Suche nach

Bibliographia Humboldtiana Index

Bibliographia Humboldtiana

I. Publikationen von Humboldt-Stipendiaten aus dem Ausland in 2013

Verfahrens- und Energietechnik

Al-Juboori, Prof. Dr.-Ing. Laith Abdullah Mohammed

Higher Colleges of Technology, United Arab Emirates
Fachgebiet: Computer-aided production
Gastgeber: Prof. Dr. Jürgen Bast Technische Universität Bergakademie Freiberg
  • Laith A. Mohammed, Ahmed A. Duroobi: Prediction the Effect of Cutting Parameters on Surface Roughness Using Taguchi Method. In: Eng.& Tech. Journal. 31, 2013, p. 2434 - 2442 [Taguchi Method].

  • Laith A. Mohammed, Shukry H. Aghdeab: Studying Parameters of EDM Based Micro- Cutting Holes Using ANOVA. In: Eng.& Tech. Journal. 31, 2013, p. 2876 - 2884 [EDM, ANOVA].

  • Laith A. Mohammed, Shukry H. Aghdeab: Experimental Investigations of Hole - EDM to optimize Electrode Wear through Full Factorial of Design of Experiment. In: Eng.& Tech. Journal. 31, 2013, p. 2572 - 2579 [Full Factorial of Design of Experiment, EDM].

Cheng, Dr. Lixin

Sheffield Hallam University, United Kingdom
Fachgebiet: Process engineering
Gastgeber: Prof. Dr. Dieter Mewes Gottfried Wilhelm Leibniz Universität Hannover
  • Lixin Cheng, Lei Liu: Boiling and Two Phase Flow Phenomena of Refrigerant-Based Nanofluids: Fundamentals, Applications and Challenges. In: International Journal of Refrigeration. 36, 2013, p. 421 - 446 [Refrigerant-based nanofluids, two-phase flow, pool boiling, flow boiling, condensation, heat transfer, flow patterns, pressure drop, correlation, prediction methods, nanoparticle, nanolubricant, mechanism, review. ].

  • Xiang Zhang, Lei Liu, Lixin Cheng, Qiuyue Guo, Ningsheng Zhang. : Experimental Study on Heat Transfer and Pressure Drop Characteristics of Air-Water Two-Phase Flow with the Effect of Polyacrylamide Additive in a Horizontal Smooth Circular Tube. In: International Journal of Heat and Mass Transfer. 58, 2013, p. 427 - 440 [Experiment, two-phase flow, horizontal, drag reduction, additive, polyacrylamide (PAM), gas-liquid, air-water,heat transfer, pressure drop, frictional, flow pattern, effect. ].

  • Lei Liu, Lixin Cheng: Effect of a Polymer Additive on Heat Transfer and Pressure Drop Behaviors of Upward Air-Water Flow in an Inclined Smooth Circular Tube. In: Heat Transfer Engineering. 34, 2013, p. 1099 - 1111 [Experimental, drag reduction, polymer additive, heat transfer, frictional, pressure drop, air-water, gas-liquid, inclined tube, analysis, mechanism.].

  • Lixin Cheng: Fundamental Issues of Critical Heat Flux Phenomena during Flow Boiling in Microscale-Channels and Nucleate Pool Boiling in Confined Spaces. In: Heat Transfer Engineering. 34, 2013, p. 1011 - 1043 [Fundamental, critical hea flux, CHF, flow boiling microscale channel, nucleate pool boiling, confined space, review, analysis, prediction methods, experimental results, mechanisms.].

  • Lixin Cheng: Advances in Microscale and Nanoscale Thermal and Fluid Sciences. New York: Nova Science Pub. Inc., 2013, 257 pp. [Advances, Micosscale, Nanoscale, Thermal, Fluid Flow, Experimental, Numerical, Review.].

Fritz, Dr. Wilfred Leslie Owen

Cape Peninsula University of Technology, South Africa
Fachgebiet: Energy engineering, energy technology, power engineering
Gastgeber: Prof. Dr. Krzysztof Rudion Universität Stuttgart
  • Dr. Wilfred Leslie Owen Fritz: Tying small renewable energy systems to the grid in South Africa. In: In: Energize – The independent power and energy journal of Southern Africa.. July, 2013, p. 62 - 64 [feed-in tariffs power quality stability of the grid].

Guo, Prof. Dr. Yuebin

University of Alabama, United States of America
Fachgebiet: Manufacturing engineering, production engineering
Gastgeber: Prof. Dr. Fritz Klocke Rheinisch-Westfälische Technische Hochschule Aachen
  • Y.B. Guo, A. Klink, F. Klocke: Multiscale modeling of sinking-EDM with Gaussian heat flux via user subroutine. In: Procedia CIRP. 6, 2013, p. 439 - 444 [EDM; gap phenomena; heat flux; multiscale modeling].

  • Y.B. Guo, A. Klink, C. Fu, J. Snydera: Machinability and surface integrity of Nitinol shape memory alloy. In: CIRP Annals - Manufacturing Technology. 62/1, 2013, p. 83 - 86 [Machinability, surface integrity, shape memory alloy].

Islam, Prof. Dr. Md. Akhtarul

Shahjalal University of Science and Technology, Bangladesh
Fachgebiet: Process engineering
Gastgeber: Prof. Dr. Mathias Ulbricht Universität Duisburg-Essen
  • Md. Akhtarul Islam, M. S. A. Amin, J. Hoinkis: Optimal design of an activated sludge plant: theoretical analysis. In: Applied Water Science. 10.1007, 2013, p. 13201 [activated sludge reactor - Optimal design - Settling tank].

Islam, Prof. Dr.-Ing. Rafiqul

University of Dhaka, Bangladesh
Fachgebiet: Energy engineering, energy technology, power engineering
Gastgeber: Prof. Dr. Jan Hoinkis Hochschule Karlsruhe - Technik und Wirtschaft
  • Rafiqul Islam, Anwar Zahid, M. Qumrul Hassan, Quazi Abdus Samad, M. Salim Khan, Rojibul Haque: Impact of Climate Change on Socio-economic Conditions of Bangladesh. Bangladesh: Alumni Association of German Universities in Bangladesh, 2013, 274 pp.

Karimi-Nasab, Dr. Mehdi

Kharazmi University, Germany
Fachgebiet: Production planning production control
Gastgeber: Prof. Dr. Wolfgang Brüggemann Universität Hamburg
  • M. Karimi-Nasab, S.M. Seyedhoseini: Multi-level lot sizing and job shop scheduling with compressible process times: A cutting plane approach. In: European Journal of Operational Research. 231, 2013, p. 598 - 616.

  • M. Karimi-Nasab, K. Sabri-Laghaie: Developing approximate algorithms for EPQ problem with process compressibility and random error in production / inspection. In: International Journal of Production Research. 52, 2013, p. 2388 - 2421.

  • M. Karimi-Nasab, S.M. Seyedhoseini, M. Modarres, M. Heidari: Multi-period lot sizing and job shop scheduling with compressible process times for multi-level product structures. In: International Journal of Production Research. 51, 2013, p. 6229 - 6246.

  • M. Karimi-Nasab, S. Dowlatshahi, H. Heidari: A multi-objective distribution-pricing model for multi-period price-sensitive demands. In: IEEE Transactions on Engineering Management. 60, 2013, p. 640 - 654.

  • M. Karimi-Nasab, I. Konstantaras: An inventory control model with stochastic review interval and special sale offer. In: European Journal of Operational Research. 227, 2013, p. 81 - 87.

Khujanov, M.Sc. Ravshanjon

Uzbekistan Academy of Sciences, Uzbekistan
Fachgebiet: Solar energy utilisation
Gastgeber: Prof. Dr. Stefan Rusche Hochschule RheinMain
  • Ravshanjon Khujanov, Shavkat Nurmatov: Use of Solar Power Plants in Uzbekistan with thermal Storage Technologies. In: 5th International Conference on European Science and Technology. 1, 2013, p. 420 - 422 [solar energy, energy storage, solar power plants, selected sites].

  • Ravshanjon Khujanov, Anvar Anarbaev: Status and Development of Solar Heating in Uzbekistan. In: International Conference Micro Perspectives for Decentralized Energy Supply. 2013.

  • Klychev Sh.I., Zakhidov R. A., Khujanov R., Klychev Z.Sh., Mukhtarov F., Aminov Z., Orlov S.A., Turgunov F.: Thermal Characteristics of Tubular Receivers of Solar Radiation Line Concentrators. In: Applied Solar Energy. 49, 2013, p. 235 - 240.

  • Khujanov, R., Heide, S. und Gampe U : Untersuchungen zum solaren Repowering fossiler Dampfkraftwerke am Beispiel Usbekistans. In: 45.Kraftwerkstechnisches Kolloquium . 2013.

  • Khujanov, R., Heide, S., Gampe U. : Research for solar repowering the example of the power plant Syrdarya. In: International Conference «Fundamental and Applied Problems of Physics» devoted to 70th anniversary of Physical-Technical Institute, Scientific Production Association “Physics-Sun” of Academy of Sciences of Uzbekistan. 2013.

  • Babakhodjaev R., Eshkuvvatov L., Turgunov, F. R., Sharipov, A., Khujanov, R.: The preliminary analysis of expediency of heating up of natural gas by solar energy on Syrdarya thermal power plant. In: Conference with international participation. «VIII all schools workshop for thermophysics and energy". . 2013.

Koshy, Prof. Dr.-Ing. Philip

McMaster University, Canada
Fachgebiet: Manufacturing engineering, production engineering
Gastgeber: Prof. Dr. Thomas Bergs Rheinisch-Westfälische Technische Hochschule Aachen
  • R. Babel, P. Koshy, M. Weiss: Acoustic emission spikes at workpiece edges in grinding: Origin and applications. In: International Journal of Machine Tools and Manufacture. 64, 2013, p. 96 - 101 [Acoustic emission; Burr formation; Contact length; Grinding burn; Process monitoring].

Kumar, Prof. Dr. Jitendra

Indian Institute of Technology (IIT) Kharagpur, India
Fachgebiet: Chemical process engineering
Gastgeber: Prof. Dr. Andreas Bück Friedrich-Alexander-Universität Erlangen-Nürnberg
  • Mubashir Hussain, Jitendra Kumar, Mirko Peglow, Evangelos Tsotsas: MODELING SPRAY FLUIDIZED BED AGGREGATION KINETICS ON THE BASIS OF MONTE-CARLO SIMULATION RESULTS. In: Chemical Engineering Science. 2013, [Mathematical modeling; Population balance; Kinetics; Simulation; Spray fluidized bed; Monte-Carlo].

Levchenko, Prof. Dr. Sergei

National Academy of Sciences of Belarus, Belarus
Fachgebiet: Energy management, power economy
Gastgeber: Prof. Dr. Alfred Voß Universität Stuttgart
  • Prof. Dr. Sergei Levchenko, Zorina T.G., Nikitin S.N. : Technology platforms: experience of Russia and EU and perspectives of its development in Belarus. In: Gosudarstvennaya Sluzhba (Public Administration). 6, 2013, p. 90 - 93 [Technology platform, energy efficiency].

Miccio, Dr. Francesco

Consiglio Nazionale delle Ricerche (CNR), Italy
Fachgebiet: Thermal process engineering
Gastgeber: Prof. Dr. Hartmut Spliethoff Universität Stuttgart
  • M. Miccio, F. Miccio: CONVERSION OF LIQUID AND GASEOUS FUELS IN FLUIDIZED BED COMBUSTION AND GASIFICATION . In: Fluidized bed technologies for near-zero emission combustion and gasification. (Ed. F. Scala) Woodhead Publishing Limited , 2013, [Fluidized bed, liquid fuels].

Sathiyamoorthy, Prof. Dr. Dakshinamoorthy

Institut Teknologi Brunei, Brunei Darussalam
Fachgebiet: Chemical process engineering
Gastgeber: Prof. Dr. Alfons Vogelpohl Technische Universität Clausthal
  • Mandal, D. Vinjamur, M. Sathiyamoorthy, D : Hydrodynamics of beds of small particles in the voids of coarse particles. In: Powder Technology. 235, 2013, p. 256 - 262 [Hydrodynamics of beds, Fluidized bed, Voids].

  • Jyoti, P., Venugopalan, R., Paul, B., Bahadur, J., Ghosh, S.K., Sathiyamoorthy, D: Study of thermal degradation behavior of dense and nanostructured silicon carbide coated carbon fibers in oxidative environments. In: Corrosion Science. 67, 2013, p. 142 - 151 [thermal degradation behavior, fluidized bed].

  • Selvakumar, J., Sathiyamoorthy, D.: Prospects of chemical vapor grown silicon carbide thin films using halogen-free single sources in nuclear reactor applications: A review. In: Journal of Materials Research. 28, 2013, p. 136 - 149 [Prospects of chemical vapor grown silicon carbide thin films, fluidized bed].

  • Venugopalan, R., Roy, M., Thomas, S., Sathiyamoorthy, D., Tyagi, A.K. : Effect of Impregnation Pressure and Time on the Porosity, Structure and Properties of PAN-Fiber Based Carbon Composites. In: Journal of Nuclear Materials. 433, 2013, p. 494 - 503 [Impregnation Pressure, PAN-Fiber Based Carbon Composites, Fluidized bed].

Su, Dr. Yuanhai

Chinese Academy of Sciences, People's Republic of China
Fachgebiet: Chemical process engineering
Gastgeber: Prof. Dr. Eugeny Kenig Universität Paderborn
  • Kenig, E.Y., Su, Y., Lautenschleger, A., Chasanis, P. and Grünewald, M.: Micro-separation of fluid systems: A state-of-the-art review. In: Separation and Purification Technology. 120, 2013, p. 245 - 264.

Tomin, Dr. Nikita

Russian Academy of Sciences, Russian Federation
Fachgebiet: Electrical energy / power engineering
Gastgeber: Prof. Dr. Christian Rehtanz Technische Universität Dortmund
  • Victor Kurbatsky, Nikita Tomin, Vadim Spiryaev, Paul Leahy, Denis Sidorov : Power System Parameters Forecasting Using Hilbert-Huang Transform and Machine Learning. In: News of Irkutsk State University. 4, 2013, p. 1 - 13 [power systems parameters, forecasting, integral transforms, artifical neural networks, smachine learning, Hilbert-Huang Transform].

  • Nicolay Voropai, Dmitry Efimov, Irina Kolosok, Victor Kurbatsky, Anna. Glazunova, Elena Korkina, Alexey Osak, Nikita Tomin, Daniil Panasetsky: Smart technologies in emergency control of Russia's unified energy system. In: IEEE Transactions on Smart Grid. 4 (3), 2013, p. 1732 - 1740 [Artificial intelligence application, electric power system, emergency control, smart grid concept.].

Zhang, Dr. Shuwei

Draworld Environment Research Centre (DERC), People's Republic of China
Fachgebiet: Energy management, power economy
Gastgeber: Prof. Dr. Ottmar Edenhofer Potsdam-Institut für Klimafolgenforschung (PIK)
  • Shuwei Zhang; Nico Bauer: Utilization of the non-fossil fuel target and its implications in China. In: Climate Policy. 13, 2013, p. 1 - 18 [carbon intensity; China; energy intensity; non-fossil fuel target].

  • Shuwei Zhang, Nico Bauer, Gunnar Lunderer, Elmar Kriegler: Role of technologies in energy-related CO2 mitigation in China within a climate-protection world: A scenarios analysis using REMIND. In: Applied Energy. 2013, [Energy technologies Carbon emission mitigation China].