Search for

Bibliographia Humboldtiana Index

Bibliographia Humboldtiana

I. Publications by Humboldt Research Fellows from abroad

Process engineering, energy engineering and technology

Agbo, Dr. Solomon Nwabueze

, Germany
Field of research: Solar energy utilisation
Host: Dr. Tsvetelina Merdzhanova Forschungszentrum Jülich GmbH
  • Solomon N. Agbo, Tsvetelina Merdzhanova, Uwe Rau and Oleksandr Astakhov: Illumination intensity and spectrum-dependent performance of thin-film silicon single and multijunction solar cells. In: Solar Energy Materials and Solar Cell . 159, 2017, p. 427 - 434 [Thin-film silicon, Multijunction solar cells, Illumination sources and intensity, Fill factor, Open-circuit voltage, Short-circuit current density].

  • Solomon N. Agbo, Tsvetelina Merdzhanova, Shicheng Yu, Hermann Tempel, Hans Kungl, Rüdiger-A. Eichel, Uwe Rau, Oleksandr Astakhov: Development towards cell-to-cell monolithic integration of a thin-film solar cell and lithium-ion accumulator. In: Journal of Power Sources. 327, 2016, p. 340 - 344 [Thin-film silicon solar cell, Lithium ion battery, Monolithic integration, Charging efficiency, Duty factor].

  • Solomon N. Agbo, Tsvetelina Merdzhanova, Shicheng Yu, Hermann Tempel, Hans Kungl, Rudiger-A. Eichel, Uwe Rau, and Oleksandr Astakhov: Photoelectrochemical application of thin-film silicon triple-junction solar cell in batteries. In: Physica Status Solidi A. 213, 2016, p. 1926 - 1931 [electrochemical storage, lithium ion batteries, silicon, thin-films, triple-junction solar cells].

  • Assumpta C. Nwanya, Solomon U. Offiah, Ifeanyichukwu C. Amaechi, Solomon Agbo, Sabastine C. Ezugwu, B.T. Sone, Rose U. Osuji, Malik Maaza, Fabian I. Ezema: Electrochromic and electrochemical supercapacitive properties of Room Temperature PVP capped Ni(OH)2/NiO Thin Films. In: Electrochimica Acta. 171, 2015, p. 128 - 141 [PVP-capped Ni(OH)2 thin films, specific capacitance, optical density, coloration efficiency].

  • Florian Sandbaumhuter, Solomon Agbo, Chi-Long Tsai, Oleksandr Astakhov, Sven Uhlenbruck, Uwe Rau, Tsvetelina Merdzhanova: Compatibility study towards monolithic self-charging power unit based on all-solid thin-film solar module and battery. In: Journal of Power Sources. 365, 2017, p. 303 - 307 [Thin-film silicon solar module, All-solid thin-film Li battery, PV-battery monolithic integration, solar-to-battery charging efficiency.].

Alemany, Prof. Dr.-Ing. Juan Manuel

Universidad Nacional de Rio Cuarto, Argentina
Field of research: Electrical energy / power engineering
Host: Prof. Dr. Zbigniew Styczynski Otto-von-Guericke-Universität Magdeburg
  • Juan Manuel Alemany, Przemyslaw Komarnicki, Jeremy Lin, Fernando Magnago: Exploiting symmetry in unit commitment solutions for a large-scale electricity market. In: Electric Power Systems Research. 2016, [Large-scale electricity market; Mixed-integer linear programming; Symmetry; Unit commitment; Units with identical costs].

  • Juan Manuel Alemany, Fernando Magnago, Pio Lombardi, Bartlomiej Arendarski, Przemyslaw Komarnicki: Multi-Objective Optimization Model for Wind Power Allocation. In: Mathematical Problems in Engineering. In Press, 2017, [Augmented ε-constrained Method, Mixed Integer Linear Programming, Multi-Objective Optimization, Load Supplying Improvement, Wind Farm Allocation.].

Ali, Prof. Dr.-Ing. Ahmed Hamza H.

Assiut University, Egypt
Field of research: Energy engineering, energy technology, power engineering
Host: Dr. Christian Dötsch Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik (UMSICHT)
  • Ahmed Hamza H. Ali, Peter Noeres and Clemens Pollerberg: Performance assessment of an integrated free cooling and solar powered single effect lithiom bromide-water absprtion chiller. In: Solar Energy. 82, 2008, p. 1021 - 1030 [Solar cooling; Free cooling; Absorption chillers; Lithium bromide–water].

  • Ahmed Hamza H. Ali, Mahmoud Gaber Morsy: Thermal Perception and Energy Consumption: A Comparative Study between Radiant Panel and Portable Convective Heaters. In: Energy and Buildings: Efficiency, Air Quality, and Conservation. (Ed. Joseph B. Utrick) USA: Nova Science Publishers Inc., 2009, [ISBN: 978-1-60741-049-2 Radiant panel heater, conventional natural convective heater, indoor thermal environment perception, energy saving].

  • Ahmed Hamza H. Ali and Ibrahim M. Ismail: Evaporator Air-Side Fouling: Effect on Performance of Room Air Conditioners and Impact on Indoor Air Quality. In: Int. J. of HVAC&R Research. 14, 2008, p. 209 - 219 [HVAC heat exchangers fouling, Airside fouling, Performance of unitary air conditioner, Indoor air quality.].

  • Pollerberg C., Ahmed Hamza H. Ali and Dötsch C: Experimental Study on the Performance of a Solar Driven Steam Jet Ejector Chiller. In: Energy Conversion and Management. 49, 2008, p. 3318 - 3325 [Solar cooling, Steam jet ejector cooling, Water refrigerant].

  • Pollerberg C., Ahmed Hamza H. Ali and Dötsch C: Solar Driven Steam Jet Ejector Chiller. In: Applied Thermal Engineering. 29, 2009, p. 1245 - 1252 [Solar energy, Solar cooling, Steam jet ejector chiller, Parabolic trough collector, Vacuum collector, Cold water generation].

  • Ahmed Hamza H. Ali: Delineation of frost formation on cold walls by aid of psychrometric saturation: Formula of demarcation and frost characteristics. In: Energy Conversion and Management. 50, 2009, p. 1570 - 1577 [Frost, Cold storage, Psychrometric chart, Evaporator, Coil, Performance].

  • Ahmed Hamza H. Ali and Peter Schwerdt: Characteristics of the membrane utilized in a compact absorber for lithium bromide-water absorption cooling chillers. In: Int. J. of Refrigeration. 32, 2009, p. 1886 - 1896 [Absorption system, Water/lithium bromide Modelling, Mass transfer, Heat transfer, Membrane, Absorber].

  • Ahmed Hamza H. Ali and Peter Schwerdt: For designing a compact absorber with membrane contactor at liquid-vapor interface: Influence of membrane properties on water vapour transfer. In: ASHRAE Transactions. 116, 2010, [OR-10-043].

  • Ahmed Hamza H. Ali: Design of a Compact Absorber with a Hydrophobic Membrane Contactor at the Liquid Vapor Interface for Lithium Bromide-Water Absorption Chillers. In: Applied Energy. 87, 2010, p. 1112 - 1121 [Absorber, Design, Membrane, Absorption system, Lithium bromide].

  • Ahmed Hamza H. Ali and Mahmoud Gaber Morsy: Energy Efficiency and Indoor Thermal Perception: A Comparative Study between Radiant Panel and Portable Convective Heaters. In: Energy Efficiency. 2010, [DOI 10.1007/s12053-010-9077-3 Energy efficiency - Radiant panel heater - Conventional natural convective heater - Indoor environment thermal perception - Energy saving ].

  • Ahmed Hamza H. Ali, Mahmoud Ahmed and M. S. Youssef. : Characteristics of Heat Transfer and Fluid Flow in a Channel with Single-Row Plates Array Oblique to Flow Direction for Photovoltaic/Thermal System. In: Energy. 2010.

Alkan, Dr.-Ing. habil. K. Hakan

Institut für Sicherheitstechnologie (ISTec) GmbH, Germany
Field of research: Energy engineering, energy technology, power engineering
Host: Prof. Dr. Günter Pusch Technische Universität Clausthal
  • Hakan Alkan, Yildiray Cinar, Günter Pusch : Rock Salt Dilatancy Boundary From Combined Acoustic Emission and Triaxial Compression Tests. In: International Journal of Rock Mechanics & Mining Sciences. 44, 2007, p. 108 - 120 [Rock salt, triaxial tests, dilatancy, acoustic emission].

  • Hakan Alkan, Wolfgang Müller: Approaches for modelling gas flow in clay formations as repository systems. In: J. Phys. Chem. Earth. 33, 2008, p. 5260 - 5268 [Gas flow, clay formations, repository systems, numerical modelling].

  • Hakan Alkan: Percolation Model for Dilatancy-Induced Permeability of the Excavation Damaged Zone in Rock Salt. In: Int J Rock Mech Mining Sci. 46, 2009, p. 716 - 724 [Percolation, rock salt, permeability, dilatancy, EDZ].

  • Hakan Alkan: The Role of the Petroleum Engineering on Geothermal Reservoir Assessments, Erdöl Erdgas Kohle 124. Jg. 2008, 2, 82-88. In: Erdöl Erdgas Kohle . 124, 2008, p. 82 - 88 [Geothermal, reservoir engineering, petroleum engineering, reservoir assessments].

Banabic, Prof. Dr.-Ing. Dorel

Technical University of Cluj-Napoca, Romania
Field of research: Materials engineering, materials technology
Host: Prof. Dr. Klaus Siegert Universität Stuttgart
  • Dorel Banabic: Advanced Methods in Material Forming. Heidelberg: Springer, 2007, 362 pp. [Metal Forming, Modeling, Simulation].

  • Dorel Banabic, Fred Barlat, Oana Cazacu, Toshihiko Kuwabara: Anisotropy and formability. In: Advances in Material Forming. (Ed. Francisco Chinesta) Heidelberg: Springer, 2007, p. 143 - 173 [Anisotropy, Formability, Sheet metals].

  • Dan Sorin Comsa, Dorel Banabic: Numerical simulation of sheet metal forming processes using a new yield criterion. In: Key Engineering Materials. 344, 2007, p. 833 - 840 [Numerical simulation, Yield criteria, Sheet metal simulation ].

  • Dorel Banabic, Martijn Vos: Modelling of the Forming Limit Band ¿A new Method to Increase the Robustness in the Simulation of Sheet Metal Forming Processes. In: Annals of CIRP. 56, 2007, p. 249 - 253 [Formability, Forming Limit Bands, Aluminium alloys].

  • Dorel Banabic, M. Vos, L. Paraianu, P. Jurco: Increasing the Robustness of the Sheet Metal Forming Simulation by the Prediction of the Forming Limit Band. In: Numerical Methods of Industrial Forming Processes. (Ed. De Sa) Porto: American Institute of Physics, 2007, p. 171 - 178 [Formability, Robust simulation, Aluminium alloys].

  • D. Banabic, D.S. Comsa, L. Paraianu: A method for the evaluation of the accuracy of anisotropic yield criteria. In: Sheet Metal Forming. (Ed. K. Narashimhan) Bombay: SMFRA, 2007, p. 14.1 - 14.12 [Anisotropy, Yield criteria, Simulation].

  • Dorel Banabic: Sheet Metal Forming Processes. Berlin-Heidelberg: Springer, 2010, 312 pp. [Sheet metal forming, Constitutive equations, Forming simulation, Anisotropy].

  • Soare S., Banabic D.: Application of a polynomial yield function to the predictions of limit strains. In: Steel Research International . 79, 2008, p. 39 - 46.

  • L. Paraianu, D. Banabic: A new method for the evaluation of the yield criteria accuracy. In: Computer Methods in Materials Science. 9, 2009, p. 148 - 152.

  • Banabic D., Hußnätter, W.: Modeling the Material Behavior of Magnesium Alloy AZ31 Using Different Yield Criteria. In: International Journal of Advanced Manufacturing Technology. 44, 2009, p. 969 - 976.

  • M. O’Donnell, D. Banabic, A. G. Leacock, D. Brown, R. J. McMurray,: The Effect of Pre-Strain and Inter-Stage Annealing on the Formability of a 2024 Aluminium Alloy. In: International Journal of Material Forming. 1, 2008, p. 253 - 256.

  • M. O’Donnell, A. G. Leacock, D. Banabic, D. Brown, R. J. McMurray: The Effect of Pre-Strain and Solution Heat Treatment on the Formability of a 2024 Aluminium Alloy. In: International Journal of Material Forming. 1, 2008, p. 257 - 260.

  • Soare S., Banabic D.: A note on the MK computational model for predicting the forming limit strains. In: International Journal of Material Forming. 1, 2008, p. 281 - 284.

  • S. Soare, D. Banabic: About the mechanical data required to describe the anisotropy of thin sheets to correctly predict the earing of deep-drawn cups. In: International Journal of Material Forming. 1, 2008, p. 285 - 288.

  • Soare S., Banabic D.: A discussion upon the sensitivity of the MK model to input data. In: International Journal of Material Forming. 2, 2009, p. 503 - 506.

  • Soare S., Banabic D.: A four parameter in-plane isotropic yield function. In: International Journal of Material Forming. 2, 2009, p. 507 - 510.

  • Banabic D., Soare S.: Assessment of the Modified Maximum Force Criterion for Aluminum Metallic Sheets. In: Key Engineering Materials. 410-411, 2009, p. 511 - 520.

  • D. Banabic, L. Paraianu, G. Dragos, I. Bichis, D. S. Comsa : An improved version of the modified maximum force criterion (MMFC) used for predicting the localized necking in sheet metals. In: Proceedings of the Romanian Academy. 10, 2010, p. 237 - 243.

  • D. Banabic, F. Barlat, O. Cazacu, T. Kuwabara: Advances in Anisotropy and Formability. In: International Journal of Material Forming. 3, 2010, p. 1 - 30.

  • L. Paraianu, G. Dragos, I. Bichis, D. S. Comsa, D. Banabic: A new formulation of the modified maximum force criterion (MMFC). In: International Journal of Material Forming. 3, 2010, p. 243 - 246.

Bansal, Prof. Dr. Narendra Kumar

Center for Environmental Planning and Technology University (CEPT), India
Field of research: Energy engineering, energy technology, power engineering
Host: Prof. Dr. Peter Häupl Technische Universität Dresden
  • Narendra Kumar Bansal: Science, Technology and Society: Energy Security for India. In: Energy Security, Climate Change and Sustainable Development. (Ed. Jyotirmay Mathur, H.-J. Wagner, N. K. Bansal) New Delhi: Anamaya Publishers, 2007, p. 15 - 24.

Beshay, Prof. Dr. Usama

Mubarak City for Scientific Research and Technology Applications, Egypt
Field of research: Bio-processing technology and engineering
Host: Prof. Dr. Erwin Flaschel Universität Bielefeld
  • Usama Beshay, Gerd Miksch, Erwin Flaschel: Improvement of a Beta-glucanase activity test by taking into account the batch reactor balance of the test system. In: Bioprocess and Biosystems Engineering. 30, 2007, p. 251 - 259 [Enzyme activity, Beta-glucanase, Batch reactor balance, Reaction kinetics, IMAC].

  • Usama Beshay, Gerhard Miksch, Karl Friehs, Erwin Flaschel: Increasing the secretion ability of the kil gene for recombinant proteins in Escherichia coli by using a strong stationary-phase promoter. In: Biotechnology Letters. 29, 2007, p. 1893 - 1901 [Beta-glucanase, Synthetic stationary phase promoter, Fermentation, E. coli].

Catic, Prof. Dr. Igor

University of Zagreb, Croatia
Field of research: Manufacturing engineering, production engineering
Host: Prof. Dr. Georg Menges Rheinisch-Westfälische Technische Hochschule Aachen
  • Igor Catic, Meja Runic-Sokele, Borislav Dadic: Energy or Information?. In: Synthesis Philosophica . 49, 25, 2010, p. 173 - 180.

Chakraborty, Prof. Dr. Mousumi

S.V. National Institute of Technology, India
Field of research: Process engineering
Host: Prof. Dr. Hans-Jörg Bart Technische Universität Kaiserslautern
  • Mousumi Chakraborty,Hans-Jörg Bart: Highly selective and efficient transport of toluene in bulk ionic liquid membranes containing Ag+ as carrier. In: Fuel Processing and Technology . 88, 2007, p. 43 - 49 [Ionic liquid membrane, Separation factor, Selectivity of aromatics].

  • Mousumi Chakraborty, Jaydeep M Barad and Hans-Jörg Bart: Formation and stability study of nano-emulsions: BTX-separation. In: The Open Chemical Engineering Journal. 3, 2009, p. 33 - 40 [Nano emulsion liquid membrane, Stability, BTX separation].

  • Mousumi Chakraborty, Jaydeep M Barad and Hans-Jörg Bart: Stability and performance study of w/o/w emulsion: extraction of aromatic amines. In: Industrial & Engineering Chemistry Research. 49, 2010, p. 5808 - 5815 [w/o/w emulsion, stability, aromatic amines].

Cheng, Dr. Lixin

University of Aarhus, Denmark
Field of research: Process engineering
Host: Prof. Dr. Dieter Mewes Gottfried Wilhelm Leibniz Universität Hannover
  • Lixin Cheng, Tingkuan Chen: Study of Vapor-Liquid Two-Phase Frictional Pressure Drop in a Vertical Heated Spirally Internally Ribbed Tube. In: Chemical Engineering Science. 62, 2007, p. 783 - 792 [Two-phase flow, Vapor liquid, Frictional pressure drop, Flow boiling, Spirally internally ribbed tube, Homogeneous model, Friction factor, Kerosene ].

  • Lixin Cheng: Modeling of Heat Transfer of Upward Annular Flow in Vertical Tubes. In: Chemical Engineering Communications. 194, 2007, p. 975 - 993 [Annular flow, Deposition, Entrainment, Flow boiling, Heat transfer, Models, Spirally internally ribbed tube].

  • Lixin Cheng, Dieter Mewes, Andrea Luke: Boiling Phenomena with Surfactants and Polymeric Additives: A State-of-the-Art Review. In: Int. J. Heat Mass Transfer. 50, 2007, p. 2744 - 2771 [Boiling; Enhanced heat transfer; Surfactant; Polymeric additives; Drag reduction; Confined spaces; Microchannels; Boiling patterns].

  • Lixin Cheng, Gherhardt Ribatski, Jesús Moreno Quibén, John R. Thome: New Prediction Methods for CO2 Evaporation inside Tubes: Part I - A Two-Phase Flow Pattern Map and a Flow Pattern Based Phenomenological Model for Two-Phase Flow Frictional Pressure Drops. In: International Journal of Heat and Mass Transfer. 51, 2008, p. 111 - 124 [Flow pattern map; Flow patterns; Phenomenological; Flow boiling; Two-phase flow; Frictional pressure drop; Maacro-channel; Micro-channel; CO2.].

  • Lixin Cheng, Gherhardt Ribatski, John R. Thome: New Prediction Methods for CO2 Evaporation inside Tubes: Part II - An Updated General Flow Boiling Heat Transfer Model Based on Flow Patterns. In: International Journal of Heat and Mass Transfer. 51, 2008, p. 125 - 135 [Model; Flow patterns; Flow boiling; Heat transfer; Macro-channel; Micro-channel; CO2].

  • John R. Thome, Lixin Cheng, Gherhardt Ribatski, Lui F. Vales : Flow Boiling of Ammonia and Hydrocarbons: A State-of-the-Art Review. In: International Journal of Refrigeration. 31, 2008, p. 603 - 620 [Heat exchanger; Survey; Evaporation; Ammonia; Hydrocarbon; Heat transfer; Pressure drop; Two-phase flow; Comparison; Experiment].

  • Lixin Cheng, Enio P. Bandarra Filho, John R. Thome,: Nanofluid Two-Phase Flow and Thermal Physics: A New Research Frontier of Nanotechnology and Its Challenges. In: Journal of Nanoscience and Nanotechnology. 8, 2008, p. 3315 - 3332 [Nanofluids; Two-Phase Flow; Flow Boiling; Condensation; Heat Transfer; Flow Patterns; Critical Heat Flux; Pressure Drop; Microchannel.].

  • Lixin Cheng, Gherhardt Ribatski, John R Thome : Two-Phase Flow Patterns and Flow-Pattern Maps: Fundamentals and Applications. In: ASME Applied Mechanics Review. 61, 2008, p. 050802-1 - 050802-28 [Two-Phase Flow; Flow Patterns; Flow Pattern Maps; Macro-Scale Channels; Micro-Scale Channels; Aiabatic; Diabatic; Tube Bundles; Microgravity; Complex Channels; Heat Transfer Model; Pressure Drop Models.].

  • Lixin Cheng, Gherhardt Ribatski, John R. Thome: Analysis of Supercritical CO2 Cooling in Macro- and Micro-channels. In: International Journal of Refrigeration. 31, 2008, p. 1301 - 1316 [Carbon Dioxide; Transcritical Cycle; Survey; Correlation; Heat Transfer; Pressure Drop; Heat Exchanger; Tube; Microchannel; Cooling.].

  • Lixin Cheng: Nanofluid Heat Transfer Technologies. In: Recent Patents on Engineering. 3, 2009, p. 1 - 7 [Nanofluids; Nano-particles; Thermal conductivity; Single phase heat transfer; Nucleate boiling; Flow boiling; Evaporation; Critical heat flux (CHF); Heat transfer enhancement; Cooling; Micro-channels; Energy efficiency; Thermal system.].

  • E.P.Bandarra Filho, Lixin Cheng and John R. Thome: Flow Boiling Characteristics and Flow Pattern Visualization of Refrigerant/Lubricant Oil Mixtures. In: Int. J. Refrigeration. 32, 2009, p. 185 - 2002 [Refrigerant; Boiling; Survey; Flow; Mixture; Oil; Heat Transfer; Pressure Drop; Visualization; Distribution; Velocity.].

  • Lixin Cheng, John R. Thome: Cooling of Microprocessors Using Flow Boiling of CO2 in a Micro-evaporator: Preliminary Analysis and Performance Comparison. In: Applied Thermal Engineering. 29, 2009, p. 2426 - 2432 [CO2, Flow Boiling, Heat Transfer, Evaporation, Two-phase Flow, Pressure Drop, Microchannel, Chips, Cooling, Microprocessor, Micro-evaporator].

  • Jesus Moreno Quiben, Lixin Cheng, Ricardo J. da Silva Lima and John R. Thome: Flow Boiling in Horizontal Flattened Tubes: Part I - Two-Phase Frictional Pressure Drop Results and Model. In: Int. J. Heat Mass Transfer. 52, 2009, p. 3634 - 3644 [Flow Boiling; Two-Phase Flow; Diabatic; Frictional Pressure Drop; Flattened Tube; Flow Patterns; Phenomenological; Experiment; Model; R22; R410A].

  • Jesus Moreno Quiben, Lixin Cheng, Ricardo J. da Silva Lima and John R. Thome: Flow Boiling in Horizontal Flattened Tubes: Part II - Flow Boiling Heat Transfer Results and Model. In: Int. J. Heat Mass Transfer. 52, 2009, p. 3645 - 3653 [Flow Boiling; Heat Transfer; Flattened Tube; Experiments, Flow Patterns; Flow Pattern Map; Model; R22; R410A].

  • Lixin Cheng, John R. Thome: Two-Phase Flow and Heat Transfer of Sub- and Super-critical CO2 in Macro- and Micro-channels. In: Multiphase Flow Research. (Ed. S. Martin, J.R. Williams) New York: Nova Science Publishers, Inc., 2009, p. 543 - 620 [CO2, natural Refrigerant, two-phase flow, evaporation, flow boiling, flow patterns, flow pattern map, pressure drop, model, oil, electronic chips cooling, sub-critical, supercritical, gas-cooler, two-phase distribution, supercritical flow distribution.].

  • Lixin Cheng: Single-Phase Incompressible Fluid flow in Mini- and Micro-Channels. In: Fluid Mechanics and Pipe Flow: Turbulence, Simulation and Dynamics. (Ed. Donald Matos, Cristian Valerio) New York: Nova Science Publishers, Inc., 2009, p. 343 - 364 [Fluid flow, Single Phase, Incompressible, Mini, Micro, Channel.].

  • Lixin Cheng, Dieter Mewes (Ed.): Advances in Multiphase Flow and Heat Transfer (e-book series) Vol. 1. Bentham: Bentham Science Publishers Ltd., 2009, 287 pp. [Advances, Multiphase Flow, Heat Transfer, Review, Research, Studies].

  • Lixin Cheng, Dieter Mewes (Ed.): Advances in Multiphase Flow and Heat Transfer (e-book series) Vol. 2. Bentham: Bentham Science Publishers Ltd., 2009, 307 pp. [Advances, Multiphase Flow, Heat Transfer, Review, Research, Studies].

  • Lixin Cheng, Gherhardt Ribatski, John R. Thome: Advances in Fundamental and Applied Research of Gas-Liquid Two-Phase Flow Patterns and Flow Pattern Maps. In: Chinese Mechanics Abstract. 23, 2009, p. 1 - 37 Original author: Lixin Cheng, Gherhardt Ribatski, John R. Thome (Chinese) [Review, Advances, Two-Phase Flow, Flow Pattern, Flow Pattern Map, Gas-Liquid, Fundamental, Applied, Macro-Scale, Nano-Scale, Nanofluids].

  • Lixin Cheng: Microscale and Nanoscale Thermal and Fluid Transport Phenomena: Rapidly Developing Research Fields. In: International Journal of Microscale Nanoscale Thermal & Fluid Transport Phenomena. 1, 2010, p. 3 - 6 [Microscale, Nanoscale, Thermal Fluid, Transport Phenomena, Research Fields.].

  • Lixin Cheng, Hanfeng Zou : Evaluation of Flow Boiling Heat Transfer Correlations with Experimental Data of R134a, R22, R410A and R245fa in Microscale Channels. In: International Journal of Microscale and Nanoscale Thermal & Fluid Transport Phenomena. 1, 2010, p. 363 - 380 [Flow boiling, two-phase flow, microcale, micro channels, correlations, refrigerants, evaluation, prediction, analysis, mechanisms.].

  • Lixin Cheng: Critical Heat Flux in Microscale Channels and Confined Spaces: A Review on Experimental Studies and Prediction Methods. In: Russian Chemical Journal-Journal of Mendeleev’s Russian Chemical Society. 2, 2011, p. 85 - 98 [Critical heat flux, pool boiling, flow boiling, microscale channel, confined space, experimental, prediction method.].

  • Lixin Cheng, Lei Liu: Analysis and Evaluation of Gas-Liquid Two-Phase Frictional Pressure Drop Prediction Methods for Microscale Channels. In: International Journal of Microscale and Nanoscale Thermal & Fluid Transport Phenomena. 2, 2011, p. 259 - 280 [Two phase flow, gas liquid, frictional, pressure drop, prediction methods, microscale channel, macroscale, microscale, effect, evaluation, analysis.].

  • Lixin Cheng: Microscale and Nanoscale Thermal and Fluid Transport Phenomena: Rapidly Developing Research Fields. In: Fluid Transport: Theory, Dynamics and Applications. (Ed. Emma T Berg) New York: Nova Science Publishers Inc., 2011, p. 237 - 240 [Microscale, nanoscale, thermal, fluid flow, transport phenomena.].

  • Lixin Cheng, Dieter Mewes: Advances in Multiphase Flow and Heat Transfer, Vol. 3. Sharjah: Bentham Science Publishers., 2012, 340 pp. [Miltiphase flow, heat transfer, advances, state-of-the-art review, research.].

  • Lixin Cheng, Dieter Mewes: Advances Advances in Multiphase Flow and Heat Transfer, Vol. 4. Sharjah: Bentham Science Publishers, 2012, 208 pp. [Multiphase flow, heat transfer, state-of-the-art review, research.].

  • Lixin Cheng: Frontier Research in Microscale and Nanoscale Thermal and Fluid Sciences. New York: Nova Science Publishers, 2012, 402 pp. [Microscale, nanoscale, thermal, fluid flow, review, experimental, theoretical, anaalysis.].

  • Lixin Cheng, Lei Liu, Dieter Mewes: Drag Reduction with Surfactants and Polymeric Additives in Multiphase Flow. In: Advances in Multiphase Flow and Heat Transfer. (Ed. Lixin Cheng, Dieter Mewes) Sharjah: Bentham Science Publishers, 2012, p. 149 - 174 [Multi-phase flow, drag reduction, surfactant, polymer, additive, flow pattern, gas-liquid two phase flow, liquid-liquid two phase flow, gas-liquid-liquid three-phase flow, mechanisms. ].

  • Lixin Cheng: Critical Heat Flux in Microscale Channels and Confined Spaces: A Review on Experimental Studies and Prediction Methods. In: Russian Journal of General Chemistry. 82, 2012, p. 2116 - 2131 [Critical heat flux, flow boiling, pool boiling, dryout, microscale channel, confined space, experimental, theoretical, prediction method, review, analysis, mechanism.].

  • Lixin Cheng, Lei Liu: Boiling and Two Phase Flow Phenomena of Refrigerant-Based Nanofluids: Fundamentals, Applications and Challenges. In: International Journal of Refrigeration. 36, 2013, p. 421 - 446 [Refrigerant-based nanofluids, two-phase flow, pool boiling, flow boiling, condensation, heat transfer, flow patterns, pressure drop, correlation, prediction methods, nanoparticle, nanolubricant, mechanism, review. ].

  • Xiang Zhang, Lei Liu, Lixin Cheng, Qiuyue Guo, Ningsheng Zhang. : Experimental Study on Heat Transfer and Pressure Drop Characteristics of Air-Water Two-Phase Flow with the Effect of Polyacrylamide Additive in a Horizontal Smooth Circular Tube. In: International Journal of Heat and Mass Transfer. 58, 2013, p. 427 - 440 [Experiment, two-phase flow, horizontal, drag reduction, additive, polyacrylamide (PAM), gas-liquid, air-water,heat transfer, pressure drop, frictional, flow pattern, effect. ].

  • Lei Liu, Lixin Cheng: Effect of a Polymer Additive on Heat Transfer and Pressure Drop Behaviors of Upward Air-Water Flow in an Inclined Smooth Circular Tube. In: Heat Transfer Engineering. 34, 2013, p. 1099 - 1111 [Experimental, drag reduction, polymer additive, heat transfer, frictional, pressure drop, air-water, gas-liquid, inclined tube, analysis, mechanism.].

  • Lixin Cheng: Fundamental Issues of Critical Heat Flux Phenomena during Flow Boiling in Microscale-Channels and Nucleate Pool Boiling in Confined Spaces. In: Heat Transfer Engineering. 34, 2013, p. 1011 - 1043 [Fundamental, critical hea flux, CHF, flow boiling microscale channel, nucleate pool boiling, confined space, review, analysis, prediction methods, experimental results, mechanisms.].

  • Lixin Cheng: Advances in Microscale and Nanoscale Thermal and Fluid Sciences. New York: Nova Science Pub. Inc., 2013, 257 pp. [Advances, Micosscale, Nanoscale, Thermal, Fluid Flow, Experimental, Numerical, Review.].

  • Lixin Cheng: Frontiers and Progress in Multiphase Flow I . Germany: Springer Publishers, 2014, 212 pp. [Multiphase Flow, two phase flow, flow boiling, micro-channel, ].

  • Lixin Cheng: Boiling Heat Transfer and Critical Heat Flux Phenomena of Nanofluids. In: Nanoscale Flow: Advances, Modeling and Applications. (Ed. Sarhan M. Musa) USA: CRC Press-Taylor and Francis Group, LLC, 2014, p. 1 - 30 [Nanofluids, nucleate boiling, flow boiling, heat transfer, critical heat flux, mechanism, nanoparticle, experiment, modelling, analysis].

  • Lixin Cheng: Evaluation of Correlations for Supercritical CO2 Cooling Convective Heat Transfer and Pressure Drop in Macro- and Micro-Scale Tubes. In: International Journal of Microscale and Nanoscale Thermal & Fluid Transport Phenomena. 5, 2014, p. 113 - 126 [Supercritical cooling, CO2, convection, heat transfer, pressure drop, correlation, macro- and micro-scale channels, evaluation.].

  • Lixin Cheng: Flow Boiling Heat Transfer and Critical Heat Flux Phenomena of Nanofluids in Microscale Channels. In: International Journal of Micoscale and Nanoscale Thermal & Fluid Transport Phenomena. 5, 2014, p. 201 - 214 [Nanofluid, nanoparticles, microscale channel, nucleate boiling, flow boiling, two phase flow, CHF, heat transfer, flow regime, mechanism, prediction method].

  • Lei Liu and Lixin Cheng: Effect of a Polymeric Additive on Non-boiling Heat Transfer and Pressure Drop of Upward Gas-Liquid Two Phase Flow in a Vertical Smooth Tube. In: International Journal of Microscale and Nanoscale Thermal & Fluid Transport Phenomena. 5, 2014, p. 233 - 255 [Experiment, gas-liquid, two-phase flow, upward flow, non-boiling, drag reduction, additive, polyscrylamide (PAM), gas liquid, air water, heat transfer, pressure drop, friction, effect].

  • Lixin Cheng: Editorial: Great Achievement to the Field of Microscale and Nanoscale Thermal & Fluid Sciences over the Past Five Years and Future Development. In: Int. J. Micoscale and Nanoscale Thermal and Fluid Transport Phenomena. 5, 2014, p. 149 - 150.

  • Lixin Cheng, Qincheng Bi, Huixiong Li, Haijun Wang, Frank Z.H. Yang and Tom X. Chen : In Celebration of Professor Ting-Kuan Chen on His 80th Birthday. In: International Journal of Micoscale Nanoscale Thermal & Fluid Transport Phenomena. 5, 2014, p. 151 - 153.

  • Lixin Cheng: Nanofluid Two Phase Flow and Heat Transfer. In: Heat Transfer Enhancement with Nanofluids. (Ed. Vincenzo Bianco, Oronzio Manca, Sergio Nardini and Kambiz Vafai) USA: CRC-Taylor and Francis, 2015, p. 365 - 388 [Nanofluid, nucleate boiling, flow boiling, two phase flow, CHF, heat transfer, nanoparticle, mechanism, prediction methods].

  • Lixin Cheng: Progress in Microscale and Nanoscale Thermal and Fluid Sciences. New York, USA: Nova Science Publishers, 2015, 289 pp.

Friedmann, Dr. Donia

University of New South Wales, Australia
Field of research: Process engineering
Host: Prof. Dr. Detlef Bahnemann Gottfried Wilhelm Leibniz Universität Hannover
  • Donia Friedmann, Heinrich Hansing, Detlef Bahnemann: Primary Processes During the Photodeposition of Ag Clusters on TiO2 Nanoparticles. In: Zeitschrift für Physikalische Chemie. 221, 2007, p. 329 - 348 [Silver Clusters, Titanium Dioxide, Photodeposition. Laser Flash Photolysis].

  • Donia Friedmann, Amer Hakki, Hyejin Kim, Wonyong Choi, Detlef Bahnemann: Heterogeneous photocatalytic organic synthesis: state-of-the-art and future perspectives. In: Green Chemistry . 20, 2016, p. 5391 - 5411 [organic synthesis, green chemistry, photocatalysis].

  • Donia Friedmann, Cecilia Mendive, Detlef Bahnemann: TiO2 for water treatment: Parameters affecting the kinetics and mechanisms of photocatalysis. In: Applied Catalysis B: Environmental. 99, 2010, p. 398 - 406 [photocatalysis, titanium dioxide, kinetics, modelling].

  • Víctor M. Menéndez-Flores, Donia Friedmann, Detlef W. Bahnemann : Durability of Ag-TiO2 Photocatalysts Assessed for the Degradation of Dichloroacetic Acid. In: International Journal of Photoenergy. 2008, 2008, p. Article ID 280513 [photocatalysis, silver doping, photocatalyst recycling].

Fritz, Dr. Wilfred Leslie Owen

Cape Peninsula University of Technology, Germany
Field of research: Energy engineering, energy technology, power engineering
Host: Prof. Dr. Krzysztof Rudion Universität Stuttgart
  • Dr. Wilfred Leslie Owen Fritz: PSIM simulations of a dc SQUID magnetometer. In: Journal of Engineering, Design and Technology. . 13, 2015, p. 298 - 314 [superconducting quantum interference device PSIM power electronics and motor control simulation package].

  • Dr. Wilfred Leslie Owen Fritz: Tying small renewable energy systems to the grid in South Africa. In: In: Energize – The independent power and energy journal of Southern Africa.. July, 2013, p. 62 - 64 [feed-in tariffs power quality stability of the grid].

  • Dr. Wilfred Leslie Owen Fritz: How new technologies, standards influence RE applications. In: In: Vector Journal of the Institution of Certificated Mechanical and Electrical Engineers. . February, 2012, p. 64 - 67 [anti-islanding inverter IEEE 929-200 standard power quality of the grid].

Guan, Prof. Dr. Guoqing

Hirosaki University, Japan
Field of research: Chemical process engineering
Host: Dr. Gunther Kolb Institut für Mikrotechnik Mainz GmbH
  • Guoqing Guan, Ralf Zapf, Gunther Kolb,Yong Men, Volker Hessel, Holger Löwe, Jianhui Ye, and Rudolf Zentel: Low temperature catalytic combustion of propane over Pt-based catalyst with inverse opal microstructure in microchannel reactor . In: Chemical Communications. 2007, p. 260 - 262 [catalysis; inverse opals; propane combustion].

  • Guoqing Guan,Katsuki Kusakabe, Nozomi Sakurai, Kimiko Moriyama: Rapid synthesis of biodiesel at room temperature in the presence of dimethyl ether. In: Chemistry Letters. 36(12), 2007, p. 1048 - 1049 [Biodiesel; DME; catalyst].

  • Guoqing Guan,Katsuki Kusakabe, Haruka Ozono, Masatsugu Taneda, Masato Uehara, and Hideaki Maeda: Preparation of Carbon Microparticle Assemblies from Phenolic Resin Using Inverse Opal Templating Method. In: Journal of Materials Science. 42(24), 2007, p. 10196 - 10202 [Opal; inverse opal; carbon; microparticles].

  • Guoqing Guan,Ralf Zapf, Gunther Kolb, Volker Hessel, Holger Löwe, Yong Men, Jianhui Ye, and Rudolf Zentel: Preferential CO Oxidation over Catalysts with Well-defined Inverse Opal Structure in Microchannels. In: International Journal of Hydrogen Energy. 33(2), 2008, p. 797 - 801 [Prox; inverse opal; microreactor].

  • Guoqing Guan;Katsuki Kusakabe, Haruka Ozono, Masatsugu Taneda, Masato Uehara, and Hideaki Maeda: Fabrication and Structure Analysis of Three-Dimensionally Well-Ordered Arrangements of Silicon Oxycarbide Microparticles. In: Chemical Engineering Journal. 135(3), 2008, p. 232 - 237 [Silicon oxycarbide; microparticle; inverse opal].

  • Guoqing Guan,Katsuki Kusakabe, Nozomi Sakurai, Kimiko Moriyama: Transesterification of sunflower oil with methanol in a microtube reactor. In: Industrial & Engineering Chemistry Research. 48, 2009, p. 1357 - 1363 [Biodiesel; Microreactor; flow patterns].

  • Guoqing Guan, Nozomi Sakurai, Katsuki Kusakabe: Synthesis of biodiesel from sunflower oil at room temperature in the presence of various cosolvents . In: Chemical Engineering Journal. 146, 2009, p. 302 - 306 [Biodiesel, cosolvents, microreactor].

  • Guoqing Guan, Katsuki Kusakabe, Nozomi Sakurai, Kimiko Moriyama : Transesterification of vegetable oil to biodiesel fuel using acid catalysts in the presence of dimethyl ether . In: Fuel. 88, 2009, p. 81 - 86 [Biodiesel, acid catalyst, DME].

  • Guoqing Guan, Katsuki Kusakabe, Masatsugu Taneda, Masato Uehara, Hideaki Maeda : Catalytic combustion of methane over Pd-based catalyst supported on a macroporous alumina layer in a microchannel reactor . In: Chemical Engineering Journal. 144, 2008, p. 270 - 276 [Catalytic combustion, methane, inverse opal].

  • Guoqing Guan Katsuki Kusakabe Satoko Yamasaki: Tripotassium phosphate as a solid catalyst for biodiesel production from waste cooking oil. In: Fuel Processing Technology. 90, 2009, p. 520 - 524 [Tripotassium phosphate solid catalyst biodiesel].

  • Guoqing Guan Katsuki Kusakabe: Synthesis of biodiesel using an electrolysis method. In: Chemical Engineering Journal. 153, 2009, p. 159 - 163 [Biodiesel electrolysis method].

  • Guoqing Guan; Marion Teshima; Chie Sato; Sung Mo Son; Muhammad Faisal Irfan; Katsuki Kusakabe; Norihiro Ikeda; Tsao-Jin Lin: Two-phase flow behavior in microtube reactors during biodiesel production from waste cooking oil. In: AIChE J. 56, 2010, p. 1383 - 1390 [Biodiesel, microreactor, two-phase].

  • Guoqing Guan; Chihiro Fushimi; Atsushi Tsutsumi: Prediction of the flow behavior of the riser in a novel high solids flux circulating fluidized beds for steam gasification of coal or biomass. In: Chemical Engineering Journal . 164, 2010, p. 221 - 229 [Circulating Fluidized Bed; Riser; Pressure Balance].

  • Guoqing Guan,C. Fushimi, M. Ishizuka, Y. Nakamura, A. Tsutsumi, S. Matsuda, Y. Suzuki, H. Hatano, Y. Cheng, E. W. C. Lim, C.-H.Wang: Flow behaviors in the downer of a large-scale triple-bed combined circulating fluidized bed system with high solids mass fluxes. In: Chemical Engineering Science. 66, 2011, p. 4212 - 4220 [Circulating fluidized bed; downer; flow behavior].

  • G. Chen, Guoqing Guan, S. Abliz, Y. Kasai, A. Abuliti,: Rapid degradation mechanism of Ni-CGO anode in low concentrations of H2 at a high current density. In: International Journal of Hydrogen Energy. 36, 2011, p. 8461 - 8467 [SOFC, anode, degradation].

  • G. Chen, Guoqing Guan, Y. Kasai, H. You,A. Abuliti: Degradation mechanism of Ni-based anode in low-concentration of methane. In: Journal of Power Sources. 196, 2011, p. 6022 - 6028 [SOFC, anode, methane, mechanism].

  • C. Fushimi, Guoqing Guan, Y. Nakamura, M. Ishizuka, A. Tsutsumi, S. Matsuda, H. Hatano, Y. Suzuki: Hydrodynamic characteristics of a large-scale triple-bed combined circulating fluidized bed. In: Powder Technology. 209, 2011, p. 1 - 8 [Circulating fluidized bed, Hydrodynamic].

  • Guoqing Guan, C. Fushimi, A. Tsutsumi, M. Ishizuka, S. Matsuda, H. Hatano, Y. Suzuki: High-density circulating fluidized bed gasifier for advanced IGCC/IGFC- Advantages and challenges. In: Particuology. 8, 2010, p. 602 - 606 [Circulating fluidized bed, gasifier, high-density].

  • S. Son, K. Kusakabe, Guoqing Guan: Biodiesel synthesis and properties from sunflower and waste cooking oils using CaO catalyst under reflux conditions. In: Journal of Applied Sciences. 10, 2010, p. 3191 - 3198 [Biodiesel, CaO].

  • Suchada Sirisomboonchai, Maidinamu Abuduwayiti, Guoqing Guan*, Chanatip Samart, Shawket Abliz, Xiaogang Hao, Katsuki Kusakabe, Abuliti Abudula: Biodiesel production from waste cooking oil using calcined scallop shell as catalyst. In: Energy Conversion and Management. 95, 2015, p. 242 - 247.

Guo, Prof. Dr. Yuebin

University of Alabama, United States of America
Field of research: Manufacturing engineering, production engineering
Host: Prof. Dr. Fritz Klocke Rheinisch-Westfälische Technische Hochschule Aachen
  • A. Klink, Y.B. Guo, F. Klocke: Surface Integrity Evolution of Powder Metallurgical Tool Steel by Main Cut and Finishing Trim Cuts in Wire-EDM. In: Procedia Engineering. 19, 2011, p. 178 - 183 [Surface integrity; Wire EDM; Finishing; Rim zone].

  • Y.B. Guo, A. Klink, F. Klocke: Multiscale modeling of sinking-EDM with Gaussian heat flux via user subroutine. In: Procedia CIRP. 6, 2013, p. 439 - 444 [EDM; gap phenomena; heat flux; multiscale modeling].

  • Y.B. Guo, A. Klink, C. Fu, J. Snydera: Machinability and surface integrity of Nitinol shape memory alloy. In: CIRP Annals - Manufacturing Technology. 62/1, 2013, p. 83 - 86 [Machinability, surface integrity, shape memory alloy].

Ionescu, Prof. Dr. Florin

Steinbeis-Transferzentrum Maschinendynamik, Ölhydraulik und Pneumatik, Germany
Field of research: Manufacturing engineering, production engineering
Host: Prof. Dr. Wolfgang Backe Rheinisch-Westfälische Technische Hochschule Aachen
  • Florin Ionescu, Florin Stratulat: Linear Control Systems Analysis and Synthesis - Theory and Applications. Stuttgart/Berlin: Steinbeis-Edition, 2009, 642 pp.

  • Florin Ionescu, Dumitru Popescu, Radu Dobrescu, Dan Stefanoiu: Modelare in ingineria proceselor industriale. Bukarest: Editura AGIR, 2011, 184 pp.

Islam, Prof. Dr. Md. Akhtarul

Shahjalal University of Science and Technology, Bangladesh
Field of research: Process engineering
Host: Prof. Dr. Mathias Ulbricht Universität Duisburg-Essen
  • Uddin M. T., Mozumder M. S. I, Figoli A, Islam M. A. and Drioli E : Arsenic Removal by Conventional and Membrane Technology: An Overview. In: Indian J Chem Technol.. 14, 2007, p. 441 - 450.

  • Islam M. A., Mozumder M. S. I. and Uddin M. T. : MBR- a Promising Technology for Wastewater Treatment: An Overview. In: Indian J Chem Technol.. 5, 2008.

  • Md. Akhtarul Islam, M. S. A. Amin, J. Hoinkis: Optimal design of an activated sludge plant: theoretical analysis. In: Applied Water Science. 10.1007, 2013, p. 13201 [activated sludge reactor - Optimal design - Settling tank].

  • Md. Akhtarul Islam, M. S. A. Amin, J. Hoinkis: Optimal design of an activated sludge plant: theoretical analysis. In: Applied Water Science. 10.1007, 2013, p. 13201 [Activated sludge reactor - Optimal design - Settling tank].

Islam, Prof. Dr.-Ing. Rafiqul

University of Dhaka, Bangladesh
Field of research: Energy engineering, energy technology, power engineering
Host: Prof. Dr. Jan Hoinkis Hochschule Karlsruhe - Technik und Wirtschaft
  • Rafiqul Islam, Anwar Zahid, M. Qumrul Hassan, Quazi Abdus Samad, M. Salim Khan, Rojibul Haque: Impact of Climate Change on Socio-economic Conditions of Bangladesh. Bangladesh: Alumni Association of German Universities in Bangladesh, 2013, 274 pp.

Karimi-Nasab, Dr. Mehdi

Kharazmi University, Germany
Field of research: Production planning production control
Host: Prof. Dr. Wolfgang Brüggemann Universität Hamburg
  • S. Dowlatshahi, M. Karimi-Nasab, H. Bahrololum: A group decision-making approach for supplier selection in configuration design: A case study. In: International Journal of Advanced Manufacturing Technology. 81, 2015, p. 1139 - 1154.

  • M. Karimi-Nasab, M. Modarres: Lot sizing and job shop scheduling with compressible process times: A cut and branch approach. In: Computers & Industrial Engineering. 85, 2015, p. 196 - 205.

  • M. Karimi-Nasab, M., Modarres, S.M., Seyedhoseini: A self-adaptive PSO for joint lot sizing and job shop scheduling with compressible process times. In: Applied Soft Computing. 27, 2015, p. 137 - 147.

  • M. Karimi-Nasab, H.M. Wee: An inventory model with truncated exponential replenishment intervals and special sale offer. In: Journal of Manufacturing Systems. 35, 2015, p. 246 - 250.

  • O. Kheirandish, R. Tavakkoli-Moghaddam, M. Karimi-Nasab: An artificial bee colony algorithm for a two-stage hybrid flowshop scheduling problem with multilevel product structures and requirement operations. In: International Journal of Computer Integrated Manufacturing. 28, 2015, p. 437 - 450.

  • M. Karimi-Nasab, S.M. Seyedhoseini: Multi-level lot sizing and job shop scheduling with compressible process times: A cutting plane approach. In: European Journal of Operational Research. 231, 2013, p. 598 - 616.

  • M. Karimi-Nasab, K. Sabri-Laghaie: Developing approximate algorithms for EPQ problem with process compressibility and random error in production / inspection. In: International Journal of Production Research. 52, 2013, p. 2388 - 2421.

  • M. Karimi-Nasab, S.M. Seyedhoseini, M. Modarres, M. Heidari: Multi-period lot sizing and job shop scheduling with compressible process times for multi-level product structures. In: International Journal of Production Research. 51, 2013, p. 6229 - 6246.

  • M. Karimi-Nasab, S. Dowlatshahi, H. Heidari: A multi-objective distribution-pricing model for multi-period price-sensitive demands. In: IEEE Transactions on Engineering Management. 60, 2013, p. 640 - 654.

  • M. Karimi-Nasab, I. Konstantaras: An inventory control model with stochastic review interval and special sale offer. In: European Journal of Operational Research. 227, 2013, p. 81 - 87.

  • M. Karimi-Nasab, S.M.T. Fatemi Ghomi: Multi-objective production scheduling with controllable processing times and sequence-dependent setups for deteriorating items. In: International Journal of Production Research. 50, 2012, p. 7378 - 7400.

  • E. Noorollahi, M. Karimi-Nasab, M.B. Aryanezhad: An economic production quantity model with random yield subject to process compressibility. In: Mathematical and Computer Modelling. 56, 2012, p. 80 - 96.

  • M. Karimi-Nasab, I. Konstantaras: A random search heuristic for a multiple-objective production planning. In: Computers & Industrial Engineering. 62, 2012, p. 479 - 490.

  • M. Karimi-Nasab, M.B. Aryanezhad: A multi-objective production smoothing model with compressible operating times. In: Applied Mathematical Modelling. 35, 2011, p. 3596 - 3610.

  • M.B. Aryanezhad, H. Sahebi, M. Karimi-Nasab: A JIT discount inventory model for multi-stage supply chain. In: Kuwait Journal of Science and Engineering. 37, 2010, p. 225 - 250.

Kawajiri, Dr. Yoshiaki

Nagoya University, Japan
Field of research: Chemical process engineering
Host: Prof. Dr. Andreas Seidel-Morgenstern Max-Planck-Institut für Dynamik komplexer technischer Systeme
  • Bentley, J.; Huang, Q.; Kawajiri, Y.; Eic, M. & Seidel-Morgenstern, A.: Optimizing the separation of gaseous enantiomers by simulated moving bed and pressure swing adsorption. In: Adsorption. 17, 2011, p. 159 - 170 [Chromatography, optimization, simulated moving bed, pressure swing adsorption, dynamic optimization].

  • Li, S.; Kawajiri, Y.; Raisch, J. & Seidel-Morgenstern, A.: Optimal startup operation of simulated moving bed chromatographic processes (in press). In: Proceedings of the 9th International Symposium on Dynamics and Control of Process Systems (DYCOPS 2010). 2010, p. 725 - 730 [Chromatography, simulated moving bed, dynamic optimization].

  • Li, S.; Kawajiri, Y.; Raisch, J. & Seidel-Morgenstern, A.: Optimization of simulated moving bed chromatography with fractionation and feedback: Part I. Fractionation of one outlet. In: Journal of Chromatography A. 1217, 2010, p. 5337 - 5348 [Chromatography, simulated moving bed, dynamic optimization].

  • Li, S.; Kawajiri, Y.; Raisch, J. & Seidel-Morgenstern, A.: Optimization of simulated moving bed chromatography with fractionation and feedback: Part II. Fractionation of both outlets. In: Journal of Chromatography A,. 1217, 2010, p. 5349 - 5357 [Chromatography, simulated moving bed, dynamic optimization].

Khajeh Pour, Hossein

Sharif University of Technology, Germany
Field of research: Energy management, power economy
Host: Prof. Dr. George Tsatsaronis Technische Universität Berlin
  • Hossein Khajehpour, Mohammad Ali Ahmady, Seyyed Ali Hosseini, Ali N. Mashayekhi & Abbas Maleki: Environmental policy-making for Persian Gulf oil pollution:A future study based on system dynamics modeling. In: Energy Sources, Part B: Economics, Planning, and Policy. 12.1, 2017, p. 17 - 23 [Environmental penalty; oil production; Persian gulf; pollution; system dynamics].

  • Hossein Khajehpour, Yadollah Saboohi, George Tsatsaronis: Permissible Emission Limit Estimation via Iterative Back-Calculation: Case of Assaluyeh Energy Zone, Southern Iran. In: Integrated Environmental Assessment and Management. 2017, [Air Pollution, Environmental Standard, Permissible Emission, PM10, Energy Systems.].

  • Hossein Khajehpour, Yadollah Saboohi, George Tsatsaronis: Environmental responsibility accounting in complex energy systems . In: Journal of Cleaner Production. 166, 2017, p. 998 - 1009 [Environment, Responsibility, Exergy cost, Exergoenvironmental analysis, Energy systems].

Khujanov, M.Sc. Ravshanjon

Uzbekistan Academy of Sciences, Uzbekistan
Field of research: Solar energy utilisation
Host: Prof. Dr. Uwe Gampe Technische Universität Dresden
  • Ravshanjon Khujanov, Shavkat Nurmatov: Use of Solar Power Plants in Uzbekistan with thermal Storage Technologies. In: 5th International Conference on European Science and Technology. 1, 2013, p. 420 - 422 [solar energy, energy storage, solar power plants, selected sites].

  • Ravshanjon Khujanov, Anvar Anarbaev: Status and Development of Solar Heating in Uzbekistan. In: International Conference Micro Perspectives for Decentralized Energy Supply. 2013.

  • Anvar Anarbaev, Ravshanjon Khujanov, Utepova A: The decision of the ecological safety questions in heat power engineering on the basis of solar-fuel technologies. In: ISES Solar World Congress 2011. 2011.

  • Nurmatov, Sh., Klichev, Sh., Abdurakhmanov, A., Bakhramov, A. and Khujanov, R.: Stacking facet in compound paraboloidal concentrators. In: Materials of the international conference "Fundamental and applied questions of physics”. 2010, p. 112 - 114.

  • Klichev, Sh., Abdurakhmanov, A., Bakhramov, A., Nurmatov, Sh., Khujanov, R. and Klichev, Z.: Faceted concentrator’s single-dish solar furnaces. In: Materials of the international conference "Fundamental and applied questions of physics”. 2010, p. 110 - 112.

  • Khujanov, R. and Anarbaev, A.: Prospects of solar-fuel technologies in Uzbekistan. In: EuroSun 2010, International Conference on Solar Heating, Cooling and Buildings. 2010.

  • Paizullakhanov, M., Nurmatov, Sh. and Khujanov, R. : Carbide Materials Obtained by Solar Energy. In: Solar Engineering. 2010, p. 5 - 7.

  • Klichev, Sh., Zakhidov, R., Bakhramov, S., Khujanov, R. and Klichev, Z.: Concentration of the linear Fresnel mirror with orientable bevel on the stationary receiver. In: Solar Engineering. 3, 2010, p. 68 - 72.

  • Ravshanjon Khujanov: Nutzung von Hochtemperatur-Solarwärme zur Elektroenergieerzeugung in Usbekistan. In: SONNENENERGIE. 5, 2010.

  • Khujanov, R., Zakhidov, R. und Bobakhodjaev, R. : Inhalt und Grundsätze der Thermoflow Programme zur Optimierung thermischer Kraftwerke. In: Energie-und Ressourceneffizienz. 2010.

  • Klychev Sh.I., Zakhidov R. A., Khujanov R., Klychev Z.Sh., Mukhtarov F., Aminov Z., Orlov S.A., Turgunov F. : Modelling and calculation of Power characteristics linear concentrators of sunlight. In: Heliotechnics. 4, 2012, p. 47 - 54.

  • Babakhodjaev, R., Khujanov, R., Sharipov, A., Turgunov, F., Eshkuvvatov L. (2012): Development of the scheme of using solar energy at thermal stations for heating of network water. In: Modern Science. Collection of Research Papers . 3, 2012, p. 11 - 14.

  • Klychev Sh.I., Zakhidov R. A., Khujanov R., Klychev Z.Sh., Mukhtarov F., Aminov Z., Orlov S.A., Turgunov F.: Thermal Characteristics of Tubular Receivers of Solar Radiation Line Concentrators. In: Applied Solar Energy. 49, 2013, p. 235 - 240.

  • Khujanov, R., Heide, S. und Gampe U : Untersuchungen zum solaren Repowering fossiler Dampfkraftwerke am Beispiel Usbekistans. In: 45.Kraftwerkstechnisches Kolloquium . 2013.

  • Khujanov, R., Heide, S., Gampe U. : Research for solar repowering the example of the power plant Syrdarya. In: International Conference «Fundamental and Applied Problems of Physics» devoted to 70th anniversary of Physical-Technical Institute, Scientific Production Association “Physics-Sun” of Academy of Sciences of Uzbekistan. 2013.

  • Babakhodjaev R., Eshkuvvatov L., Turgunov, F. R., Sharipov, A., Khujanov, R.: The preliminary analysis of expediency of heating up of natural gas by solar energy on Syrdarya thermal power plant. In: Conference with international participation. «VIII all schools workshop for thermophysics and energy". . 2013.

  • Khujanov, R.; Gampe U.; Nurmatov Sh: Reduction of carbon dioxide emissions by solar thermal couplung into existing fossil steam power plants with thermal energy storage integration. In: Proceedings of 2nd Humboldt Kolleg in Conjunction with International Conference on Natural Sciences 2014, NATURAL SCIENCES: from Laboratory Research to Industrial Applications. 2, 2014, [CO2 emission, solar energy, fossil fuel, thermal power plant, solar repowering].

  • Khujanov, R.; Gampe U.; Nurmatov Sh: Reducing of carbon dioxide emissions and comparisons between fossil fuel and solar energy resources for electricity generation. In: 2015 International Conference on Ecology, Environment & Energy (3E). 3, 2015, [solar repowering, rankine cycle, thermal storage].

Koshy, Prof. Dr. Philip

McMaster University, Canada
Field of research: Manufacturing engineering, production engineering
Host: Prof. Dr. Fritz Klocke Rheinisch-Westfälische Technische Hochschule Aachen
  • D. Grandy, P. Koshy, F. Klocke: Pneumatic non-contact roughness assessment of moving surfaces. In: CIRP Annals. 58, 2009, p. 515 - 518 [metrology, surface, monitoring].

  • N.Z. Yussefian, P. Koshy, S. Buchholz, F. Klocke: Electro-erosion edge honing of cutting tools. In: CIRP Annals. 59, 2010, p. 215 - 218 [machining, cutting tool, manufacturing].

  • P. Koshy, D. Grandy, F. Klocke: Pneumatic non-contact topography characterization of finish-ground surfaces using multivariate projection methods. In: Precision Engineering. 35, 2010, p. 282 - 288.

  • R. Babel, P. Koshy, M. Weiss: Acoustic emission spikes at workpiece edges in grinding: Origin and applications. In: International Journal of Machine Tools and Manufacture. 64, 2013, p. 96 - 101 [Acoustic emission; Burr formation; Contact length; Grinding burn; Process monitoring].

  • A Klink, M Holsten, S Schneider, P Koshy: Acoustic emission signatures of electrical discharge machining. In: CIRP Annals - Manufacturing Technology. 65, 2016, p. 229 - 232.

Kumar, Dr. Jitendra

Indian Institute of Technology (IIT) Kharagpur, India
Field of research: Chemical process engineering
Host: Prof. Dr. Andreas Bück Friedrich-Alexander-Universität Erlangen-Nürnberg
  • Mubashir Hussain, Jitendra Kumar, Mirko Peglow, Evangelos Tsotsas: MODELING SPRAY FLUIDIZED BED AGGREGATION KINETICS ON THE BASIS OF MONTE-CARLO SIMULATION RESULTS. In: Chemical Engineering Science. 2013, [Mathematical modeling; Population balance; Kinetics; Simulation; Spray fluidized bed; Monte-Carlo].

  • Mubashir Hussain,Jitendra Kumar, Evangelos Tsotsas : Modeling Aggregation Kinetics of Fluidized Bed Spray Agglomeration for Porous Particles. In: Powder Technology . 270, 2015, p. 584 - 591 [Population balances; Kinetics; Aggregation; Monte-Carlo; Fluidized bed].

  • Mubashir Hussain,Jitendra Kumar, Evangelos Tsotsas: A New Framework for Population Balance Modeling of Spray Fluidized Bed Agglomeration. In: Particuology. 19, 2015, p. 141 - 154 [Population balances; Kinetics; Aggregation; Monte Carlo simulation; Fluidized bed; Modeling].

  • Mubashir Hussain, Jitendra Kumar, Mirko Peglow, Evangelos Tsotsa: On two-compartment population balance modeling of spray fluidized bed agglomeration. In: Computers and Chemical Engineering. 61, 2014, p. 185 - 202 [Aggregation, Two compartment modelling ].

  • Mubashir Hussain,Jitendra Kumar, Evangelos Tsotsas: Modeling of aggregation kernel using Monte Carlo simulations of spray fluidized bed agglomeration. In: American Institute of Chemical Engineers (AIChE) Journal . 60, 2014, p. 855 - 868 [Monte Carlo Simulations, Aggregation ].

Kyosev, Prof. Dr.-Ing. Yordan Kostadinov

Hochschule Niederrhein, Abteilung Mönchengladbach, Germany
Field of research: Textile engineering
Host: Prof. Dr. Thomas Gries Rheinisch-Westfälische Technische Hochschule Aachen
  • Yordan Kostadinov Kyosev: Modelling and visualization of knitted fabrics. In: Modelling and predicting textile behaviour. (Ed. Xiaogang Chen) Cambridge: Woodhead Publishing, 2009, [modelling, knitted structures].

Levchenko, Prof. Dr. Sergei

National Academy of Sciences of Belarus, Belarus
Field of research: Energy management, power economy
Host: Prof. Dr. Alfred Voß Universität Stuttgart
  • Sergei Levchenko, Anatoli Yakusau: Planning of the energy systems development. Minsk: Belorusskaja Nauka, 2007, 292 pp. [Energy analysis and planning, systems analysis, modeling, scenarious].

  • Prof. Dr. Sergei Levchenko: Modeling of energy systems at the deregulating conditions. In: Integrating science and technology for sustainable energy development as basis for secure future - SSF-2010, Minsk, 3 – 6 June. 2010, p. 62 [energy system, systainable energy development].

  • Prof. Dr. Sergei Levchenko: Smart energy grids – an effective technology for energy conservation. In: Energy strategy. 2, 2012, p. 46 - 49 [smart energy grid, energy efficiency].

  • Prof. Dr. Sergei Levchenko: From Smart energy grids to Smart Cities. In: Energy strategy. 6, 2012, p. 23 - 27 [smart city, smart energy grid.].

  • Prof. Dr. Sergei Levchenko, Zorina T.G., Nikitin S.N. : Technology platforms: experience of Russia and EU and perspectives of its development in Belarus. In: Gosudarstvennaya Sluzhba (Public Administration). 6, 2013, p. 90 - 93 [Technology platform, energy efficiency].

  • Prof. Dr. Sergei Levchenko, Pluyta S.V. : Smart grids concept for sustainable development of Belarus energy system. In: Proceedings of the National academy of sciences of Belarus. 3, 2014, p. 91 - 97 [sustainable development, energy system, smart grid].

Liu, Dr. Haitao

Nanjing Research Institute of Simulation Technology, People's Republic of China
Field of research: Automated production, automatic production, robots
Host: Prof. Dr. Andres G. Kecskemethy Universität Duisburg-Essen
  • Haitao Liu, Tian Huang, Andrés Kecskeméthy, Derek G. Chetwynd: A generalized approach for computing the transmission index of parallel mechanisms. In: Mechanism and Machine Theory. 74, 2014, p. 245 - 256 [Virtual coefficient, Transmission index, Parallel mechanisms].

Luo, Dr. Yan

, United States of America
Field of research: Manufacturing engineering, production engineering
Host: Prof. Dr. Eberhard Abele Technische Universität Darmstadt
  • Yan Luo: An algorithm architecture for tool wear of HSC. In: International Journal of Computer Applications in Technology. 28, 2007, p. 86 - 82 [algorithm, HSC, manufacturing ].

Mao, Dr. Qing

Chinese Academy of Sciences, People's Republic of China
Field of research: Electrical energy / power engineering
Host: Prof. Dr. Ulrike Krewer Max-Planck-Institut für Dynamik komplexer technischer Systeme
  • Qing Mao, Ulrike Krewer, Richard Hanke-Rauschenbacha: Total Harmonic Distortion Analysis for Direct Methanol Fuel cell Anode. In: Electrochemistry Communications. 12, 2010, p. 1517 - 1519 [methanol concentration, DMFC, nonlinear behavior, total harmonic distortion (THD) analysis].

Martin, Dr. Angel

Universidad de Valladolid, Spain
Field of research: Chemical process engineering
Host: Prof. Dr. Eckhard Weidner Ruhr-Universität Bochum
  • Angel Martin, Katharine Scholle, Facundo Mattea, Darja Meterc, María José Cocero: Production of polymorphs of ibuprofen sodium by supercritical antisolvent (SAS) precipitation. In: Advanced Drug Delivery Reviews. 9(5), 2009, p. 2504 - 2511 [supercritical carbon dioxide, polymorphism, micronization, non-steroidal anti-inflammatory drug, dsc, pxrd].

  • Angel Martin, Huu Minh Pham, Andreas Kilzer, Sabine Kareth, Eckhard Weidner: Phase equilibria of carbon dioxide + poly ethylene glycol + water mixtures at high pressure: Measurements and modelling. In: Fluid Phase Equilibria. 286, 2009, p. 50 - 57 [Supercritical carbon dioxide Particles from Gas Saturated Solutions PGSS-drying PC-SAFT equation of state].

  • Angel Martin, David Méndez, María Dolores Bermejo: Application of a group contribution equation of state for the thermodynamic modeling of binary systems (gas + ionic liquids) with bis[(trifluoromethyl)sulfonyl]imide anion. In: The Journal of Chemical Thermodynamics. 42, 2010, p. 524 - 529 [Ionic liquid Carbon dioxide Oxygen Sulphur dioxide Phase behavior Group contribution equation of state].

Miccio, Dr. Francesco

Consiglio Nazionale delle Ricerche (CNR), Italy
Field of research: Thermal process engineering
Host: Prof. Dr. Hartmut Spliethoff Universität Stuttgart
  • F. Miccio, B. Piriou, G. Ruoppolo, R.Chirone: BIOMASS GASIFICATION IN A CATALYTIC FLUIDIZED REACTOR WITH BEDS OF DIFFERENT MATERIALS. In: Chemical Engineering Journal . 154, 2009, p. 369 - 374 [Fluidized bed, gasification, biomass].

  • F. Miccio, A. Natali Murri, E. Landi : SYNTHESIS AND CHARACTERIZATION OF GEOPOLYMER OXYGEN CARRIERS FOR CHEMICAL LOOPING COMBUSTION . In: Applied Energy. 194, 2017, p. 136 - 147 [Chemical Looping Combustion, CO2].

  • M. Miccio, F. Miccio: CONVERSION OF LIQUID AND GASEOUS FUELS IN FLUIDIZED BED COMBUSTION AND GASIFICATION . In: Fluidized bed technologies for near-zero emission combustion and gasification. (Ed. F. Scala) Woodhead Publishing Limited , 2013, [Fluidized bed, liquid fuels].

Mohammed, Prof. Dr.-Ing. Laith Abdullah

Ajman University College of Science and Technology, United Arab Emirates
Field of research: Computer-aided production
Host: Prof. Dr. Jürgen Bast Technische Universität Bergakademie Freiberg
  • Laith Abdullah Mohammed, A. Kadauw, J. Bast: Computer Aided Engineering for Metal Die Casting Process. In: Freiberger Forschungshefte. A899b, 2009, p. 14 - 47 [Metal Die Casting, CAD/CAM].

  • Laith Abdullah Mohammed, Abbas M, Maan Aabid: Studying Curve Interpolator for CNC System. In: Eng.& Tech. Journal. 27, 2009, p. 2205 - 2222 [Curve Interpolator, CNC, CAD/CAM].

Mohanty, Prof. Dr. Swati

CSIR-Institute of Minerals and Materials Technology (IMMT), India
Field of research: Chemical process engineering
Host: Prof. Dr. Stefan Heinrich Technische Universität Hamburg-Harburg
  • Tobias Baier, Swati Mohanty, Klaus S. Drese, Federica Rampf, Jungtae Kim, Friedhelm Schoenfeld: Modelling immunomagnetic cell capture in CFD. In: Microfluidics and Nanofluidics. 7, 2009, p. 205 - 216 [Magnetophoresis, Cell sorting, Computational fluid dynamics (CFD)].

  • Swati Mohanty, Tobias Baier, Friedhelm Schoenfeld: CFD Modelling of cell capture in BioMEMs. In: World Congress on Engineering and Computer Science 2008 Proceedings. (Ed. S.I. Ao, Craig Douglas, W.S. Grundfest, Lee Schruben , Jon Burgstone) Hong Kong: Newswood Limited, 2008, p. 68 - 73 [BioMEMs, cell capture, CFD, magnetophoresis].

  • Swati Mohanty, Tobias Baier, Friedhelm Schönfeld: Three dimensional CFD modelling of immunomagnetophoretic cell capture in BioMEMs. In: Biochemical Engineering Journal. 51, 2010, p. 110 - 116 [Keywords: BioMEMs, Cell capture, CFD, Magnetophoresis, Magnetic beads Continuous sorting].

  • Simon Bogner, Swati Mohanty, Ulrich Ruede: Drag correlation for dilute and moderately dense fluid-particle systems using Lattice Boltzmann Method. In: International Journal of Multiphase Flow. 68, 2015, p. 71 - 79 [Lattice Boltzmann method, Drag force correlation, Dilute system, Particle beds, Particle-resolved numerical simulation.].

Morozyuk, Prof. Dr. Tetyana

Odessa State Academy of Refrigeration, Germany
Field of research: Heat / thermal engineering and technology, thermodynamics
Host: Prof. Dr. George Tsatsaronis Technische Universität Berlin
  • Tetyana Morozyuk (Morosuk): Structural and Parametric Optimization of an Absorption Refrigeration Machine: Inverse Rectification as Auxiliary Absorption Process. In: Diffusion in Solids and Liquids. 258-260, 2007, p. 219 - 224 [inverse rectificator, absorption process, absorption machine, exergy analysis].

Nijdam, Prof. Dr. Justin J.

University of Canterbury, New Zealand
Field of research: Chemical process engineering
Host: Prof. Dr. Matthias Kind Karlsruher Institut für Technologie (KIT)
  • Justin Nijdam, Alexander Ibach, Klaus Eichhorn, Matthias Kind: An X-ray diffraction analysis of crystallised whey and whey-permeate powders. In: Carbohydrate Research. 342, 2007, p. 2354 - 2364 [Whey; Lactose; Crystallisation; Amorphous; Caking].

Porada, Dr. Slawomir

University of Twente, Netherlands
Field of research: Chemical process engineering
Host: Prof. Dr. Volker Presser Leibniz-Institut für Neue Materialien gGmbH (INM)
  • Slawomir Porada,Daniel Weingarth, Hubertus V.M. Hamelers, Marek Bryjak, Volker Presser, P.M. Biesheuvel: Carbon flow electrodes for continuous operation of capacitive deionization and capacitive mixing energy generation. In: Journal of Materials Chemistry A. 2, 2014, p. 9313 - 9321 [Water desalination, Capacitive deionization, Salinity gradient energy, Energy from CO2 emissions, Carbon flow electrodes].

  • Bruno Bastos Sales, Odne Burheim, Slawomir Porada, Volker Presser, Cees J.N. Buisman, Hubertus V.M. Hamelers: Extraction of energy from small thermal differences near room temperature using capacitive membrane technology. In: Environmental Science & Technology Letters. 1, 2014, p. 356 - 360 [Thermal membrane potential, Ion-exchange membranes, Capacitive carbon electrodes].

  • Slawomir Porada, Juhan Lee, Daniel Weingarth, Volker Presser: Continuous operation of an electrochemical flow capacitor. In: Electrochemistry Communications. 48, 2014, p. 178 - 181 [Electrochemical flow capacitor, Energy storage, Carbon flow electrodes].

  • Matthew E. Suss, Slawomir Porada, Xiaow Sun, P.M. Biesheuvel, Jeyong Yoon, Volker Presser: Water desalination via capacitive deionization: what is it and what can we expect from it?. In: Energy & Environmental Science . 8, 2015, p. 2296 - 2319.

  • Slawomir Porada, Florian Schipper, Mesut Aslan, Markus Antonietti, Volker Presser, Tim-Patrick Fellinger: Capacitive deionization using diomass-based microporous salt-templated heteroatom-doped carbons. In: ChemSusChem. 8, 2015, p. 1867 - 1874 [Capacitive deionization, Charge efficiency, Desalination, Heteroatom carbon, Salt templating].

  • Slawomir Porada, P.M. Biesheuvel, Volker Presser: Comment on Sponge‐Templated Preparation of High Surface Area Graphene with Ultrahigh Capacitive Deionization Performance. In: Advanced Functional Materials. 25, 2015, p. 179 - 181.

Pusavec, Dr. Franci

University of Ljubljana, Slovenia
Field of research: Manufacturing engineering, production engineering
Host: Prof. Dr. Fritz Klocke Rheinisch-Westfälische Technische Hochschule Aachen
  • Dr. Franci Pusavec (F. Pusavec, T. Lu, C. Courbon, J. Rech, U. Aljancic, J. Kopac, I.S. Jawahir): Analysis of the influence of nitrogen phase and surface heat transfer coefficient on cryogenic machining performance . In: Journal of Materials Processing Technology, Volume 233, July 2016, Pages 19-28. 233, 2016, p. 19 - 28 [Production process; Sustainability; Cryogenic machining; Finite Element Method (FEM); Heat transfer coefficient; Machining performance].

Rehmann, Prof. Dr. Lars

University of Western Ontario, Canada
Field of research: Bio-processing technology and engineering
Host: Prof. Dr. Jochen Büchs Rheinisch-Westfälische Technische Hochschule Aachen
  • Lars Regestein, Eric Doerr, Antje Staaden, Lars Rehmann: Document Impact of butyric acid on butanol formation by Clostridium pasteurianum. In: Bioresource Technology. 196, 2015, p. 153 - 159 [Butanol; Butyric acid; Clostridium pasteurianum; Online measurement].

  • Alessandra Procentese, Erin Johnson, Valerie Orr, Garruto Campanile, Jeff Wood, Antonio Marzocchella, Lars Rehmann: Deep eutectic solvent pretreatment and subsequent saccharification of corncob. In: Bioresource Technology. 192, 2015, p. 31 - 36 [Deep eutectic solvents; Enzymatic hydrolysis; Ionic liquids; Lignocellulosic biomass].

  • Martin Schelden, William Lima, Martin Wunderlich, Lars Rehmann, Jochen Büchs, Lars Regestein: Online-Viskositätsmessung am Beispiel der Xanthan-Produktion mit Xanthomonas campestris. In: Chemie-Ingenieur-Technik. 88, 2016, p. 1310 - 1310 [Bioengineering].

  • Valerie Orr, Natalia Plechkova, Keneth Seddon, Lars Rehmann: Disruption and Wet Extraction of the Microalgae Chlorella vulgaris Using Room-Temperature Ionic Liquids. In: ACS Sustainable Chemistry and Engineering. 4, 2016, p. 591 - 600 [Ionic Liquids].

  • Kai Gao, Valerie Orr, Lars Rehmann: Butanol fermentation from microalgae-derived carbohydrates after ionic liquid extraction. In: Bioresouorce Technology. 2016, 2016, p. 77 - 85 [Biofuels, Ionic Liquids].

  • Shreyas Yedahalli, Lars Rehmann, Amarjeet Bassi: Expression of exo-inulinase gene from Aspergillus niger 12 in E. coli strain Rosetta-gami B (DE3) and its characterization. In: Biotechnology Progress. 32, 2016, p. 629 - 637 [Biotechnlogy].

  • Tahereh Sarchami, Erin Johnson, Lars Rehmann: Optimization of fermentation condition favoring butanol production from glycerol by Clostridium pasteurianum DSM 525. In: Bioresource Technology. 208, 2016, p. 73 - 80 [Biofuels].

  • Jun Zheng, Kim Choo, Lars Rehmann: Xylose removal from lignocellulosic biomass via a twin-screw extruder: The effects of screw configurations and operating conditions. In: Biomass and Bioenergy. 88, 2016, p. 10 - 16 [Biomass Pretreatment].

  • Xiafaei Tian, Lars Rehmann, Charles Xu, Zhen Fang: Pretreatment of Eastern White Pine (Pinus strobes L.) for Enzymatic Hydrolysis and Ethanol Production by Organic Electrolyte Solutions. In: ACS Sustainable Chemistry and Engineering. 4, 2016, p. 2822 - 2829 [Biomass Pretreatment].

  • Erin Johnson, Tahereh Sarchami, Sascha Kießlich, Garret Munch, Lars Rehmann: Consolidating biofuel platforms through the fermentative bioconversion of crude glycerol to butanol. In: World Journal of Microbiology and Biotechnology. 32, 2016, p. 103 - 124 [Biofuels, Butanol, Process Design].

  • Erin Johnson, Lars Rehmann: The role of 1,3-propanediol production in fermentation of glycerol by Clostridium pasteurianum. In: Bioresource Technology. 209, 2016, p. 1 - 7 [Biofuels].

  • Kai Gao, Lars Rehmann: Combined Detoxification and In-situ Product Removal by a Single Resin during Lignocellulosic Butanol Production. In: Scientific Reports. 6, 2016, p. 30533 - 30543 [Biofuels].

  • Luis Luque, Valerie Orr, Sean Chen, Roel Westerhof, Stijn Oudenhoven, Guus Van Rossum, Sascha Kersten, Franco Berruti, Lars Rehmann: Lipid accumulation from pinewood pyrolysates by Rhodosporidium diobovatum and Chlorella vulgaris for biodiesel production. In: Bioresource Technology. 2014, 2016, p. 660 - 669 [Biofuels, Pyrolysis, Ionic Liquids].

  • Xiofei Li, Luis Luque-Moreno, Stijn Oudenhoven, Lars Rehmann, Sascha Kersten, Bulo Schuur: Aromatics extraction from pyrolytic sugars using ionic liquid to enhance sugar fermentability. In: Bioresource Technology. 2016, 2016, p. 12 - 18 [Pyrolysis, Biofuels].

  • Valerie Orr, Lars Rehmann: Ionic liquids for the fractionation of microalgae biomass. In: Current Opinion in Green and Sustainable Chemistry. 2, 2016, p. 22 - 27 [Ionic Liquids, Micro-algae].

  • Kuis Luque, Stijn Oudenhoven, Roel Westerhof, Guus Van Rossum, Franco Berruti, Sascha Kersten, Lars Rehmann: Comparison of ethanol production from corn cobs and switchgrass following a pyrolysis-based biorefinery approach. In: Biotechnology for Biofuels. 9, 2016, p. 242 - 251 [Biofuels].

  • Martin Schelden, William Lima, Eric Doerr, Martin Wunderlich, Lars Rehmann, Jochen Büchs, Lars Regestein: Online measurement of viscosity for biological systems in stirred tank bioreactors. In: Biotechnology and Bioengineering. 114, 2017, p. 990 - 997 [Biorector Design].

  • Jun-Woo Kim, Lars Rehmann, Mita Ray: Development of microalgal bioassay based on the community level physiological profiling (CLPP). In: Algal Research. 25, 2017, p. 47 - 53 [ecology, micro algae, assay development ].

  • Sascha Kießlich, Tahereh Sarchami, Garret Munch, Kai Gao, Lars Rehmann, Wojcieck Kujawski, Erin Johnson: Pervaporative butanol removal from PBE fermentation broths for the bioconversion of glycerol by Clostridium pasteurianum. In: Journal of Membrane Science. 535, 2017, p. 79 - 88 [integrated bioprocessing, inset product removal, biofuels].

Ribeiro Jr., Dr. Claudio Patricio

Universidade Federal do Rio de Janeiro (UFRJ), Brazil
Field of research: Chemical process engineering
Host: Prof. Dr. Dieter Mewes Gottfried Wilhelm Leibniz Universität Hannover
  • Claudio Patricio Ribeiro Jr. Dieter Mewes: The effect of electrolytes on the critical velocity for bubble coalescence. In: Chemical Engineering Journal. 126, 2007, p. 23 - 33 [bubbles coalescence bouncing electrolytes bubble columns direct-contact evaporators].

  • Claudio Patricio Ribeiro Jr. Dieter Mewes: The influence of electrolytes on gas hold-up and regime transition in bubble columns. In: Chemical Engineering Science. 62, 2007, p. 4501 - 4509 [bubble columns, gas hold-up, regime transition, electrolytes, bubble coalescence].

Sathiyamoorthy, Prof. Dr. Dakshinamoorthy

Institut Teknologi Brunei, Brunei Darussalam
Field of research: Chemical process engineering
Host: Prof. Dr. Alfons Vogelpohl Technische Universität Clausthal
  • Mandal, D. Vinjamur, M. Sathiyamoorthy, D : Hydrodynamics of beds of small particles in the voids of coarse particles. In: Powder Technology. 235, 2013, p. 256 - 262 [Hydrodynamics of beds, Fluidized bed, Voids].

  • Jyoti, P., Venugopalan, R., Paul, B., Bahadur, J., Ghosh, S.K., Sathiyamoorthy, D: Study of thermal degradation behavior of dense and nanostructured silicon carbide coated carbon fibers in oxidative environments. In: Corrosion Science. 67, 2013, p. 142 - 151 [thermal degradation behavior, fluidized bed].

  • Selvakumar, J., Sathiyamoorthy, D.: Prospects of chemical vapor grown silicon carbide thin films using halogen-free single sources in nuclear reactor applications: A review. In: Journal of Materials Research. 28, 2013, p. 136 - 149 [Prospects of chemical vapor grown silicon carbide thin films, fluidized bed].

  • Venugopalan, R., Roy, M., Thomas, S., Sathiyamoorthy, D., Tyagi, A.K. : Effect of Impregnation Pressure and Time on the Porosity, Structure and Properties of PAN-Fiber Based Carbon Composites. In: Journal of Nuclear Materials. 433, 2013, p. 494 - 503 [Impregnation Pressure, PAN-Fiber Based Carbon Composites, Fluidized bed].

  • Ramani,V, Jyoti, P, Jitendra, N, Pillai, C.G. S, Tyagi, A.K, Sathiyamoorthy D : Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor. In: International Journal of Materials Research. 10, 2012, p. 1251 - 1256 [SiC coating, carbon composites, Fluidized bed].

  • Mollick P. K Sathiyamoorthy, D.: Assessment of Stability of Spouted Bed Using Pressure Fluctuation Analysis. In: Industrial & Engineering Chemistry Research. 51, 2012, p. 12117 - 12125 [Spouted Bed, Fluidized bed].

  • Sharma S.K, Prakash J, Sudarshan K.,. Maheshwari P, Sathiyamoorthy D.. Pujari P.K: Effect of interfacial interaction on free volumes in phenol-formaldehyde resin–carbon nanotube composites: positron annihilation lifetime and age momentum correlation studies,. In: Physical Chemistry and Chemical Physics. 14(31), 2012, p. 10972 - 10978 [interfacial interaction, carbon nanotube composites, fluidized bed].

  • Sathiyamoorthy D.,. Mohanty T,. Srinivas K, Selvaraj D. Thorat D. D: Beryllium pebble preparation and modeling of rotating electrode process. In: Fusion Science and Technology . 61, 2012, p. 159 - 166 [Beryllium pebble, rotating electrode, fluidized bed].

  • Mandal, D., Sharma V. K, Pant H. J., Sathiyamoorthy, D. Vinjamur, M: Quality of Fluidization in Gas-Solid Unary and Packed Fluidized Beds: an Experimental Study Using Gamma-Ray Transmission Technique. In: Powder Technology. 226, 2012, p. 91 - 98 [Fluidization in Gas-Solid Unary, Fluidized Beds].

  • Prakash J,. Gosh S.K, Sathiyamoorthy, D, Ramani V, Paul , B.: Taguchi Method Optimization of Parameters for Growth of Nano Dimensional SiC Wires by Chemical Vapor Deposition Technique. In: Current Nanoscience. 8, 2012, p. 161 - 169 [Optimization of Parameters, Nano Dimensional SiC Wires, fluidized bed].

  • Mandal, D., Sathiyamoorthy, D. Vinjamur, M. : Experimental measurement of effective thermal conductivity of packed lithium-titanate pebble bed. In: Fusion Engineering and Design. 87, 2012, p. 67 - 76 [thermal conductivity, lithium-titanate pebble bed, fluidized bed].

  • Selvakumar, J., Sathiyamoorthy, D. : Nanocrystalline silicon carbide thin films by fluidised/packed bed chemical vapor deposition using a halogen-free single source. In: J. Mater. Chem. 22, 2012, p. 7551 - 7558 [Nanocrystalline silicon carbide, fluidised/packed bed ].

  • Bhowmick, S., Rao, H., Sathiyamoorthy, D: Thermal denitration of ammonium nitrate solution in a fluidized bed reactor. In: Industrial and Engineering Chemistry Research. 51, 2012, p. 8394 - 8403 [Thermal denitration, fluidized bed ].

  • Mandal, D., Sathiyamoorthy, D. Vinjamur: Heat transfer characteristics of lithium titanate particles in GAS-Solid packed fluidized beds. In: Fusion Science and Technology . 62, 2012, p. 150 - 156 [lithium titanate, fluidized bed].

  • Selvakumar, J, Sathiyamoorthy, D. Nagaraja, K.S.: Solid-State Kinetics and Gas-Phase Prediction of 1,4-Bis(Trimethylsilyl)benzene. In: Journal of Thermal Analysis and Calorimetry. 109(1), 2012, p. 113 - 122 [Solid-State Kinetics, (Trimethylsilyl)benzene, fluidized bed].

  • Mandal D., Sathiyamoorthy D.,. Rao V.G, : Preparation and characterization of lithium-titanate pebbles by solid-state reaction extrusion and spherodization techniques for fusion reactor. In: Fusion Engineering and Design. 87, 2012, p. 7 - 12 [lithium-titanate pebbles, fluidized bed].

  • Mandal D,. Vinjamur M,. Sathiyamoorthy D: Angular Properties of Lithium Titanate Particles—an Experimental Study. In: Fusion Science and Technology. 62, 2012, p. 333 - 338 [Lithium Titanate Particles, fluidized bed].

  • Ravikumar, N.L., Kar, K.K., Sathiyamoorthy, D., Kumar, A., Devi, R: Surface finishing of carbon-carbon composites using abrasive flow machining. In: Fullerenes Nanotubes and Carbon Nanostructures . 20, 2012, p. 170 - 182 [carbon-carbon composites, fluidized bed].

  • Mandal, D., Sen, D., Mazumder, S., Shenoi, M.R.K., Ramnathan, S., Sathiyamoorthy, D.: Sintering behavior of lithium-titanate pebbles: Modifications of microstructure and pore morphology. In: Ceramic Engineering and Science Proceedings. 32, 2011, p. 165 - 170 [lithium-titanate pebbles, fluidized bed].

  • Mollick, P.K.,Sathiyamoorthy, D.,Rao, P.T., Rao, V.G.: Modeling of chemical vapor deposition of pyrolytic carbon in a gas-spouted bed reactor. In: Industrial and Engineering Chemistry Research. 50, 2011, p. 13313 - 13321 [pyrolytic carbon, gas-spouted bed reactor, fluidized bed].

  • Kakati, B.K., Sathiyamoorthy, D., Verma, A.: Semi-empirical modeling of electrical conductivity for composite bipolar plate with multiple reinforcements. In: International Journal of Hydrogen Energy. 36, 2011, p. 14851 - 14857 [composite bipolar plate, fluidized bed].

  • Sathiyamoorthy, D., Ghanwat, S.J., Tripathi, B.M., Danani, C: Novel mixed-oxide ceramic for neutron multiplication and tritium generation. In: Journal of Nuclear Materials. 417, 2011, p. 775 - 779 [neutron multiplication, tritium generation, fluidized bed].

  • Selvakumar, J., Sathiyamoorthy, D., Nagaraja, K.S. : Tetrakis(trimethylsilyl)silane: Temperature dependence of vapor pressure, kinetics, and silicon carbide thin films by plasma-assisted liquid injection chemical vapor deposition process. In: Materials Chemistry and Physics. 129, 2011, p. 62 - 67 [Tetrakis(trimethylsilyl)silane, vapor pressure, kinetics, silicon carbide, fluidized bed ].

  • Selvakumar, J., Sathiyamoorthy, D., Nagaraja, K.S.: Relevance of Thermodynamic and Kinetic Parameters of Chemical Vapor Deposition Precursors. In: Journal of Nanoscience and Nanotechnology. 11, 2011, p. 8190 - 8197 [Thermodynamic, Kinetic Parameters, fluidized bed].

  • Thorat, D.D., Tripathi, B.M., Sathiyamoorthy, D: Extraction of beryllium from Indian beryl by ammonium hydrofluoride. In: Hydrometallurgy. 109, 2011, p. 18 - 22 [beryllium, ammonium hydrofluoride, fluidized bed].

  • Bahadur, J., Prakash, J., Sen, D., Mazumder, S., Sathiyamoorthy, D. : Synthesis of carbon nanotubes by CVD and spray pyrolysis and their characterization by scattering techniques. In: AIP Conference Proceedings, Part A. 1349, 2011, p. 275 - 276 [carbon nanotubes, spray pyrolysis, fluidized bed ].

  • Ravikumar, N.L., Kar, K.K., Pandya, C., Sathiyamoorthy, D. : Numerical simulation of the degradation behavior of the phenolic resin matrix during the production of carbon/carbon composites. In: Fullerenes Nanotubes and Carbon Nanostructure. 19, 2011, p. 353 - 372 [phenolic resin matrix,carbon/carbon composites, fluidized bed].

  • Selvakumar, J., Sathiyamoorthy, D., Nagaraja, K.S. : Solid-state kinetics and gas-phase prediction of 1,4-bis(trimethylsilyl)benzene. In: Journal of Thermal Analysis and Calorimetry. 109, 1, 2011, p. 113 - 122 [Solid-state kinetics, gas-phase prediction, fluidized bed].

  • Udayakumar, A., Balasubramanian, M., Gopala, H.B., Sampathkumaran, P., Seetharamu, S., Babu, R., Sathiyamoorthy, D., Reddy, G.R. : Influence of the type of interface on the tribological characteristics of ICVI generated SiCf/SiC composites. In: Wear. 271, 2011, p. 859 - 865 [SiCf/SiC composites, fluidized bed].

  • Mandal, D., Sathiyamoorthy, D., Khakhar, D.V. : Fluidization characteristics of lithium-titanate in gas-solid fluidized bed. In: Fusion Engineering and Design. 86, 2011, p. 393 - 398 [lithium-titanate, fluidized bed].

  • Prasad, T.L., Tewari, P.K., Sathiyamoorthy, D. : Sorption kinetic studies using metal chelate embedded polymers for recovery of heavy metals from desalination effluents. In: International Journal of Nuclear Desalination. 4, 2011, p. 261 - 276 [Sorption kinetic studies, metal chelate embedded polymers, fluidized bed].

  • Ravikumar, N.L., Kar, K.K., Sathiyamoorthy: Effects of graphite filler loading and heat treatment temperature on the properties of phenolic resin based carbon-carbon composites. In: Polymer Composites. 32, 2011, p. 353 - 361 [graphite filler loading,heat treatment temperature carbon-carbon composites, fluidized bed].

  • Selvakumar, J., Sathiyamoorthy, D., Nagaraja, K.S. : Role of vapor pressure of 1,4-bis(trimethylsilyl)benzene in developing silicon carbide thin film using a plasma-assisted liquid injection chemical vapor deposition process. In: Surface and Coatings Technology. 205, 2011, p. 3493 - 3498 [silicon carbide thin film, chemical vapor deposition process, fluidized bed].

  • Ravikumar, N.L., Kar, K.K., Sarkar, S., Sathiyamoorthy, D. : Effects of curing agent and carbon black filler loading on carbonization behavior of phenolic-carbon black composites. In: Polymer Composites. 31, 2011, p. 2069 - 2078 [phenolic-carbon black composites, fluidized bed].

  • Sathiyamoorthy, D., Govardhana Rao, V., Rao, P.T., Mollick, P.K.: Development of pyrolytic carbon coated zirconia pebbles in a high temperature spouted bed. In: Indian Journal of Engineering and Materials Sciences. 17, 2010, p. 349 - 352 [pyrolytic carbon coated zirconia pebbles, fluidized bed].

Shardt, Prof. Dr. Yuri

University of Waterloo, Canada
Field of research: Chemical process engineering
Host: Prof. Dr. Steven X. Ding Universität Duisburg-Essen
  • Yuri A.W. Shardt, Biao Huang, and Steven X. Ding.: Minimal required excitation for closed-loop identification: Some implications for data-driven, system identification. In: Journal of Process Control. 27, 2015, p. 22 - 35 [System identification, Closed-loop, Time delay.].

  • Yuri A.W. Shardt, Haiyang Hao, and Steven X. Ding : A New Soft-Sensor-Based Process Monitoring Scheme Incorporating Infrequent KPI Measurements. In: IEEE Transactions on Industrial Electronics. 62, 2015, p. 3843 - 3851 [process engineering ].

  • Yuri A.W. Shardt: Statistics for Chemical and Process Engineers: A Modern Approach. Cham, Switzerland: Springer International Publishing, 2015, 414 pp. [chemical engineering, process engineering, statistics, modelling.].

Singh, Dr. Krishna Kumar

Bhabha Atomic Research Center, India
Field of research: Process engineering
Host: Prof. Dr. Hans-Jörg Bart Technische Universität Kaiserslautern
  • Dr. Krishna Kumar Singh, Prof. Hans-Jörg Bart: Passage of a Single Bubble through a Liquid−Liquid Interface. In: Industrial & Engineering Chemistry Research. 54, 2015, p. 9478 - 9393 [Fluid dynamics, multiphase flow].

Su, Dr. Yuanhai

Chinese Academy of Sciences, People's Republic of China
Field of research: Chemical process engineering
Host: Prof. Dr. Eugeny Y. Kenig Universität Paderborn
  • Kenig, E.Y., Su, Y., Lautenschleger, A., Chasanis, P. and Grünewald, M.: Micro-separation of fluid systems: A state-of-the-art review. In: Separation and Purification Technology. 120, 2013, p. 245 - 264.

  • Su, Y., Chen, G. and Kenig, E.Y.: An experimental study on the numbering-up of microchannels for liquid mixing. In: Lab on a Chip . 15, 2015, p. 179 - 187.

  • Su, Y., Lautenschleger, A., Chen, G., and Kenig, E.Y.: A numerical study on liquid mixing in multichannel micromixers. In: Industrial & Engineering Chemistry Research . 53, 2014, p. 390 - 401.

Tatlier, Prof. Dr. Melkon

Istanbul Technical University, Turkey
Field of research: Chemical process engineering
Host: Dr. Stefan Henninger Fraunhofer-Institut für Solare Energiesysteme (ISE)
  • Melkon Tatlier, Gunther Munz, Gerrit Fueldner, Stefan K. Henninger: Effect of zeolite A coating thickness on adsorption kinetics for heat pump applications. In: Microporous and Mesoporous Materials. 193, 2014, p. 115 - 121 [Zeolite; Coating; Thickness; Adsorption kinetics].

  • Melkon Tatlier, Harry Kummer, Stefan K. Henninger : Crystallization of zeolite X coatings on stainless steel by microwave heating. In: Journal of Porous Materials. 22, 2015, p. 347 - 352 [Microwaves; Zeolite; Coating; Metal].

Terzis, Dr. Alexandros

Swiss Federal Institute of Technology, Germany
Field of research: Heat / thermal engineering and technology, thermodynamics
Host: Prof. Dr. Bernhard Weigand Universität Stuttgart
  • A. Terzis, E. Roumeli, K. Weishaupt, S. Brack, H. Aslannejad, J. Groß, S.M. Hassanizadeh, R. Helmig and B. Weigand: Heat release at the wetting front during capillary filling of cellulosic micro-substrates. In: Journal of Colloid and Interface Science. 504, 2017, p. 751 - 757 [Paper-based microfluidics, thermodynamics, capillary dynamics, interfacial energy].

  • H. Aslannejad, A. Terzis, S.M. Hassanizadeh and B. Weigand: Occurrence of temperature spikes at a wetting front during spontaneous imbibition. In: Scientific Reports. 7, 2017.

  • A. Terzis: On the correspondence between flow structures and convective heat transfer augmentation for multiple jet impingement. In: Experiments in Fluids. 57, 2016, [flow field measurements convective heat transfer measurements multiple jet impingement ].

Tian, Prof. Dr. Yanling

Tianjin University, People's Republic of China
Field of research: Automated production, automatic production, robots
Host: Prof. Dr. Sergej Fatikow Carl von Ossietzky Universität Oldenburg
  • Yanling Tian, Ribo Wei, Volkmar. Eichhorn, Sergej Fatikow, Bijan Shirinzadeh, Dawei Zhang: Mechanical properties of boron nitride nanocones. In: Journal of Applied Physics. 111, 2012, p. 104316 - 104322 [Boron nitride nanocone, Molecular dynamics, Mechanical properties].

  • Yanling Tian, Ribo Wei, Weiguo Gao, Volkmar Eichhorn, Sergej Fatikow, Dawei Zhang: Tensile and compressive behavior of silicon nanocones with 120° disclination. In: Micro and Nano Letters. 7, 2012, p. 798 - 801 [ Silicon carbide nanocone, Molecular dynamics, Tensile behavior, Compressive behavior].

  • Yanling Tian, Ribo Wei, Volkmar Eichhorn, Sergej Fatikow, Bijan Shirinzadeh, Dawei Zhang: Buckling and postbuckling behavior of carbon nanocones. In: Nanoscience and Nanotechnology Letters. 4, 2012, p. 766 - 874 [ Carbon nanocones, molecular dynamics, buckling, postbuckling].

Tomin, Dr. Nikita

Russian Academy of Sciences, Russian Federation
Field of research: Electrical energy / power engineering
Host: Prof. Dr. Christian Rehtanz Technische Universität Dortmund
  • Victor Kurbatsky, Nikita Tomin, Vadim Spiryaev, Paul Leahy, Denis Sidorov : Power System Parameters Forecasting Using Hilbert-Huang Transform and Machine Learning. In: News of Irkutsk State University. 4, 2013, p. 1 - 13 [power systems parameters, forecasting, integral transforms, artifical neural networks, smachine learning, Hilbert-Huang Transform].

  • Nicolay Voropai, Dmitry Efimov, Irina Kolosok, Victor Kurbatsky, Anna. Glazunova, Elena Korkina, Alexey Osak, Nikita Tomin, Daniil Panasetsky: Smart technologies in emergency control of Russia's unified energy system. In: IEEE Transactions on Smart Grid. 4 (3), 2013, p. 1732 - 1740 [Artificial intelligence application, electric power system, emergency control, smart grid concept.].

Tran, Dr. Luc-Sy

Ghent University, Belgium
Field of research: Internal combustion engines, internal combustion technology
Host: Prof. Dr. Katharina Kohse-Höinghaus Universität Bielefeld
  • Luc-Sy Tran, Julia Pieper, Hans-Heinrich Carstensen, Hao Zhao, Isabelle Graf, Yiguang Ju, Fei Qi, Katharina Kohse-Höinghaus: Experimental and kinetic modeling study of diethyl ether flames. In: Proceedings of the Combustion Institute. 36, 2017, p. 1165 - 1173 [Biofuel, Diethyl ether, Laminar premixed flame, Molecular-beam mass spectrometry, Detailed kinetic model].

  • Luc-Sy Tran, Julia Pieper, Meirong Zeng, Yuyang Li, Xiaoyuan Zhang, Wei Li, Isabelle Graf, Fei Qi, Katharina Kohse-Höinghaus: Influence of the biofuel isomers diethyl ether and n-butanol on flame structure and pollutant formation in premixed n-butane flames. In: Combustion and Flame. 175, 2017, p. 47 - 59 [Biofuel, DEE, n-butanol, n-butane, Molecular-beam mass spectrometry, Kinetic model ].

  • Ruben De Bruycker, Luc-Sy Tran, Hans-Heinrich Carstensen, Pierre-Alexandre Glaude, Fabiola Monge, Maria U. Alzueta, Frédérique Battin-Leclerc, Kevin M. Van Geem: Experimental and modeling study of the pyrolysis and combustion of 2-methyl-tetrahydrofuran. In: Combustion and Flame. 176, 2017, p. 409 - 428 [Bio-fuel, 2-Methyl-tetrahydrofuran, Pyrolysis, Laminar premixed flame, Detailed kinetic model ].

  • Luc-Sy Tran, Zhandong Wang, Hans-Heinrich Carstensen, Christian Hemken, Frédérique Battin-Leclerc, Katharina Kohse-Höinghaus: Comparative experimental and modeling study of the low- to moderate-temperature oxidation chemistry of 2,5-dimethylfuran, 2-methylfuran, and furan. In: Combustion and Flame. 181, 2017, p. 251 - 269 [Furan, 2-methylfuran, 2,5-dimethylfuran, Flow reactor, Low- to moderate-temperature oxidation, Detailed kinetic model ].

  • Daniel Felsmann, Arnas Lucassen, Julia Krüger, Christian Hemken, Luc-Sy Tran, Julia Pieper, Gustavo A. Garcia, Andreas Brockhinke, Laurent Nahon, Katharina Kohse-Höinghaus: Progress in fixed-photon-energytime-efficient PEPICO measurements in quantitative flame analysis. In: Zeitschrift für Physikalische Chemie. 230, 2016, p. 1067 - 1097 [Photoelectron Photoion Coincidence (PEPICO) Spectroscopy, Molecular-Beam Mass Spectrometry (MBMS), Combustion, Multiplex Analysis, Intermediate Species].

Verma, Prof. Dr. Nishith

Indian Institute of Technology (IIT) Kanpur, India
Field of research: Chemical process engineering
Host: Prof. Dr. Wolfgang Peukert Friedrich-Alexander-Universität Erlangen-Nürnberg
  • Verma, N., Salem, K., Mewes, D. : Simulation of micro and macro transport in a packed bed of porous adsorbents by lattice Boltzmann methods¿. In: Chem. Engg Sci . 62, 2007, p. 3685 - 3698 [Adsorption, Lattice Boltzmann Modelling].

  • Manjhi, N., Verma, N., Salem, K., Mewes, D. : Simulation of 3D velocity and concentration profiles in a packed bed adsorber by lattice Boltzmann methods. In: Chem. Engg Sci.,. 61, 2007, p. 7754 - 7765 [Adsorption, Lattice Boltzmann Modelling].

Vladisavljevic, Prof. Dr.-Ing. Goran

Loughborough University, United Kingdom
Field of research: Chemical process engineering
Host: Prof. Dr. Helmar Schubert Universität Karlsruhe (TH)
  • Daniel Mark, Stefan Haeberle, Roland Zengerle, Jens Ducree, Goran T. Vladisavljevic: Production of chitosan microbeads using centrifugally driven flow of gel-forming solutions through a polymeric micronozzle. In: Journal of Colloid and Interface Science. 336, 2009, p. 634 - 641 [Hydrogel microbeads, chitosan, centrifugal, encapsulation, microfluidics, ionotropic gelation, monodisperse drops].

  • Goran Vladisavljevic, Marc Schlender: Emulgieren mit mikrostrukturierten Systemen. In: Emulgiertechnik – Grundlagen, Verfahren und Anwendungen, 3. Auflage. (Ed. Karsten Köhler, Heike P. Schuchmann) Hamburg: B. Behr’s Verlag GmbH & Co. KG, 2012, p. 253 - 290 [Mikrofluidik, Lipidvesikel, Membranemulgieren, Fotolithography, Kolloidosomen].

Wang, Prof. Dr.-Ing. Haiqing

China University of Petroleum, People's Republic of China
Field of research: Manufacturing engineering, production engineering
Host: Prof. Dr. Steven X. Ding Universität Duisburg-Essen
  • Kai Song, Wang Haiqing(*), Li Ping and Feng Zhigang: Quality Based Prioritized Sensor Fault Monitoring Methodology. In: Chinese Journal of Chemical Engineering. Vol.16(4), 2008, p. 584 - 589 [Sensor Fault; Statistical method].

  • Yi Liu, Yanchen Gao, Zengliang Gao, Haiqing Wang (*) and Ping Li: Simple Nonlinear Predictive Control Strategy for Chemical Processes Using Sparse Kernel Learning with Polynomial Form. In: Ind. Eng. Chem. Res. . Vol.49(17), 2010, p. 8209 - 8218 [Nonlinear Predictive Control; Kernel Learning ].

  • Yi Liu, Haiqing Wang(*), Jiang Yu and Ping Li: Selective recursive kernel learning for online identification of nonlinear systems with NARX form. In: Journal of Process Control. Vol.20, 2010, p. 181 - 194 [Nonlinear systems identification; Kernel learning;].

Wang, Dr. Hao

National University of Singapore, Singapore
Field of research: Manufacturing engineering, production engineering
Host: Prof. Dr. Ekkard Brinksmeier Universität Bremen
  • H. Wang, O. Riemer, E. Brinksmeier: Theoretical study on the critical chip thickness in microcutting CaF2 single crystals with crystal plasticity finite element method. In: Proceedings of Euspen’s 15th International Conference & Exhibition, Leuven, Belgium (Paper No. P5.18). 2015, [ultraprecision machining; microcutting; brittle materials; crystal plasticity; finite element method].

  • H. Wang, O. Riemer, K. Rickens, E. Brinksmeier: On the mechanism of asymmetric ductile-brittle transition in microcutting of (111) CaF2 single crystals. In: Scripta Materialia. 114, 2016, p. 21 - 26 [ultraprecision machining; microcutting; ductile-brittle transition; lattice rotation; brittle materials; calcium fluoride; crystal plasticity; finite element method].

Xu, Prof. Dr.-Ing. Guangwen

Chinese Academy of Sciences, People's Republic of China
Field of research: Energy engineering, energy technology, power engineering
Host: Prof. Dr. Joachim Werther Technische Universität Hamburg-Harburg
  • Takahiro Murakami, Guangwen Xu, Toshiyuki Suda, Yushiaki Matsuzawa, Hidehisa Tani and Toshiro Fujimori: Some Process fundamentals of biomass gasification in dual fluidized bed. In: Fuel. 86, 2007, p. 244 - 255 [Biomass,Coffee grounds, Dual fluidized bed gasification, Process simulation].

  • Takahiro Murakami, Guangwen Xu, Toshiyuki Suda, Yoshiaki Matsuzawa and Hidehisa Tani : Efficiency upgrade and tar elimination of in fluidized bed biomass gasification (in Japanese). In: Kagaku Kogaku Ronbunshu . 33, 2007, p. 369 - 375 [Fluidized Bed Gasification, Catalytic Gasification, Biomass, Calcium, Tar].

  • Takahiro Murakami,Guangwen Xu, Toshiyuki Suda, Yoshiaki Matsuzawa and Hidehisa Tani, Toshiro Fujimori:: Some Process fundamentals of biomass gasification in dual fluidized bed. In: Fuel. 86, 2007, p. 244 - 255 [Biomass; Coffee grounds; Dual fluidized bed gasification].

  • Takahiro Murakami, Guangwen Xu, Toshiyuki Suda, Yoshiaki Matsuzawa, Hidehisa Tani: Development of pyrolytic gasifer (in Japanese). In: Journal High Temperature Society. 33, 2007, p. 21 - 26 [Pyrolytic Gasifier, Catalytic Gasification, Biomass, Calcium, Tar].

  • Li Dong, Shiqiu Gao, Wenli Song, Guangwen Xu: Experimental study of NO reduction over biomass char. In: Fuel Processing Technology. 88, 2007, p. 707 - 715 [Biomass char; NO reduction; Kinetics].

  • Guangwen Xu, Wenfeng Ji, Yinhua Wan and Chunzhao Liu: Energy production with light-industry biomass process residues rich in cellulose: a technical review (in Chinese). In: Progress in Chemistry. 19, 2007, p. 1164 - 1176 [Process residue, Light industry, Biomass combustion, Biomass gasification, Bioethanol, Biogas].

  • Zhan-Guo Zhang and Guangwen Xu: Thermally differential methanation¿a novel method to realize highly selective removal of CO from H2-rich reformates. In: Catal. Commun.. 8, 2007, p. 1953 - 1956 [CO removal,Thermally differential methanation, Ru catalyst, PEFC].

  • Xinhua Liu, Guangwen Xu and Shiqiu Gao: Micro fluidized bed: wall effect and operability. In: Chem. Eng. Journal. 137, 2008, p. 302 - 307 [Wall effect, Gas¿solid flow, Micro fluidized bed, Minimum fluidization velocity, Minimum bubbling velocity].

Yu, Prof. Dr. Junzhi

Chinese Academy of Sciences, People's Republic of China
Field of research: Automated production, automatic production, robots
Host: Prof. Dr. Jianwei Zhang Universität Hamburg
  • Junzhi Yu, Min Tan, and Jianwei Zhang: Swimming simulation and system implementation of a multilink robotic fish. In: International Journal of Information and Systems Sciences. 6, 2010, p. 365 - 376 [Kinematic simulations, System implementation, Fish swimming, Body wave, Robotic fish.].

  • Junzhi Yu, Rui Ding, Qinghai Yang, Min Tan, Weibing Wang, and Jianwei Zhang: On a bio-inspired amphibious robot capable of multimodal motion. In: IEEE/ASME Transactions on Mechatronics. 99, 2011, p. 1 - 10 [Digital Object Identifier: 10.1109/TMECH.2011.2132732; Amphibious robot, bio-inspired robot, mechanical design, motion control, multimodal motion.].

Zhang, Dr. Shuwei

Draworld Environment Research Centre (DERC), People's Republic of China
Field of research: Energy management, power economy
Host: Prof. Dr. Ottmar Edenhofer Potsdam-Institut für Klimafolgenforschung (PIK)
  • Shuwei Zhang, Kejun Jiang, Deshun Liu: Passenger Transport Modal Split based on Budgets and Implication for Energy Consumption: Approach and Application in China. In: Energy Policy. 35, 2007, p. 4434 - 4443 [Transportation; Modal split; Energy consumption].

  • Shuwei Zhang; Nico Bauer: Utilization of the non-fossil fuel target and its implications in China. In: Climate Policy. 13, 2013, p. 1 - 18 [carbon intensity; China; energy intensity; non-fossil fuel target].

  • Shuwei Zhang, Nico Bauer, Gunnar Lunderer, Elmar Kriegler: Role of technologies in energy-related CO2 mitigation in China within a climate-protection world: A scenarios analysis using REMIND. In: Applied Energy. 2013, [Energy technologies Carbon emission mitigation China].

  • Dr. Shuwei Zhang and Xuying Qin: “Promoting large and closing small” in China’s coal power sector 2006-2013: CO2 mitigation assessment based on vintage structure. In: “Promoting large and closing small” in China’s coal power sector 2006-2013: CO2 mitigation assessment based on vintage structure. 5, 2016, p. 1 - 15 [Power, Vintage Structure, CO2 mitigation].

  • Xin Wang and Dr. Shuwei Zhang: Exploring linkages among China's 2030 climate targets. In: Climate Policy. 1, 2016, p. 1 - 12 [INDC, China, non-fossil fuel target].

  • Dr. Shuwei Zhang: Renewables: Costly long-distance power. In: Nature. 514, 2014, p. 168 - 168 [Renewable, China, Grid].

Zhao, Prof. Dr. Haibo

Huazhong University of Science and Technology, People's Republic of China
Field of research: Chemical process engineering
Host: Prof. Dr. Frank Einar Kruis Universität Duisburg-Essen
  • Haibo Zhao, Chuguang Zheng: Correcting the multi-Monte Carlo method for particle coagulation. In: Powder Technology. 193, 2009, p. 120 - 123 [Coagulation,Population balance,Monte Carlo,Weighting scheme].

  • Haibo Zhao,Chuguang Zheng: A new event-driven constant volume method for solution of the time evolution of particle size distribution. In: Journal of Computational Physics. 228, 2009, p. 1412 - 1428 [Population balance modeling;Differentially weighting;Coagulation;Breakage;Particulate processes].

  • Haibo Zhao, Chuguang Zheng: Modeling of gravitational wet scrubbers with electrostatic enhancement. In: Chemical Engineering & Technology. 31, 2008, p. 1824 - 1837 [Dust-removal technique;Modeling;Monte Carlo method;Operation optimization;Particulate matter;Population balance].