkin,Vladimir Ya. Shur,and Jürgen Rödel: Evolution of bias field and offset piezoelectric coefficient in bulk lead zirconate titanate with fatigue . In: Applied Physics letter. 86, 2005, p. 012910-1 - 012910-3 [piezoelectric coefficient,fatigue, lead zirconate titanate ceramics,switchable polarization,switching].

Yong Zhang, Doru C. Lupascu,Emil Aulbach, Ivan Baturin, Andrew Bell, Jurgen Roedel: Heterogeneity of fatigue in bulk lead zirconate titanate. In: Acta Materialia. 53, 2005, p. 2203 - 2213 [Dielectrics, Ferroelectrics,Functional ceramics].

Longjie Zhou, Doru C.Lupascu, Andre Zimmermann,Yong Zhang: Discontinuous switching in antiferroelectric ceramics monitored by acoustic emissions. In: Journal of Applied Physics. 97, 2005, p. 124106-1 - 124106-8 [antiferroelectrics, Acoustic Emission, domain Switching,].

Yong Zhang,Doru C.Lupascu, Nina Balke, Jurgen Rödel: Near electrode fatigue in lead zirconate titanate ceramics. In: J. Phys. IV France . 128, 2005, p. 97 - 103 [ferroelectrics,fatigue, electrode materials,].

Zhe-Feng Zhang, Z. G. Wang,: Fatigue Cracking Characteristics of a Copper Bicrystal When Slip Bands Transfer through the Grain Boundary. In: Mater. Sci. Eng. A. 343, 2003, p. 308 - 313.

Zhe-Feng Zhang, Z. G. Wang: Comparison of Fatigue Lives between Grain Boundaries and Component Single Crystals of Copper Bicrystals. In: Z. Metall. 93, 2002, p. 1188 - 1193.

Zhe-Feng Zhang, and Zhong-Guang Wang: Dependence of Intergranular Fatigue Cracking on the Interactions of Persistent Slip Bands with Grain Boundaries. In: Acta Mater., . 51, 2003, p. 347 - 364 [Copper bicrystals; Grain boundaries (GBs); Fatigue cracking; Persistent slip bands (PSBs).].

Zhe-Feng Zhang J. Eckert L. Schultz: Tensile and Fatigue Fracture Mechanisms of A Zr-Based Bulk Metallic Glass. In: J. Mater. Res.,. 18, 2003, p. 456 - 465 [Bulk Metallic Glasses, Fatigue, Fracture, Shear bands].

Zhonghua Zhang, J. Frenzel, C. Somsen, J. Pesicka, K Neuking, G. Eggeler.: On the formation of TiC crystals during processing of NiTi shape memory alloys. In: Trends in Crystal Growth Research. (Ed. G.V. Karas) New York: Nova Science Publishers, 2005.

Zhonghua Zhang, J. Frenzel, K. Neuking, G.Eggeler : On the Reaction between NiTi Melts and Crucible Graphite during Vacuum Induction Melting of NiTi Shape Memory Alloys. In: Acta Mater. . 53, 2005, p. 3971 - 3985 [NiTi shape memory alloys, VIM graphite crucible processing, growth of TiC layer, enrichment of carbon in NiTi melts].

Zhonghua Zhang, Yan Wang, Xiufang Bian, Weimin Wang: Orientation of nanocrystals in rapidly solidified Al¿based alloys and its correlation to the compound-forming tendency of alloys. In: Journal of Crystal Growth. 281, 2005, p. 646 - 653 [nanocrystals, melt spinning, Al-based alloys, compound-forming tendency].

Jan Frenzel, Zhonghua Zhang, Klaus Neuking, Gunther Eggeler: High quality vacuum induction melting of small quantities of NiTi shape memory alloys in graphite crucibles. In: Journal of Alloys and Compounds. 385, 2004, p. 214 - 223 [NiTi shape memory alloys, melting, graphite crucibles, interdiffusion, TiC layer].

Yan Wang, Zhonghua Zhang, Shaohua Zheng, Weimin Wang, Xiufang Bian: Effect of Sr addition on the microstructure of a rapidly solidified Al-wt.%Sr alloy. In: Prakt. Metallogr.. 42, 2005, p. 411 - 422.

Jan Frenzel, Zhonghua Zhang, Klaus Neuking, Gunther Eggeler: Die Verwendung verschiedener Feuerfestmaterialien bei der Schmelzmetallurgischen Herstellung von NiTi-Formgedaechtnislegierungen. In: Fortschritte in der Metallographie(Prakt. Met. Sonderband 36 . (Ed. Michael Pohl) Frankfurt: Werkstoff-Informationsgesellschaft mbH, 2004, p. 511 - 516.

Jan Frenzel, Zhonghua Zhang, Ch. Somsen, Klaus Neuking, Gunther Eggeler: Metallkundliche Untersuchungen zu den Strukturbildungs-Prozessen bei der schmelzmetallurgischen Herstellung von NiTi-Formgedaechtnislegierungen. In: Fortschritte in der Metallographie (Prakt.Met. Sonderband 37). (Ed. Mathias Goeken) Frankfurt: Werkstoff-Informationsgesellschaft mbH, 2005, p. 201 - 206.

Zhonghua Zhang, J. Frenzel, K. Neuking, G. Eggeler: Vacuum induction melting of ternary NiTiX (X = Cu, Fe, Hf, Zr) shape memory alloys using graphite crucibles. In: Mater. Trans. JIM. 47, 2006, p. 661 - 669 [shape memory alloys, vacuum induction melting, scanning electron microscopy, differential scanning calorimetry].

Yan Wang, Zhonghua Zhang, Haoran Geng, Zhongxi Yang: Formation of the icosahedral quasicrystalline phase in a rapidly solidified Al52Ce25.5Fe12.5Si10 alloy. In: Materials Characterization. 56, 2006, p. 200 - 207 [Al-Cu-Fe-(Si) alloys, quasicrystalline phase, rapid solidification, DTA, TEM].

Zhonghua Zhang, Jan Frenzel, Christoph Somsen, Josef Pesicka, Klaus Neuking, Gunther Eggeler: Orientation relationship between TiC carbides and B2 phase in as-cast and heat-treated NiTi shape memory alloys. In: Materials Science and Engineering A. 438-440, 2006, p. 879 - 882 [NiTi shape memory alloys; TiC; TEM; Orientation relationship].

Hongxing Zheng, Jiancun Rao, Janine Pfetzing, Jan Frenzel, Christoph Somsen, Gunther Eggeler: TEM observation of stress induced martensite after nanoindentation of pseudoelastic Ti50Ni48Fe2. In: Scripta Materialia. 58, 2008, p. 743 - 746 [Nanoindentation, Transmission Electron Microscopy (TEM), Pseudoelastic Shape Memory Alloys, Stress Induced Martensite, Dislocation Plasticity.].

M. Zheng, U. Lauschke, M. Kuna: Ductility dissipation based approach for predicting crack initiation. In: Annual Sci. Conf. of Applied Math. & Mech., Göttingen. 2000.

Maosheng Zheng, G. Zhou, D.A. Zacharopoulos, M. Kuna: Crack initiation behavior in StE690 Steel characterized by strain energy density criterion. In: Theoretical and Applied Fracture Mechanics. 36, 2001, p. 141 - 145.

Maosheng Zheng, U. Lauschke, M. Kuna: A damage mechanics based approach for fracture of metallic components. In: Computational Materials Science. 19, 2000, p. 170 - 178 [Damage; Crack initiation; Stretched zone; Material element; Deformation ability; Dissipation].

Maosheng Zheng, Suyitno, L. Katgerman: On Transport Phenomena And Hot Tearing Criteria In DC Casting Of Aluminium Alloys. In: Proceedings of the 22nd Riso International Symposium on Materials Science. 2001, p. 455 - 460.

Changzheng Xu, Qingjuan Wang, Maosheng Zheng, Jindou Li, Meiquan Huang: Fatigue behavior and damage characteristic of ultra-fine grain low-purity copper processed by equal-channel angular pressing (ECAP). In: Materials Science and Engineering: A . 475, 2008, p. 249 - 256 [Fatigue, damage, ultra-fine grain copper, ECAP ].

Hongxiang Chen, Maosheng Zheng, Hongying Sun, Qingming Jia : Characterization and properties of sepiolite/polyurethane nanocomposites . In: Materials Science and Engineering: A,. 445-446, 2007, p. 725 - 730 [Characterization, property sepiolite / polyurethane nanocomposites ].

Guanfa Lin, Genshu Zhou, Dangguo Li, Maosheng Zheng: Effect of Cerium on Gas Evolution Behavior of Pb-Ca-Sn Alloy . In: Journal of Rare Earths. 24(2), 2006, p. 232 - 237 [Effect, Cerium, Gas Evolution, Pb-Ca-Sn Alloy ].

Q.J. Wang, C.Z. Xu, M.S. Zheng, J.W. Zhu, Z.Z. Du : Fatigue crack initiation life prediction of ultra-fine grain chromium¿bronze prepared by equal-channel angular pressing . In: Materials Science and Engineering: A, . 496, 2008, p. 434 - 438 [Fatigue crack initiation, ultra-fine grain chromium¿bronze, ECAP ].

Y.N. Zhang, J.L. Zi, M.S. Zheng, J.W. Zhu: Corrosion behavior of copper with minor alloying addition in chloride solution . In: Journal of Alloys and Compounds . 462, 2008, p. 240 - 243 [Corrosion, copper alloy, chloride solution ].

G. Li, Y.R. Feng, Z.Q. Bai, J.W. Zhu, M.S. Zheng : Photo-electrochemical analysis of passive film formed on X80 pipeline steel in bicarbonate/carbonate buffer solution . In: Applied Surface Science. 254, 2008, p. 2837 - 2843 [Photo-electrochemical analysis, passive film, X80, pipeline steel, bicarbonate/carbonate buffer solution ].

D.G. Li, Y.R. Feng, Z.Q. Bai, M.S. Zheng: Characteristics of CO2 corrosion scale formed on N80 steel in stratum water with saturated CO2. In: Applied Surface Science . 253, 2007, p. 8371 - 8376 [corrosion scale, N80 steel, stratum water, CO2].

C.Z. Xu, Q.J. Wang, M.S. Zheng, J.W. Zhu, J.D. Li, M.Q. Huang, Q.M. Jia, Z.Z. Du: Microstructure and properties of ultra-fine grain Cu¿Cr alloy prepared by equal-channel angular pressing. In: Materials Science and Engineering: A . 459, 2007, p. 303 - 308 [Microstructure, ultra-fine grain, Cu¿Cr alloy, ECAP].

Q.M. Jia, M. Zheng, Y.C. Zhu, J.B. Li, C.Z. Xu: Effects of organophilic montmorillonite on hydrogen bonding, free volume and glass transition temperature of epoxy resin/polyurethane interpenetrating polymer networks . In: European Polymer Journal. 43, 2007, p. 35 - 42 [organophilic montmorillonite, hydrogen bonding, free volume, glass transition temperature, epoxy resin/polyurethane interpenetrating polymer networks ].

J.H. Luo, M. Zheng, X.W. Zhao, C.Y. Huo, L. Yang: Simplified expression for estimating release rate of hazardous gas from a hole on high-pressure pipelines . In: Journal of Loss Prevention in the Process Industries. 19, 2006, p. 362 - 366 [release rate, hazardous gas, hole, high-pressure pipelines ].

S.G. Jia, M.S. Zheng, P. Liu, F.Z. Ren, B.H. Tian, G.S. Zhou, H.F. Lo: Aging properties studies in a Cu¿Ag¿Cr Alloy . In: Materials Science and Engineering: A. 419, 2006, p. 8 - 11 [Aging, Cu¿Ag¿Cr Alloy ].

M. Zheng, J.H. Luo, X.W. Zhao, Z.Q. Bai, R. Wang: Effect of pre-deformation on the fatigue crack initiation life of X60 pipeline steel. In: International Journal of Pressure Vessels and Piping. 82, 2005, p. 546- - 552 [pre-deformation, fatigue crack initiation, X60, pipeline steel].

M. Zheng, J. H. Luo, X. W. Zhao, G. Zhou, H. L. Li: Modified expression for estimating the limit bending moment of local corroded pipeline . In: International Journal of Pressure Vessels and Piping. 81, 2004, p. 725 - 729 [limit bending moment, local corroded pipeline ].

Junjie Yuan, Shuxue Zhou, Limin Wu: Encapsulation of Organic Pigment Particles Coated with silica via Sol-gel Process. In: Journal of Sol-Gel Science and Technology. 36, 2005, p. 265 - 274 [organic pigment,titania,sol-gel].

Y. Zhu, A. Morgante et al.: Coadsorption of Cs with O and CO on Ru(0001): relation between structural and electronic properties. In: Progress in Surface Sci.. 64, 2000, p. 211 - 223.

Y.D. Kim, Y.J. Zhu et al.: Comparison of the electronic structure and surface geometry of the metastable Cs+O overlayers on Ru(0001). In: Phys. Rev. B. 61, 2000, p. 8455 - 8461.

Yingjie Zhu, A. Morgante, A. P. Seitsonen, S. Wendt, Y. D. Kim, S. Schwegmann, H. Bludau, H. Over: Coadsorption of Cs with O and CO on Ru(0001): relation between structural and electronic properties. In: Progress in Surface Science. 64, 2000, p. 211 - 223.

Yingjie Zhu, Ari P. Seitsonen, Kolja Bedrüftig, Herbert Over: Bonding Mechanism and Atomic Geometry of an Ordered Hydroxyl Overlayer on Pt(111). In: J. Am. Chem. Soc.. 123, 2001, p. 7347 - 7351.

Pawel Zieba: Local Characterization of the Chemistry and Kinetics in Discontinuous Solid State Reactions . Cracow: Orecop Ltd., 2001, 110 pp. [Analytical electron microscopy, Solute concentration profiles, Grain boundary diffusion, Discontinuous reactions].

Pawel Zieba, Wolfgang Gust: On the Activation Energy of the Diffusion Process at Migrating Grain Boundaries. In: Interface Science . 10, 2002, p. 27 - 30 [Grain boundary diffusion, Discontinuous precipitation, Analytical electron microscopy, Grain boundary movement].

G.A. Lopez, S. Sommadossi S., W. Gust, E.J. Mittemeijer, P. Zieba : Phase Characterization of Diffusion Soldered Ni/Al/Ni Interconnections. In: Interface Science . 10, 2002, p. 13 - 19 [Diffusion soldering, Isothermal solidification, Ni-Al system, Intermetallic phases, Interface reactions].

D. Bradai, P. Zieba, E. Bischoff, W. Gust : A New Mode of the Discontinuous Dissolution Reaction in Mg-10 wt.% Al Alloy. In: Materials Chemistry and Physics. 72, 2001, p. 401 - 404 [Mg-Al alloys, Discontinuous precipitation, Discontinuous dissolution, Grain boundary migration].

Pawel Zieba: Diffusion Soldering-Candidate for a Lead-free Interconnection Technology. In: In¿ynieria Materia³owa. XXII, 2001, p. 989 - 992 [Diffusion soldering, Lead-free soldering].

Pawel Zieba, Wolfgang Gust : Local Characterization of the Diffusion Process during Discontinuous Precipitation: A Review. In: Z. Metallkunde (special issue dedicated to Professor G. Petzow). 92, 2001, p. 645 - 654 [Discontinuous reactions, Grain boundary diffusion, Analytical electron microscopy].

P. Zieba, A. Pawlowski, W. Gust : The Role of Grain Boundary Diffusion in Discontinuous Reactions. In: Defect and Diffusion Forum. 194-199, 2001, p. 1759 - 1766 [Discontinuous precipitation, EDX microanalysis, Grain boundary diffusion, Grain boundary movement, Solute concentration profiles].

P. Zieba, W. Gust : Growth of Lamellar Products During Discontinuous Solid State Reactions (Invited lecture). In: Materials Research Society Symposium Proceedings Series (Proc. MRS 1999 Fall Meeting, Symposium E: Nucleation and Growth Processes in Materials). 580, 2000, p. 45 - 56 [Discontinuous solid state reactions, Analytical electron microscopy, Lamellar structures, In situ studies, ].

Pawel Zieba, Wolfgang Gust : Classification of the Solute Concentration Profiles Accompanying the Discontinuous Reactions. In: Zeitschrift für Metallkunde . 91, 2000, p. 532 - 543 [Discontinuous reactions, Analytical electron microscopy, Solute concentration profiles].

P. Zieba, W. Gust : AEM of the Solute Redistribution During Discontinuous Dissolution. In: Mikrochimica Acta . 132, 2000, p. 295 - 299 [Analytical electron microscopy, EDX microanalysis, Doscontinuous dissolution, Solute redistribution].

Pawel Zieba: Recent Progress in the Energy Dispersive X-ray Spectroscopy Microanalysis of the Discontinuous Precipitation and Discontinuous Dissolution Reactions, (invited review). In: Materials Chemistry and Physics. 62, 2000, p. 183 - 213 [Interfaces, Discontinuous precipitation and dissolution, Electron microscopy, Energy dispersive X-ray analysis, Grain boundary diffusion].

Pawel Zieba, Wolfgang Gust: Mass Transport in Discontinuous Solid State Phase Transformations (solicited lecture). In: Advances in Science and Technology Vol. 29-Mass and Charge Transport in Inorganic Materials-Fundamentals to Devices. (Ed. P. Vincencini, V. Buscaglia) Faenza: TECHNA Srl, 2000, p. 749 - 760 [Discontinuous precipitation and dissolution, Grain boundary diffusion, Solute concentration profiles, EDX microanalysis, Mass transport].

G. A. Lopez, S. Sommadossi, Pawel Zieba, W. Gust, E.J.Mittemeijer: Kinetic behaviour of diffusion-soldered Ni/Al/Ni interconnections. In: Materials Chemistry and Physics. 9525, 2002, p. 1 - 6 [Diffusion soldering, Isothermal solidification; Ni-Al system; Intermetallic phases; Interdiffusion coefficient].

Pawel Zieba: Diffusion Along Migrating Grain Boundaries. In: Interface Science- Special issue devoted to short-circuit diffusion at interfaces in materials. 11, 2003, p. 51 - 58 [Grain boundary diffusion, Grain boundary migration, EDX analysis, Discontinuous precipitation, Discontinuous dissolution, Diffusion induced grain boundary migration].