| 2021 | Kostyrko, S. and Grekov, M. and Altenbach, H.: Coupled effect of curved surface and interface on stress state of wrinkled thin film coating at the nanoscale. In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, n/a, 2021, e202000202 |
|---|
| 2021 | V. N. Burlayenko and H. Altenbach and S. D. Dimitrova: Debonding Resistance Evaluation in Virtual Testing of Sandwich Specimens. In: {H. Altenbach and M. Amabili and Y. V. Mikhlin}, Nonlinear Mechanics of Complex Structures - From Theory to Engineering Applications. Cham: Springer Nature, 2021. 19-38 |
|---|
| 2021 | B. Kozhamkulov and K. Kadyrakunov and K. Jumadillayev and Zh. Primkulova and H. Altenbach: Destruction of PMMA after the irradiation with high-energy electrons and a mechanical point impact. In: Mechanics of Composite Materials, 56, 2021, 817--824 |
|---|
| 2021 | O. Sukhanova and O. Larin and K. Naumenko and H. Altenbach: Dynamics of Curved Laminated Glass Composite Panels Under Impact Loading. In: {H. Altenbach and M. Amabili and Y. V. Mikhlin}, Nonlinear Mechanics of Complex Structures - From Theory to Engineering Applications. Cham: Springer Nature, 2021. 91-101 |
|---|
| 2021 | Nazarenko, L. and Stolarski, H. and Altenbach, H.: Effective properties of particulate nano-composites including Steigmann–Ogden model of material surface. In: Computational Mechanics, n/a, 2021, 15 |
|---|
| 2021 | V. N. Burlayenko and T. Sadowski and H. Altenbach: Efficient free vibration analysis of {FGM} sandwich flat panels with conventional shell elements. In: Mechanics of Advanced Materials and Structures, n/a, 2021, n/a |
|---|
| 2021 | M. Weber and R. Gl\"{u}ge and H. Altenbach: Evolution of the stiffness tetrad in fiber-reinforced materials under large plastic strain - {M}aterial plasticity. In: Archive of Applied Mechanics, n/a, 2021, n/a |
|---|
| 2021 | Belov, P. A. and Altenbach, H. and Lurie, S.A. and Nazarenko, L. and Kriven, G. I.: Generalized Brinkman-Type Fluid Model and Coupled Heat Conductivity Problem. In: Lobachevskii Journal of Mathematics, 42, 2021, 1786-1799 |
|---|
| 2021 | P. A. Belov and H. Altenbach and S.A. Lurie and L. Nazarenko and and G. I. Kriven: Generalized {B}rinkman-Type Fluid Model and Coupled Heat Conductivity Problem. In: Lobachevskii Journal of Mathematics, 42, 2021, 1786-1799 |
|---|
| 2021 | Nazarenko, L. and Gl\"{u}ge, R. and Altenbach, H.: Inverse Hooke's law and complementary strain energy in coupled strain gradient elasticity. In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, n/a, 2021, e202100005 |
|---|
| 2021 | : Leonid Borisovich Getsov: Materials and Strength of Gas Turbine Parts, Volume 1 - Materials, Properties, Damage, Deformation and Fracture Models. Springer Nature, 2021 |
|---|
| 2021 | R. Glüge and H. Altenbach and S. Eisenträger: Locally-synchronous, iterative solver for Fourier-based homogenization. In: Computational Mechanics, n/a, 2021, n/a |
|---|
| 2021 | : Modeling, Synthesis and Fracture of Advanced Materials for Industrial and Medical Applications. Springer Nature, 2021 |
|---|
| 2021 | : Multiscale Solid Mechanics - Strength, Durability, and Dynamics. Springer Nature, 2021 |
|---|
| 2021 | A{\ss}mus, M. and Altenbach, H.: On the Principles to Derive Plate Theories. In: {No"{e}l Challamel and Julius Kaplunov and Izuru Takewaki}, Modern Trends in Structural and Solid Mechanics. Cham: Wiley, 2021. 29-42 |
|---|
| 2021 | Nazarenko, L. and Gl\"{u}ge, R. and Altenbach, H.: Positive definiteness in coupled strain gradient elasticity. In: Continuum Mech. Thermodyn., 33, 2021, 713-725 |
|---|
| 2021 | Trivedi, N. and Das, S. and Altenbach, H.: Study of collinear cracks in a composite medium subjected to time-harmonic wave disturbance. In: ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 101, 2021, e202000307 |
|---|
| 2020 | A{\ss}mus, M. and Altenbach, H.: A Mathematically Consistent Vector-Matrix Representation of Generalized Hooke’s Law for Shear-Rigid Plates. In: {H. Altenbach and V. A. Eremeyev and I. S. Pavlov and A. V. Porubov}, Nonlinear Wave Dynamics of Materials and Structures. Cham: Springer Nature, 2020. 57-67 |
|---|
| 2020 | Altenbach, H.: Airy, George Biddell. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 35--36 |
|---|
| 2020 | : Analysis of Shells, Plates, and Beams - A State of the Art Report. Springer Nature, 2020 |
|---|
| 2020 | {Eisentr"{a}ger, J. and Naumenko, K. and Kostenko, Y. and Altenbach, H.}: Analysis of a Power Plant Rotor Made of Tempered Martensitic Steel Based on a Composite Model of Inelastic Deformation. In: {Naumenko, K. and Kr"{u}ger, M.}, Advances in Mechanics of High-Temperature Materials. Cham: Springer International Publishing, 2020. 1-34 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Argyris, John Hadji. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 120--121 |
|---|
| 2020 | Altenbach, H.: Bernoulli, Daniel. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 166--167 |
|---|
| 2020 | Altenbach, H.: Bernoulli, Jakob I. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 167--168 |
|---|
| 2020 | Altenbach, H.: Bernoulli, Johann. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 168--169 |
|---|
| 2020 | Altenbach, H.: Bingham, Eugene Cook. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 170--170 |
|---|
| 2020 | Altenbach, H.: Bridgman, Percy Williams. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 211--212 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Burgers, Johannes Martinus. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 242--243 |
|---|
| 2020 | Altenbach, H.: Cauchy, Augustin Louis. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 262--263 |
|---|
| 2020 | Altenbach, H.: Christoffel, Elwin Bruno. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 281--282 |
|---|
| 2020 | Altenbach, H.: Codazzi, Delfino. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 314--315 |
|---|
| 2020 | Nordmann, J. and Naumenko, K. and Altenbach, H.: Cohesive Zone Models—Theory, Numerics and Usage in High-Temperature Applications to Describe Cracking and Delamination. In: {Naumenko, K. and Kr"{u}ger, M.}, Advances in Mechanics of High-Temperature Materials. Cham: Springer International Publishing, 2020. 131-168 |
|---|
| 2020 | Altenbach, H.: Coleman, Bernard David. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 315--316 |
|---|
| 2020 | {Eisentr"{a}ger, J. and Altenbach, H.}: Creep in Heat-resistant Steels at Elevated Temperatures. In: {H. Altenbach and A. "{O}chsner}, State of the Art and Future Trends in Material Modeling. Cham: Springer International Publishing, 2020. 79-112 |
|---|
| 2020 | Altenbach, H.: Descartes, Ren{\'e}. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 609--610 |
|---|
| 2020 | B. Kozhamkulov and K. Kadyrakunov and K. Jumadillayev and Zh. Primkulova and H. Altenbach: Destruction of PMMA after the irradiation with high-energy electrons and a mechanical point impact (in Russ.). In: Mekh. komp. mat., 56, 2020, 1179--1188 |
|---|
| 2020 | Altenbach, H.: Drucker, Daniel Charles. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 690--691 |
|---|
| 2020 | : Encyclopedia of Continuum Mechanics. Springer, 2020 |
|---|
| 2020 | Altenbach, H.: Engesser, Friedrich. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 838--839 |
|---|
| 2020 | : Engineering Design Applications II. Springer, 2020 |
|---|
| 2020 | : Engineering Design Applications III. Springer, 2020 |
|---|
| 2020 | Altenbach, H.: Euclid. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 862--863 |
|---|
| 2020 | Altenbach, H.: Euler, Leonhard. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 863--867 |
|---|
| 2020 | Weber, M. and Gl\"{u}ge, R. and Altenbach, H.: Evolution of the stiffness tetrad in fiber-reinforced materials under large plastic strain - Material plasticity. In: Archive of Applied Mechanics, 2020, 22 |
|---|
| 2020 | Rosendahl, P. L. and Kolupaev, V. A. and Altenbach, H.: Extreme Yield Figures for Universal Strength Criteria. In: {H. Altenbach and A. "{O}chsner}, State of the Art and Future Trends in Material Modeling. Cham: Springer International Publishing, 2020. 259-324 |
|---|
| 2020 | Altenbach, H.: Föppl, August Otto. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 932--934 |
|---|
| 2020 | Altenbach, H.: Gau{\ss}, Johann Carl Friedrich. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1029--1030 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Geiringer, Hilda. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1031--1033 |
|---|
| 2020 | Altenbach, H.: Germain, Marie-Sophie. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1050--1051 |
|---|
| 2020 | Altenbach, H.: Gol'denveizer, Alexei L'vovich. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1054--1055 |
|---|
| 2020 | Altenbach, H.: Green, George. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1055--1056 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Hencky, Heinrich. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1061--1063 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Hill, Rodney. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1127--1129 |
|---|
| 2020 | Altenbach, H.: Hooke, Robert. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1240--1241 |
|---|
| 2020 | Rizov, V. and H. Altenbach: Influence of material non-linearity on delamination in multilayered three-point bending beams. In: Journal of Theoretical and Applied Mechanics - Solid Mechanics, 50, 2020, 70-82 |
|---|
| 2020 | N. Mahmood and I. Kolesov and R. Gl\"{u}ge and H. Altenbach and R. Androsch and M. Beiner: Influence of structure gradients in injection moldings of isotactic polypropylene on their mechanical properties. In: Polymer, 200, 2020, 122556 |
|---|
| 2020 | Altenbach, H.
and Eisenträger, Johanna: Introduction to Creep Mechanics. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1337--1344 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Johnson, William. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1373--1375 |
|---|
| 2020 | Altenbach, H.: Kirchhoff, Gustav Robert. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1405--1406 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Kudo, Hideaki. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1422--1423 |
|---|
| 2020 | Altenbach, H.
and Jaiani, G.: Kupradze, Victor. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1423--1424 |
|---|
| 2020 | Altenbach, H.: Lagrange, Joseph-Louis. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1440--1442 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Lehmann, Johannes Theodor. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1456--1457 |
|---|
| 2020 | Altenbach, H.: Levy, Maurice. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1467--1468 |
|---|
| 2020 | Altenbach, H.: Love, Augustus Edward Hough. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1492--1493 |
|---|
| 2020 | Altenbach, H.: Lurie, Anatoli Isakowitsch. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1495--1496 |
|---|
| 2020 | Altenbach, H.: Mainardi, Gaspare. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1506--1506 |
|---|
| 2020 | Altenbach, H.: Marguerre, Karl. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1506--1508 |
|---|
| 2020 | Altenbach, H. and Collet, B. and Michelitsch, T. and Pouget, J. and Rousseau, M. and Trimarco, C.: Maugin, G{\'e}rard A.. In: Altenbach, H. and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1522--1526 |
|---|
| 2020 | Altenbach, H.: Mechanics of Materials - Werkstoffmechanik. In: R. Kienzler and D. L. McDowell and S. M\"{u}ller and E. A. Werner, Mechanics of Materials: Towards Predictive Methods for Kinetics in Plasticity, Fracture, and Damage - Mathematisches Forschungsinstitut Oberwolfach, Report No. 13/2020. 2020. 13-15 |
|---|
| 2020 | Altenbach, H.: Mindlin, Raymond David. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1653--1654 |
|---|
| 2020 | Nazarenko, L. and Stolarski, H. and Altenbach, H.: Modeling Cylindrical Inhomogeneity of Finite Length with Steigmann–Ogden Interface. In: Technologies, 8, 2020, 15 |
|---|
| 2020 | M. A. Tolcha and H. Altenbach and G. S. Tibba: Modeling creep-fatigue interaction damage and H13 tool steel material response for rolling die under hot milling. In: Engineering Fracture Mechanics, 223, 2020, 106770 |
|---|
| 2020 | Altenbach, H.: Mushtari, Khamid Muzafarovich. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1766--1767 |
|---|
| 2020 | Altenbach, H.
and Jaiani, G.: Muskhelishvili, Nikoloz. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1767--1769 |
|---|
| 2020 | Altenbach, H.: Newton, Isaac. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1808--1810 |
|---|
| 2020 | Altenbach, H.
and Jaiani, G.: Nikuradze, Johann (Ivane). In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1811--1811 |
|---|
| 2020 | Altenbach, H.: Noll, Walter. In: Altenbach, H. and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1825--1826 |
|---|
| 2020 | : Nonlinear Wave Dynamics of Materials and Structures. Springer, 2020 |
|---|
| 2020 | Altenbach, H.: Novozhilov, Valentin. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1912--1913 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: N{\'a}dai, Arp{\'a}d. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1771--1772 |
|---|
| 2020 | Altenbach, H. and Eremeyev, V. A.: On Nonlinear Dynamic Theory of Thin Plates with Surface Stresses. In: H. Altenbach and H. Irschik and V. P. Matveenko, Contributions to Advanced Dynamics and Continuum Mechanics. Cham: Springer International Publishing, 2020. 19-26 |
|---|
| 2020 | {A{\ss}mus, M. and Altenbach, H.}: On Viscoelasticity in the Theory of Geometrically Linear Plates. In: {H. Altenbach and A. "{O}chsner}, State of the Art and Future Trends in Material Modeling. Cham: Springer International Publishing, 2020. 1-22 |
|---|
| 2020 | A{\ss}mus, M. and Gl\"{u}ge, R. and Altenbach, H.: On the Analytical Estimation for Isotropic Approximation of Elastic Properties applied to Polycrystalline Cubic Silicon used at Solar Cells. In: Technische Mechanik, 40, 2020, 120-133 |
|---|
| 2020 | Gl\"{u}ge, R. and Altenbach, H. and N. Mahmood and M. Beiner: On the Difference Between the Tensile Stiffness of Bulk and Slice Samples of Microstructured Materials. In: Applied Composite Materials, 2020, 21 |
|---|
| 2020 | Altenbach, H. and K. Knape: On the main directions in creep mechanics of metallic materials. In: Proceedings of the National Academy of Sciences of Armenia: Mechanics, 73, 2020, 24-43 |
|---|
| 2020 | Altenbach, H.
and Jaiani, G.: Oniashvili, Otar. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1969--1970 |
|---|
| 2020 | M. Jafari and S. A. M. Hoseyni and H. Altenbach and E.-M. Craciun: Optimum Design of Infinite Perforated Orthotropic and Isotropic Plates. In: mathematics, 8, 2020, 1-24 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Orowan, Egon. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1970--1972 |
|---|
| 2020 | Altenbach, H.
and Belyaev, Alexander: Palmov, Vladimir Alexandrovich. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1973--1974 |
|---|
| 2020 | Altenbach, H.: Papkovich, Petr Fedorovich. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1974--1975 |
|---|
| 2020 | : Plasticity, Damage and Fracture in Advanced Materials. Springer, 2020 |
|---|
| 2020 | Altenbach, H.: Plate Theory After von K{\'a}rm{\'a}n. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2068--2076 |
|---|
| 2020 | Altenbach, H.: Poisson, Sim{\'e}on Denis. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2080--2081 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Polanyi, Mih{\'a}ly (Michael). In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2081--2082 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Prager, William. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2082--2084 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Prandtl, Ludwig. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2084--2085 |
|---|
| 2020 | Altenbach, H.
and Lomakin, E. V.: Rabotnov, Yuri Nikolaevich. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2115--2118 |
|---|
| 2020 | Altenbach, H.: Reissner, Eric. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2181--2182 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Reuss, Andr{\'a}s. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2191--2192 |
|---|
| 2020 | Singh, A. and Das, S. and Altenbach, H. and Craciun, E.-M.: Semi-infinite moving crack in an orthotropic strip sandwiched between two identical half planes. In: ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 100, 2020, e201900202 |
|---|
| 2020 | Altenbach, H. and Breslavsky, D. and Mietielov, V. and Tatarinova, O.: Short Term Transversally Isotropic Creep of Plates Under Static and Periodic Loading. In: {Naumenko, K. and Kr"{u}ger, M.}, Advances in Mechanics of High-Temperature Materials. Cham: Springer International Publishing, 2020. 181-211 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Siebel, Erich. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2279--2280 |
|---|
| 2020 | Altenbach, H.: Stokes, George Gabriel. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2328--2330 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Taylor, Geoffrey Ingram. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2431--2432 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Truesdell, Clifford Ambrose III. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2573--2574 |
|---|
| 2020 | Altenbach, H.
and Jaiani, G.: Vekua, Ilia. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2677--2680 |
|---|
| 2020 | Altenbach, H.: Voigt, Woldemar. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2733--2734 |
|---|
| 2020 | Altenbach, H.: Westergaard, Harold Malcolm. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2786--2787 |
|---|
| 2020 | Altenbach, H.: Young, Thomas. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2789--2790 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: Zerna, Wolfgang. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2791--2792 |
|---|
| 2020 | Altenbach, H.
and Ivanova, E. A.: Zhilin, Pavel Andreevich. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 2792--2795 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: von K{\'a}rm{\'a}n, Theodore. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1387--1390 |
|---|
| 2020 | Altenbach, H.
and Bruhns, O. T.: von Mises, Richard. In: Altenbach, H.
and Öchsner, A., Encyclopedia of Continuum Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2020. 1654--1656 |
|---|
| 2019 | J. Nordmann and K. Naumenko and H. Altenbach: A Damage Mechanics based Cohesive Zone Model with Damage Gradient Extension for Creep-Fatigue-Interaction. In: Key Engineering Materials, 794, 2019, 253--259 |
|---|
| 2019 | M. A{\ss}mus and K. Naumenko and A. {"{O}}chsner and V. A. Eremeyev and H. Altenbach: A Generalized Framework Towards Structural Mechanics of Three-layered Composite Structures. In: Technische Mechanik, 39, 2019, 202-219 |
|---|
| 2019 | L. Nazarenko and H. Stolarski and H. Altenbach: A statistical interphase damage model of random particulate composites. In: International Journal of Plasticity, 116, 2019, 118 - 142 |
|---|
| 2019 | M. W. Wakjira and H. Altenbach and J. R. Perumalla: Analysis of CSN 12050 Carbon Steel in Dry Turning Process for Product Sustainability Optimization Using Taguchi Technique. In: Journal of Engineering, 2019, 2019, 10 |
|---|
| 2019 | V. Rizov and H. Altenbach: Application of the Classical Beam Theory for Studying Lengthwise Fracture of Functionally Graded Beams. In: Technische Mechanik, 39, 2019, 229-240 |
|---|
| 2019 | Wakjira, M. W. and Altenbach, H. and Ramulu, P. J.: CSN 12050 Carbon Steel Mechanical Property Enhancement Using Thermal Treatment to Optimize Product Sustainability. In: Zimale, Fasikaw Atanaw and Enku Nigussie, Temesgen and Fanta, Solomon Workneh, Advances of Science and Technology. ICAST 2018. Cham: Springer International Publishing, 2019. 113--121 |
|---|
| 2019 | V. S. Kirilyuk and O. I. Levchuk and H. Altenbach: Calculation of Stress Intensity Factors for an Arbitrary Oriented Penny-shaped Crack Under Inner Pressure in an Orthotropic Electroelastic Material. In: Abali, B. E. and Altenbach, H. and dell'Isola, F. and Eremeyev, V. A. and \"{O}chsner, A., New Achievements in Continuum Mechanics and Thermodynamics. Singapore: Springer Nature, 2019. 211--222 |
|---|
| 2019 | : Contributions to Advanced Dynamics and Continuum Mechanics. Springer, 2019 |
|---|
| 2019 | Burlayenko, V. N. and Altenbach, H. and Sadowski, T.: Dynamic Fracture Analysis of Sandwich Composites with Face Sheet/Core Debond by the Finite Element Method. In: Altenbach, H. and Belyaev, A. and Eremeyev, V. and Krivtsov, A. and Porubov, A., Dynamical Processes in Generalized Continua and Structures. Singapore: Springer, 2019. 163--194 |
|---|
| 2019 | : Dynamical Processes in Generalized Continua and Structures. Springer, 2019 |
|---|
| 2019 | : Higher Gradient Materials and Related Generalized Continua. Springer, 2019 |
|---|
| 2019 | Bagheri, B. and Schulze, S.-H. and Naumenko, K. and Altenbach, H.: Identification of traction-separation curves for self-adhesive polymeric films based on non-linear theory of beams and digital images of T-peeling. In: Composite Structures, 216, 2019, 222--227 |
|---|
| 2019 | M. A. Tolcha and H. Altenbach and G. S. Tibba: Modeling Fatigue Crack and Spalling for Rolling Die under Hot Milling. In: Fatigue \& Fracture of Engineering Materials \& Structures, 42, 2019, 2611-2624 |
|---|
| 2019 | : New Achievements in Continuum Mechanics and Thermodynamics. Springer Nature, 2019 |
|---|
| 2019 | : New {A}chievements in {C}ontinuum {M}echanics and {T}hermodynamics. Springer Nature, 2019 |
|---|
| 2019 | J. Eisentr\"{a}ger and K. Naumenko and H. Altenbach: Numerical Analysis of a Steam Turbine Rotor subjected to Thermo-Mechanical Cyclic Loads. In: Technische Mechnik, 19, 2019, 261-281 |
|---|
| 2019 | M. A. Tolcha and H. Altenbach: Numerical Modeling Rolling Contact Problem and Elasticity Deformation of Rolling Die under Hot Milling. In: Metals, 9, 2019, 24 |
|---|
| 2019 | Z. Javanbakht and M. A{\ss}mus and K. Naumenko and A. Öchsner and H. Altenbach: On Thermal Strains and Residual Stresses in the Linear Theory of Anti-Sandwiches. In: ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 99, 2019, e201900062 |
|---|
| 2019 | V. Rizov and H. Altenbach: On the Analysis of Lengthwise Fracture of Functionally Graded Round Bars . In: Structural Integrity and Life, 19, 2019, 102-108 |
|---|
| 2019 | R. Gl\"{u}ge and H. Altenbach and I. Kolesov and N. Mahmood and M. Beiner and R. Androsch: On the effective elastic properties of isotactic polypropylene. In: Polymer, 160, 2019, 291--302 |
|---|
| 2019 | : Recent Developments in the Theory of Shells. Springer, 2019 |
|---|
| 2019 | Michels, P. and Bruch, O. and {Ramakers-van Dorp}, E. and Altenbach, H.: Simulative und experimentelle Bestimmung der Bauteilschwindung von extrusionsblasgeformten Kunst\-stoff\-hohl\-kör\-pern. In: R. Kasper and {et al.}, 14. Magdeburger Maschinenbautage 2019. 2019. 198-208 |
|---|
| 2019 | : State of the Art and Future Trends in Material Modeling. Springer, 2019 |
|---|
| 2019 | S. Kostyrko and M. Grekov and H. Altenbach: Stress concentration analysis of nanosized thin-film coating with rough interface. In: Continuum Mechanics and Thermodynamics, 31, 2019, 1863-1881 |
|---|
| 2019 | M. A{\ss}mus and K. Naumenko and H. Altenbach: Subclasses of Mechanical Problems Arising from the Direct Approach for Homogeneous Plates. In: Altenbach, H. and Chr\'{o}\'{s}cielewski, J. and Eremeyev, V.A. and Wi\'{s}niewski, K., Recent Developments in the Theory of Shells. Singapore: Springer, 2019. 43--63 |
|---|
| 2019 | Gl\"{u}ge, R. and Mahmood, N. and Kolesov, I. and Altenbach, H. and Beiner, M. and Androsch, R.: The effect of the skin-core structure of injection-molded isotactic polypropylene on the stress distribution in bending tests. In: Technische Mechanik, 39, 2019, 252-260 |
|---|
| 2019 | H. Altenbach and K. Naumenko and D. Lavinsky and V. Konkin: The problems of transient heat transfer of electroconductive bodies in the electromagnetic field (in Ukrain.). In: Bulletin of the National Technical University KhPI - Dynamics and Strength of Machines, 1, 2019, 9-13 |
|---|
| 2019 | J. Eisentr\"{a}ger and K. Naumenko and Kostenko, Y. and H. Altenbach: Thermo-Mechanical Analysis of a Steam Turbine Rotor. In: PAMM, 19, 2019, e201900361 |
|---|
| 2019 | G. I. Mikhasev and H. Altenbach: Thin-walled Laminated Structures. Springer, 2019 |
|---|
| 2019 | H. Altenbach and D. Breslavsky and K. Naumenko and O. Tatarinova: Two-time-scales and time-averaging approaches for the analysis of cyclic creep based on Armstrong–Frederick type constitutive model. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233, 2019, 1690-1700 |
|---|
| 2018 | Kostyrko, S. A. and Grekov, M. A. and Altenbach, H.: A model of nanosized thin film coating with sinusoidal interface. In: AIP Conference Proceedings, 1959, 2018, 070017 |
|---|
| 2018 | : Advances in Mechanics of Materials and Structural Analysis. Springer, 2018 |
|---|
| 2018 | : Analysis and Modelling of Advanced Structures and Smart Systems. Springer, 2018 |
|---|
| 2018 | Yurkevich, K. and Bosiakov, S. and Altenbach, H.: Analytical Modelling of the Tooth Translational Motions: Comparative Analysis for Different Shapes of Root. In: Altenbach, H. and Jablonski, F. and Müller, W. and Naumenko, K. and Schneider, P., Advances in Mechanics of Materials and Structural Analysis. Cham: Springer, 2018. 449--461 |
|---|
| 2018 | Naumenko, K. and Altenbach, H.: Angular Velocities, Twirls, Spins and Rotation Tensors in the Continuum Mechanics Revisited. In: Altenbach, H. and Pouget, J. and Rousseau, M. and Collet, B. and Michelitsch, T., Generalized Models and Non-classical Approaches in Complex Materials Volume 1. Cham: Springer, 2018. 621--632 |
|---|
| 2018 | M. Wolff and M. B\"{o}hm and H. Altenbach: Application of the M\"{u}ller–Liu entropy principle to gradient-damage models in the thermo-elastic case. In: International Journal of Damage Mechanics, 27, 2018, 387--408 |
|---|
| 2018 | Altenbach, H. and Eremeyev, V.A.: Bending of a Three-Layered Plate with Surface Stresses. In: Altenbach, H. and Carrera, E. and Kulikov, G., Analysis and Modelling of Advanced Structures and Smart Systems. Singapore: Springer, 2018. 1--10 |
|---|
| 2018 | J. Eisentr\"{a}ger and K. Naumenko and H. Altenbach: Calibration of a phase mixture model for hardening and softening regimes in tempered martensitic steel over wide stress and temperature ranges. In: The Journal of Strain Analysis for Engineering Design, 53, 2018, 156-177 |
|---|
| 2018 | V. A. Kolupaev and M.-H. Yu and H. Altenbach and A. Bolchoun Comparison of Strength Criteria Based on the Measurements on Concrete. In: Journal of Engineering Mechanics, 144, 2018, 04018028 |
|---|
| 2018 | Chowdhury, H. and Naumenko, K. and Altenbach, H. and Krüger, M.: Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature. In: Archive of Applied Mechanics, 88, 2018, 65--81 |
|---|
| 2018 | L. Nazarenko and H. Stolarski and L. Khoroshun and H. Altenbach: Effective thermo-elastic properties of random composites with orthotropic components and aligned ellipsoidal inhomogeneities. In: International Journal of Solids and Structures, 136-137, 2018, 220--240 |
|---|
| 2018 | : Engineering Design Applications. Springer, 2018 |
|---|
| 2018 | : Generalized Models and Non-classical Approaches in Complex Materials Volume 1. Springer, 2018 |
|---|
| 2018 | : Generalized Models and Non-classical Approaches in Complex Materials Volume 2. Springer, 2018 |
|---|
| 2018 | : Improved Performance of Materials. Springer, 2018 |
|---|
| 2018 | M. Haghi and M. A{\ss}mus and K. Naumenko and H. Altenbach: Mechanical Models and Finite-Element Approaches for the Structural Analysis of Photovoltaic Composite Structures: A Comparative Study. In: Mekh. komp. mat., 54, 2018, 609--630 |
|---|
| 2018 | Eisenträger, J. and Naumenko, K. and Altenbach, H.: Numerical implementation of a phase mixture model for rate-dependent inelasticity of tempered martensitic steels. In: Acta Mechanica, 229, 2018, 3051–3068 |
|---|
| 2018 | L. Nazarenko and H. Stolarski and H. Altenbach: On modeling and analysis of effective properties of Carbon Nanotubes Reinforced Materials. In: Composite Structures, 189, 2018, 718--727 |
|---|
| 2018 | M. W. Wakjira and H. Altenbach and P. J. Ramulu: Optimization of manufacturing sustainability in the Ethiopian industries. In: Procedia Manufacturing, 21, 2018, 890 - 897 |
|---|
| 2018 | L. Nazarenko and H. Stolarski and H. Altenbach: Thermo-elastic properties of random composites with unidirectional anisotropic short-fibers and interphases. In: European Journal of Mechanics - A/Solids, 70, 2018, 249--266 |
|---|
| 2018 | Nordmann, J. and A{\ss}mus, M. and Altenbach, H.: Visualising elastic anisotropy: theoretical background and computational implementation. In: Continuum Mechanics and Thermodynamics, 136-137, 2018, 1--20 |
|---|
| 2017 | L. Nazarenko and H. Stolarski and H. Altenbach: A definition of equivalent inhomogeneity applicable to various interphase models and various shapes of inhomogeneity . In: Procedia IUTAM, 21, 2017, 63--70 |
|---|
| 2017 | M. A{\ss}mus and J. Nordmann and K. Naumenko and H. Altenbach: A homogeneous substitute material for the core layer of photovoltaic composite structures. In: Composites Part B: Engineering, 112, 2017, 353--372 |
|---|
| 2017 | L. Nazarenko and H. Stolarski and H. Altenbach: A model of cylindrical inhomogeneity with spring layer interphase and its application to analysis of short-fiber composites . In: Composite Structures, 160, 2017, 635--652 |
|---|
| 2017 | J. Eisentr\"{a}ger and K. Naumenko and H. Altenbach and E. Gariboldi: Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel. In: The Journal of Strain Analysis for Engineering Design, 52, 2017, 226--238 |
|---|
| 2017 | Eremeyev, V. and Altenbach, H.: Basics of Mechanics of Micropolar Shells. In: Altenbach, H. and Eremeyev, Victor, Shell-like Structures: Advanced Theories and Applications. Cham: Springer International Publishing, 2017. 63--111 |
|---|
| 2017 | M. A{\ss}mus and S. Bergmann and J. Eisenträger and K. Naumenko and H. Altenbach: Consideration of Non-Uniform and Non-Orthogonal Mechanical Loads for Structural Analysis of Photovoltaic Composite Structures. In: H. Altenbach and R. V. Goldstein and E. Murashkin, Mechanics for Materials and Technologies. Singapore: Springer, 2017. 73--122 |
|---|
| 2017 | S. Lychev and H. Altenbach: Growing Solids and Thin-Walled Structures. In: Procedia IUTAM, 23, 2017, 13--32 |
|---|
| 2017 | Berinskii, I. and Altenbach, H.: In-plane and out-of-plane elastic properties of two-dimensional single crystal. In: Acta Mechanica, 228, 2017, 683--691 |
|---|
| 2017 | M. A{\ss}mus and K. Naumenko and H. Altenbach: Mechanical Behaviour of Photovoltaic Composite Structures: Influence of Geometric Dimensions and Material Properties on the Eigenfrequencies of Mechanical Vibrations. In: Composites Communications, 6, 2017, 59--62 |
|---|
| 2017 | M. A{\ss}mus and S. Bergmann and K. Naumenko and H. Altenbach: Mechanical behaviour of photovoltaic composite structures: A parameter study on the influence of geometric dimensions and material properties under static loading . In: Composites Communications, 5, 2017, 23--26 |
|---|
| 2017 | : Mechanics for Materials and Technologies. Springer, 2017 |
|---|
| 2017 | V. N. Burlayenko and H. Altenbach and T. Sadowski and S. D. Dimitrova and A. Bhaskar: Modelling functionally graded materials in heat transfer and thermal stress analysis by means of graded finite elements. In: Applied Mathematical Modelling 45, 2017, 422--438 |
|---|
| 2017 | M. A{\ss}mus and J. Eisenträger and H. Altenbach: On isotropic linear elastic material laws for directed planes. In: W. Pietraszkiewicz and W. Witkowski, Proceedings of the 11th International Conference on Shell Structures: Theory and Applications (SSTA 2017). Gda\'{n}sk, Poland: 2017. 57--60 |
|---|
| 2017 | Chowdhury, H. and Altenbach, H. and Naumenko, K.: On the choice of the power law flow rule and its consequences in crystal plasticity. In: Key Engineering Materials, 725, 2017, 359--365 |
|---|
| 2017 | H. Altenbach and V. A. Eremeyev: On the elastic plates and shells with residual surface stresses . In: Procedia IUTAM, 21, 2017, 25--32 |
|---|
| 2017 | A{\ss}mus, M. and Eisentr\"{a}ger, J. and Altenbach, H.: Projector representation of isotropic linear elastic material laws for directed surfaces. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 97, 2017, 1625–1634 |
|---|
| 2017 | : Properties and Characterization of Modern Materials. Springer, 2017 |
|---|
| 2017 | H. Chowdhury and K. Naumenko and H. Altenbach and M. Kr{"{u}}ger: Rate dependent tension-compression-asymmetry of Ti-61.8at% Al alloy with long period superstructures at 1050$^0$C. In: Materials Science and Engineering: A, 700, 2017, 503--511 |
|---|
| 2017 | Eisentr\"{a}ger, J. and Naumenko, K. and Altenbach, H.: Robust approaches for the assesment of stress concentration in the creep range. In: A. Tonti and A. {di Gianfrancesco}, Creep \& Fracture in High Temperature Components - Design \& Life Assessment Issues, 3\textsuperscript{rd} ECCC Creep Conference. 2017. 493--501 |
|---|
| 2017 | : Shell-like Structures. Springer, 2017 |
|---|
| 2017 | Kostyrko, S. A. and Altenbach, H. and Grekov, M. A.: Stress concentration in ultra-thin coating with undulated surface profile. In: M. Papadrakakis and E. O{\~{n}}ate and B. A. Schrefler, Proc. VII Intern. Conf. on Coupled Problems in Science and Engng. 2017. 1183--1192 |
|---|
| 2017 | L. Nazarenko and H. Stolarski and H. Altenbach: Thermo-elastic properties of random particulate nano-materials for various models of interphase . In: International Journal of Mechanical Sciences 126, 2017, 130--141 |
|---|
| 2017 | Altenbach, H. and Eremeyev, V.: Thin-Walled Structural Elements: Classification, Classical and Advanced Theories, New Applications. In: Altenbach, H. and Eremeyev, V., Shell-like Structures: Advanced Theories and Applications. Cham: Springer International Publishing, 2017. 1--62 |
|---|
| 2016 | M. A{\ss}mus and K. Naumenko and H. Altenbach: A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules. In: Composite Structures, 158, 2016, 340--358 |
|---|
| 2016 | Lurie, S. and Belov, P. and Altenbach, H.: Classification of Gradient Adhesion Theories Across Length Scale. In: Altenbach, H. and Forest, Samuel, Generalized Continua as Models for Classical and Advanced Materials. Cham: Springer, 2016. 261--277 |
|---|
| 2016 | V. N. Burlayenko and H. Altenbach and T. Sadowski and S. D. Dimitrova: Computational simulations of thermal shock cracking by the virtual crack closure technique in a functionally graded plate. In: Computational Materials Science, 116, 2016, 11--21 |
|---|
| 2016 | H. Altenbach and G. I. Lvov and K. Naumenko and V. Okorokov: Consideration of damage in the analysis of autofrettage of thick-walled pressure vessels. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230, 2016, 3585--3593 |
|---|
| 2016 | L. Nazarenko and H. Stolarski and H. Altenbach: Effective properties of short-fiber composites with {G}urtin-{M}urdoch model of interphase. In: International Journal of Solids and Structures 97-98, 2016, 75--88 |
|---|
| 2016 | Kolupaev, V. A. and Yu, M.-H. and Altenbach, H.: Fitting of the strength hypotheses. In: Acta Mechanica, 227, 2016, 1533--1556 |
|---|
| 2016 | : Generalized Continua as Models for Classical and Advanced Materials. Springer, 2016 |
|---|
| 2016 | Altenbach, H. and Morachkovsky, O. and Naumenko, K. and Lavinsky, D.: Inelastic deformation of conductive bodies in electromagnetic fields. In: Continuum Mechanics and Thermodynamics, 28, 2016, 1421--1433 |
|---|
| 2016 | : Machining, Joining and Modifications of Advanced Materials. Springer, 2016 |
|---|
| 2016 | K. Naumenko and H. Altenbach: Modeling High Temperature Materials Behavior for Structural Analysis. Springer, 2016 |
|---|
| 2016 | G. S. Tibba and H. Altenbach: Modelling Creep Behaviour of Superheater Materials. In: Energy Procedia, 93, 2016, 197--202 |
|---|
| 2016 | Altenbach, H. and Eremeyev, V. A.: On Strain Rate Tensors and Constitutive Equations of Inelastic Micropolar Materials. In: Altenbach, H. and Forest, Samuel, Generalized Continua as Models for Classical and Advanced Materials. Cham: Springer, 2016. 1--13 |
|---|
| 2016 | Altenbach, H. and Eremeyev, V. A.: On the Variational Analysis of Vibrations of Prestressed Six-Parameter Shells. In: Mu{\~{n}}oz-Rojas, Pablo Andr{\'e}s, Computational Modeling, Optimization and Manufacturing Simulation of Advanced Engineering Materials. Cham: Springer, 2016. 3--19 |
|---|
| 2016 | C. Janousch and R. Winkler and M. Merkel and H. Altenbach and A. \"{O}chsner: On the isotropic and anisotropic thermal conductivity of metallic hollow sphere structures. In: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230, 2016, 789--798 |
|---|
| 2016 | Mikhasev, G. and Mlechka, I. and Altenbach, H.: Soft Suppression of Traveling Localized Vibrations in Medium-Length Thin Sandwich-Like Cylindrical Shells Containing Magnetorheological Layers via Nonstationary Magnetic Field. In: Awrejcewicz, Jan, Dynamical Systems: Theoretical and Experimental Analysis: {\L}{\'o}d{\'{z}}, Poland, December 7-10, 2015. Cham: Springer, 2016. 241--260 |
|---|
| 2016 | Sheydakov, D. N. and Altenbach, H.: Stability of inhomogeneous micropolar cylindrical tube subject to combined loads. In: Mathematics and Mechanics of Solids, 21, 2016, 1082--1094 |
|---|
| 2015 | Eisentr\"{a}ger, J. and Naumenko, K. and Altenbach, H. and Meenen, J.: A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory. In: Composite Structures, 133, 2015, 265--277 |
|---|
| 2015 | V. N. Burlayenko and H. Altenbach and T. Sadowski: An evaluation of displacement-based finite element models used for free vibration analysis of homogeneous and composite plates. In: Journal of Sound and Vibration, 358, 2015, 152--175 |
|---|
| 2015 | Naumenko, K. and Altenbach, H.: Analysis of Inelastic Behavior for High Temperature Materials and Structures. In: Altenbach, H. and Matsuda, T. and Okumura, D., From Creep Damage Mechanics to Homogenization Methods. Springer, 2015. 241--298 |
|---|
| 2015 | H. Altenbach and F. L\"{a}ngler and K. Naumenko and M. Ievdokymov: Analysis of casting materials under thermal fatigue. In: Applied Mechanics and Materials, 784, 2015, 95--103 |
|---|
| 2015 | Eisentr\"{a}ger, J. and Naumenko, K. and Altenbach, H. and K\"{o}ppe, H.: Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels. In: International Journal of Mechanical Sciences, 96--97, 2015, 163--171 |
|---|
| 2015 | : Applications of Computational Tools in Biosciences and Medical Engineering. Springer, 2015 |
|---|
| 2015 | Altenbach, H. and Eisentr\"{a}ger, J. and Naumenko, K.: Approximate Rules for Calculation of Notch Stresses Considering Plasticity and Creep. In: A.S. Khan, 21\textsuperscript{st} International Symposium on Plasticity \& Its Current Applications - Plastic Behavior of Conventional and Advanced Materials: Theory, Experiment, and Modeling. NEAT Press, 2015. 124--126 |
|---|
| 2015 | Altenbach, H. and Kolupaev, V. A.: Classical and Non-Classical Failure Criteria. In: Altenbach, H. and Sadowski, T., Failure and Damage Analysis of Advanced Materials. Springer, 2015. 1-66 |
|---|
| 2015 | Altenbach, H. and Girchenko, A. and Kutschke, A. and Naumenko, K.: Creep Behavior Modeling of Polyoxymethylene (POM) Applying Rheological Models. In: Altenbach, H. and Br\"{u}nig, M., Inelastic Behavior of Materials and Structures Under Monotonic and Cyclic Loading. Springer, 2015. 1-15 |
|---|
| 2015 | : Failure and Damage Analysis of Advanced Materials. Springer, 2015 |
|---|
| 2015 | : From Creep Damage Mechanics to Homogenization Methods. Springer, 2015 |
|---|
| 2015 | : Inelastic Behavior of Materials and Structures Under Monotonic and Cyclic Loading. Springer, 2015 |
|---|
| 2015 | : Mechanical and Materials Engineering of Modern Structure and Component Design. Springer, 2015 |
|---|
| 2015 | O. Ozhoga-Maslovskaja and K. Naumenko and H. Altenbach and O. Prygorniev: Micromechanical simulation of grain boundary cavitation in copper considering non-proportional loading. In: Computational Materials Science, 96, Part A, 2015, 178--184 |
|---|
| 2015 | Eremeyev, V. A. and Altenbach, H.: On the Direct Approach in the Theory of Second Gradient Plates. In: Altenbach, H. and Mikhasev, G. I., Shell and Membrane Theories in Mechanics and Biology. Springer, 2015. 147-154 |
|---|
| 2015 | Altenbach, H. and Eremeyev, V. A.: On the Theories of Plates and Shells at the Nanoscale. In: Altenbach, H. and Mikhasev, G. I., Shell and Membrane Theories in Mechanics and Biology. Springer, 2015. 25--57 |
|---|
| 2015 | Bobyr, M. and Altenbach, H. and Khalimon, O.: On the application of the continuum damage mechanics to multi-axial low-cyclic damage. In: Archive of Applied Mechanics, 85, 2015, 455--468 |
|---|
| 2015 | Altenbach, H. and Eremeyev, V. A.: On the constitutive equations of viscoelastic micropolar plates and shells of differential type. In: Mathematics and Mechanics of Complex Systems, 3, 2015, 273--283 |
|---|
| 2015 | Altenbach, H. and Eremeyev, V. A. and Naumenko, K.: On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 95, 2015, 1004--1011 |
|---|
| 2015 | Altenbach, H. and Naumenko, K. and L'vov, G. and Sukiasov, V. and Podgorny, A.: Prediction of Accumulation of Technological Stresses in a Pipeline Upon its Repair by a Composite Band. In: Mechanics of Composite Materials, 51, 2015, 139--156 |
|---|
| 2015 | Altenbach, H. and Naumenko, K. and L'vov, G. and Sukiasov, V. and Podgorny, A.: Prediction of Accumulation of Technological Stresses in a Pipeline Upon its Repair by a Composite Band (in Russ.). In: Mekh. komp. mat., 51, 2015, 197--222 |
|---|
| 2015 | : Shell and Membrane Theories in Mechanics and Biology. Springer, 2015 |
|---|
| 2014 | L\"{a}ngler, F. and Naumenko, K. and Altenbach, H. and Ievdokymov, M.: A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading. In: The Journal of Strain Analysis for Engineering Design, 49, 2014, 421-428 |
|---|
| 2014 | Altenbach, H. and Eremeyev, V. A.: Actual developments in the nonlinear shell theory - state of the art and new applications of the six-parameter shell theory. In: W. Pietraszkiewicz and J. G\'{o}rski, Shell Structures: Theory and Application. Taylor \& Francis, 2014. 3--12 |
|---|
| 2014 | Altenbach, H. and Eremeyev, Victor A.: Basic Equations of Continuum Mechanics. In: Altenbach, H. and \"{O}chsner, A., Plasticity of Pressure-Sensitive Materials. Springer, 2014. 1--47 |
|---|
| 2014 | Altenbach, H. and Kutschke, A. and Naumenko, K.: Constitutive Models for Creep-Damage Behavior at Quasi-Static and Cyclic Loading. In: A.S. Khan, 20\textsuperscript{th} International Symposium on Plasticity \& Its Current Applications - Multi-scale Modeling and Plasticity Characterization of Advanced Materials. 2014. 67--69 |
|---|
| 2014 | Vilchevskaya, E. N. and Ivanova, E. A. and Altenbach, H.: Description of liquid-gas phase transition in the frame of continuum mechanics. In: Continuum Mechanics and Thermodynamics, 26, 2014, 221-245 |
|---|
| 2014 | : Design and Computation of Modern Engineering Materials. Springer, 2014 |
|---|
| 2014 | Eremeyev, V. A. and Altenbach, H.: Equilibrium of a second-gradient fluid and an elastic solid with surface stresses. In: Meccanica, 49, 2014, 2635-2643 |
|---|
| 2014 | H. Altenbach: Holzmann/Meyer/Schumpich Technische Mechanik Festigkeitslehre. Springer Vieweg, 2014 |
|---|
| 2014 | Lvov, I. G. and Naumenko, K. and Altenbach, H.: Homogenisation approach in analysis of creep behaviour in multipass weld. In: Materials Science and Technology, 30, 2014, 50--53 |
|---|
| 2014 | Altenbach, H. and Beschetnikov, D. A. and Lvov, G. I. and Naumenko, K. and Sukiasov, V. G.: Kontaktwechselwirkung einer Rohrleitung mit der Reparaturbandage aus einem Kompositwerkstoff. In: Forschung im Ingenieurwesen, 78, 2014, 59--67 |
|---|
| 2014 | M. Ievdokymov and V. A. Eremeyev and H. Altenbach: Modeling of packaging behavior in closed-cell aluminum foam. In: PAMM, 14, 2014, 214--242 |
|---|
| 2014 | G. I. Mikhasev and H. Altenbach and E. A. Korchevskaya: On the influence of the magnetic field on the eigenmodes of thin laminated cylindrical shells containing magnetorheological elastomer . In: Composite Structures 113, 2014, 186--196 |
|---|
| 2014 | Altenbach, H. and Bolchoun, A. and Kolupaev, V. A.: Phenomenological Yield and Failure Criteria. In: Altenbach, H. and Öchsner, A., Plasticity of Pressure-Sensitive Materials. Berlin $\Cdot$ Heidelberg: Springer, 2014. 49--152 |
|---|
| 2014 | : Plasticity of Pressure-Sensitive Materials. Springer, 2014 |
|---|
| 2014 | H. Altenbach and V.A. Eremeyev: Strain rate tensors and constitutive equations of inelastic micropolar materials . In: International Journal of Plasticity, 63, 2014, 3--17 |
|---|
| 2014 | Altenbach, H. and Eremeyev, V. A.: Vibration analysis of non-linear 6-parameter prestressed shells. In: Meccanica, 49, 2014, 1751--1761 |
|---|
| 2013 | : Advanced Materials Modelling for Structures. Springer, 2013 |
|---|
| 2013 | : Advances in Bio-Mechanical Systems and Materials. Springer, 2013 |
|---|
| 2013 | Eisentr{\"{a}}ger, J. and Naumenko, K. and Altenbach, H. and Lenz, W.: Approximative methods to calculate notch stresses and strains for plasticity and creep. In: Forschung im Ingenieurwesen, 77, 2013, 71--80 |
|---|
| 2013 | : Characterization and Development of Biosystems and Biomaterials. Springer, 2013 |
|---|
| 2013 | Altenbach, H. and Eremeyev, V. A.: Cosserat Media. In: Altenbach, H. and Eremeyev, V. A., Generalized Continua from the Theory to Engineering Applications. Springer Vienna, 2013. 65--130 |
|---|
| 2013 | Altenbach, H. and B\^{i}rsan, M. and Eremeyev, V. A.: Cosserat-Type Rods. In: Altenbach, H. and Eremeyev, V. A., Generalized Continua from the Theory to Engineering Applications. Springer Vienna, 2013. 178--248 |
|---|
| 2013 | Altenbach, H. and Eremeyev, V. A.: Cosserat-Type Shells. In: Altenbach, H. and Eremeyev, V. A., Generalized Continua from the Theory to Engineering Applications. Springer, 2013. 131--178 |
|---|
| 2013 | : Design and Analysis of Materials and Engineering Structures. Springer, 2013 |
|---|
| 2013 | : Experimental and Numerical Investigation of Advanced Materials and Structures. Springer, 2013 |
|---|
| 2013 | V. A. Eremeyev and L. P. Lebedev and H. Altenbach: Foundations of Micropolar Mechanics. Springer, 2013 |
|---|
| 2013 | : Generalized Continua - from the Theory to Engineering Applications. Springer, 2013 |
|---|
| 2013 | : Generalized Continua as Models for Materials with Multi-scale Effects or Under Multi-field Actions. Springer, 2013 |
|---|
| 2013 | Altenbach, H. and Gorash, Y.: High-Temperature Inelastic Behavior of the Austenitic Steel AISI Type 316. In: Altenbach, H. and Kruch, S., Advanced Materials Modelling for Structures. Springer, 2013. 17-30 |
|---|
| 2013 | H. Altenbach and V. A. Eremeyev: Large deformations of inelastic shells. In: Key Engineering Materials, 535--536, 2013, 76--79 |
|---|
| 2013 | Zhilin, P. A. and Altenbach, H. and Ivanova, E. A. and Krivtsov, A.: Material Strain Tensor. In: Altenbach, H. and Forest, S. and Krivtsov, A., Generalized Continua as Models for Materials. Springer, 2013. 321-331 |
|---|
| 2013 | Altenbach, H. and Eremeyev, V. A. and Lebedev, L. P.: Mathematical Study of Boundary-Value Problems of Linear Elasticity with Surface Stresses. In: Altenbach, H. and Morozov, N. F, Surface Effects in Solid Mechanics. Springer, 2013. 1-19 |
|---|
| 2013 | Altenbach, H. and Eremeyev, V. A. and Morozov, N. F.: Mechanical Properties of Materials Considering Surface Effects. In: Cocks, A. and Wang, J., IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures. Springer, 2013. 105-115 |
|---|
| 2013 | Altenbach, H. and Lvov, I. and Naumenko, K.: Micro-Macro Analysis of Creep and Damage Behavior of Multi-Pass Weld. In: \protect{Z.} Zhou, Sixth International Conference on Nonlinear Mechanics. 2013. 3--9 |
|---|
| 2013 | Altenbach, H. and Eremeyev, V. A.: On the Continuum Mechanics Approach in Modeling Nanosized Structural Elements. In: \"{O}chsner, A. and Shokuhfar, A., New Frontiers of Nanoparticles and Nanocomposite Materials. Springer, 2013. 351--371 |
|---|
| 2013 | A. Girchenko and V. A. Eremeyev and H. Altenbach: On the Coupled Electromechanical Behavior of Artificial Materials with Chiral-Shell Elements. In: International Journal of Mechanical and Mechatronics Engineering, 7, 2013, 850 - 856 |
|---|
| 2013 | Altenbach, H. and Eremeyev, V. A. and Morozov, N. F.: On the Influence of Residual Surface Stresses on the Properties of Structures at the Nanoscale. In: Altenbach, H. and Morozov, N. F, Surface Effects in Solid Mechanics. Springer, 2013. 21-32 |
|---|
| 2013 | Altenbach, H. and Eremeyev, V. A.: On the constitutive equations of viscoelastic micropolar plates and shells. In: Proc. Indian National Sci. Acad. Part A, 79, 2013, 513--518 |
|---|
| 2013 | M. Birsan and H. Altenbach: On the {C}osserat model for thin rods made of thermoelastic materials with voids. In: Discrete and Continuous Dynamical Systems - Series S, 6, 2013, 1473--1485 |
|---|
| 2013 | Prygorniev, O. and Naumenko, K. and Altenbach, H.: Polycrystal vs. classical continuum models for structures. In: PAMM, 13, 2013, 255--256 |
|---|
| 2013 | Altenbach, H. and Eremeyev, V. A.: Shells and Plates with Surface Effects. In: Altenbach, H. and Forest, S. and Krivtsov, A., Generalized Continua as Models for Materials. Springer, 2013. 1--15 |
|---|
| 2013 | Altenbach, H. and Eremeyev, V.A.: Strain rate tensors in micropolar mechanics. In: A.S. Khan, 17\textsuperscript{th} International Symposium on Plasticity \& Its Current Applications - Analytical, Computational, and Experimental Inelasticity in Deformable Solids. 2013. 76--78 |
|---|
| 2013 | : Surface Effects in Solid Mechanics. Springer, 2013 |
|---|
| 2013 | Altenbach, H. and Eremeyev, V. A.: Surface Viscoelasticity and Effective Properties of Materials and Structures. In: Altenbach, H. and Kruch, S., Advanced Materials Modelling for Structures. Springer, 2013. 9--16 |
|---|
| 2013 | M. Weps and K. Naumenko and H. Altenbach: Unsymmetric three-layer laminate with soft core for photovoltaic modules . In: Composite Structures 105, 2013, 332--339 |
|---|
| 2013 | Kolupaev, V. A. and Yu, M.-H. and Altenbach, H.: Visualization of the Unified Strength Theory . In: Archive of Applied Mechanics, 83, 2013, 1061--1085 |
|---|
| 2013 | Kolupaev, V. A. and Bolchoun, A. and Altenbach, H.: Yield Criteria for Incompressible Materials in the Shear Stress Space. In: \"{o}chsner, A. and Altenbach, H., Experimental and Numerical Investigation of Advanced Materials and Structures. Springer, 2013. 107-119 |
|---|
| 2013 | Kolupaev, V. A. and Yu, M.-H. and Altenbach, H.: Yield criteria of hexagonal symmetry in the $\pi$-plane. In: Acta Mechanica, 224, 2013, 1527--1540 |
|---|
| 2012 | : Analysis and Design of Biological Materials and Structures. Springer, 2012 |
|---|
| 2012 | S.-H. Schulze and M. Pander and K. Naumenko and H. Altenbach: Analysis of laminated glass beams for photovoltaic applications. In: International Journal of Solids and Structures 49, 2012, 2027--2036 |
|---|
| 2012 | Altenbach, H.: Appendix A - On some developments in mechanics as a science. In: P.A. Zhilin and E.A. Ivanova and H. Altenbach and E.N. Vilchevskaya and S.N. Gavrilov and E.F. Grekova and A.M. Krivtsov, Rational Continuum Mechanics. Polytechnic university publisher, 2012. 407--413 |
|---|
| 2012 | Altenbach, H. and Eremeyev, V. A. and Ivanova, E. A. and Morozov, N. F.: Bending of a three-layer plate with near-zero transverse shear stiffness (in Russ.). In: Fizicheskaya Mezomekhanika (Physical Mesomechanics), 15, 2012, 15--19 |
|---|
| 2012 | Altenbach, H. and Dresbach, C. and Petzold, M.: Characterizing the Anisotropic Hardening Behavior of Aluminum Bonding Wires. In: \"{O}chsner, A. and {da Silva}, L. F. M. and Altenbach, H., Materials with Complex Behaviour II. Springer, 2012. 583--598 |
|---|
| 2012 | Kolupaev, V. A. and Altenbach, H.: Consistent view of generalised yield surfaces. In: A. S. Khan, 18\textsuperscript{th} International Symposium on Plasticity \& Its Current Applications - Non-linear Response of Conventional \& Advanced Materials, and Multi-scale Modeling. 2012. 76--78 |
|---|
| 2012 | O. Ozhoga-Maslovskaja and H. Altenbach and K. Naumenko and O. Prygorniev: Creep damage modeling of a polycrystalline material. In: PAMM, 12, 2012, 145--146 |
|---|
| 2012 | Altenbach, H.: Creep theory - from the classical to some actual models. In: unknown, Topical Problems of Continuum Mechanics - Proceedings of International Conference Dedicated to the 100$^t\mathrm{h}$ Anniversary of Academician Nagush Kh. Arutunyan. Yerevan: EGUAS, 2012. 71--75 |
|---|
| 2012 | M. B\^{i}rsan and H. Altenbach and T. Sadowski and V. A. Eremeyev and D. s: Deformation analysis of functionally graded beams by the direct approach. In: Composites Part B: Engineering 43, 2012, 1315--1328 |
|---|
| 2012 | A. A. Girchenko and V. A. Eremeyev and H. Altenbach: Interaction of a helical shell with a nonlinear viscous fluid . In: International Journal of Engineering Science 61, 2012, 53-58 |
|---|
| 2012 | H. Altenbach: Kontinuumsmechanik. Springer, 2012 |
|---|
| 2012 | : Materials with Complex Behaviour II. Springer, 2012 |
|---|
| 2012 | : Mechanics and Properties of Composed Materials and Structures. Springer, 2012 |
|---|
| 2012 | Altenbach, H. and Kozhar, S. and Naumenko, K.: Modeling Creep Ratcheting of an Aluminium-Silicon Eutectic Alloy. In: K. Maruyama and F. Abe and M. Igarashi and K. Kishida and M. Suzuki and K. Yoshimi, Proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11). 2012. C35 |
|---|
| 2012 | Altenbach, H. and Kozhar, S. and Naumenko, K.: Modeling creep damage of an aluminium-silicon eutectic alloy. In: C. L. Chow and J. W. Ju and D. M. \v{S}umarac, Proceedings The First International Conference on Damage Mechanics. 2012. 49--52 |
|---|
| 2012 | Altenbach, H. and Kozhar, S. and Naumenko, K.: Modeling creep damage of an aluminum-silicon eutectic alloy. In: International Journal of Damage Mechanics, 22, 2012, 683--698 |
|---|
| 2012 | Altenbach, H. and Gorash, Y.: Modeling of high-temperature inelastic behavior of the steel AISI type 316 using CDM approach. In: A.S. Khan, 18\textsuperscript{th} International Symposium on Plasticity \& Its Current Applications - Non-linear Response of Conventional \& Advanced Materials, and Multi-scale Modeling. 2012. 256--258 |
|---|
| 2012 | Y. Gorash and H. Altenbach and G. Lvov: Modelling of high-temperature inelastic behaviour of the austenitic steel AISI type 316 using a continuum damage mechanics approach. In: The Journal of Strain Analysis for Engineering Design, 47, 2012, 229--243 |
|---|
| 2012 | Altenbach, H. and B\^{i}rsan, M. and Eremeyev, V. A.: On a thermodynamic theory of rods with two temperature fields. In: Acta Mechanica, 223, 2012, 1583--1596 |
|---|
| 2012 | Zhilin, P.A.: Rational Continuum Mechanics (in Russ.). Polytechnic University Publisher, 2012 |
|---|
| 2012 | H. Altenbach and V. A. Eremeyev and N. F. Morozov: Surface viscoelasticity and effective properties of thin-walled structures at the nanoscale . In: International Journal of Engineering Science 59, 2012, 83--89 |
|---|
| 2012 | Morozov, N. F. and Altenbach, H. and Eremeyev, V. A.: Tasks of nanoporous objects nanomechanics. In: Vestnik Inzhekona - Seria tekhnicheskie nauki, 51, 2012, 3--5 |
|---|
| 2012 | Birsan, M. and Altenbach, H.: The Korn-type inequality in a Cosserat model for thin thermoelastic porous rods. In: Meccanica, 47, 2012, 789-794 |
|---|
| 2012 | B\^{i}rsan, M. and Altenbach, H.: The {K}orn-type inequality in a {C}osserat model for thin thermoelastic porous rods. In: Meccanica, 47, 2012, 789-794 |
|---|
| 2011 | Altenbach, H. and Becker, F.: A Constitutive Model for Strain Rate Hardening of Thermoplastics at Tension and Shear Load. In: A.S. Khan, 17\textsuperscript{th} International Symposium on Plasticity \& Its Current Applications - Macro to Nano-scale Inelastic Deformation and Failure of Materials \& Multi-scale Modeling. 2011. 91--93 |
|---|
| 2011 | Meenen, J. and Altenbach, H. and Eremeyev, V. and Naumenko, K.: A Variationally Consistent Derivation of Microcontinuum Theories. In: Altenbach, H. and Eremeyev, V. A., Shell-like Structures -- Non-classical Theories and Applications. Springer, 2011. 571-584 |
|---|
| 2011 | Naumenko, K. and Altenbach, H. and Kutschke, A.: A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature. In: International Journal of Damage Mechanics, 20, 2011, 578--597 |
|---|
| 2011 | C. Dresbach and G. Lorenz and M. Petzold and H. Altenbach: Analysis of chip damage risk in thermosonic wire bonding. In: Key Engineering Materials, 478, 2011, 75--80 |
|---|
| 2011 | M. B\^{i}rsan and H. Altenbach: Analysis of the Deformation of Multi-layered Orthotropic Cylindrical Elastic Shells Using the Direct Approach. In: H. Altenbach and V. A. Eremeyev, Shell-like Structures -- Non-classical Theories and Applications. Springer, 2011. 29--52 |
|---|
| 2011 | Schulze, S.-H. and Pander, M. and Naumenko, K. and Girchenko, A. and Altenbach, H.: Characterization of Polymeric Interlayers in Laminated Glass Beams for Photovoltaic Applications. In: Altenbach, H. and Eremeyev, V. A., Shell-like Structures -- Non-classical Theories and Applications. Springer, 2011. 499--506 |
|---|
| 2011 | Altenbach, H. and Eremeyev, V.A. and Kutschke, A. and Naumenko, K.: Conservation laws and prediction methods for stress concentration fields. In: Acta Mechanica, 218, 2011, 349-355 |
|---|
| 2011 | Bolchoun, A. and Kolupaev, V. A. and Altenbach, H.: Convex and non-convex flow surfaces. In: Forschung im Ingenieurwesen, 75, 2011, 73--92 |
|---|
| 2011 | K. Naumenko and H. Altenbach and A. Kutschke: Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature. In: Materials Research Innovations, 15, 2011, s205--s208 |
|---|
| 2011 | : Mechanics of Generalized Continua. Springer, 2011 |
|---|
| 2011 | Altenbach, H. and Eremeyev, V. A.: Mechanics of Viscoelastic Plates Made of FGMs. In: Mur\'{i}n, J. and Kompi\u{s}, V. and Kuti\u{s}, V., Computational Modelling and Advanced Simulations. Springer, 2011. 33--48 |
|---|
| 2011 | Altenbach, H.: Mechanics of advanced materials for lightweight structures. In: Proc. of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 255, 2011, 2481--2496 |
|---|
| 2011 | O. Ozhoga-Maslovskaja and H. Altenbach and K. Naumenko and O. Prygorniev and O. Vodka: Micromechanical creep model for pure copper. In: PAMM, 11, 2011, 419--420 |
|---|
| 2011 | Altenbach, H. and Eremeyev, V. A. and Lebedev, L. P.: Micropolar Shells as Two-dimensional Generalized Continua Models. In: Altenbach, H. and Maugin, G. A. and Erofeev, V., Mechanics of Generalized Continua. Springer, 2011. 23-55 |
|---|
| 2011 | Altenbach, H. and Eremeev, V.A. and Lebedev, L.P.: On eigen-frequencies of an elastic body with surface stresses. In: unknown, Actual problems in mechanics of continua - Proceedings of the XV\textsuperscript{th} International Conference. 2011. 258--262 |
|---|
| 2011 | B\^{i}rsan, M. and Altenbach, H.: On the dynamical theory of thermoelastic simple shells. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 91, 2011, 443--457 |
|---|
| 2011 | Altenbach, H. and Eremeyev, V. A.: On the inelastic constitutive equations of plates and shells made of foams. In: J. Li and Z. Li and X.-T. Feng and W. B. Lee and H. Zhou, Engineering Plasticity and Its Applications. 2011. 86--90 |
|---|
| 2011 | H. Altenbach and V. A. Eremeyev: On the shell theory on the nanoscale with surface stresses. In: International Journal of Engineering Science 49, 2011, 1294--1301 |
|---|
| 2011 | Altenbach, H. and Eremeyev, V.A. and Lebedev, L.P.: On the spectrum and stiffness of an elastic body with surface stresses. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 91, 2011, 699--710 |
|---|
| 2011 | M. B\^{i}rsan and H. Altenbach: On the theory of porous elastic rods. In: International Journal of Solids and Structures, 48, 2011, 910--924 |
|---|
| 2011 | B. Renner and H. Altenbach and K. Naumenko: Rotation of an axisymmetric particle in a plane flow. In: PAMM, 11, 2011, 333--334 |
|---|
| 2011 | : Shell-like Structures: Non-classical Theories and Applications. Springer, 2011 |
|---|
| 2011 | V. A. Kolupaev and A. Bolchoun and H. Altenbach: Strength hypothesis applied to hard foams. In: Applied Mechanics and Materials, 70, 2011, 99--104 |
|---|
| 2011 | B\^{i}rsan, M. and Altenbach, H.: Theory of thin thermoelastic rods made of porous materials. In: Archive of Applied Mechanics, 81, 2011, 1365-1391 |
|---|
| 2011 | Eitner, U. and Kajari-Schr\"{o}der, S. and K\"{o}ntges, M. and Altenbach, H.: Thermal Stress and Strain of Solar Cells in Photovoltaic Modules. In: Altenbach, H. and Eremeyev, V. A., Shell-like Structures -- Non-classical Theories and Applications. Springer, 2011. 453--468 |
|---|
| 2011 | Eitner, Ulrich and Pander, Matthias and Kajari-Schr{\"{o}}der, Sarah and K{\"{o}}ntges, Marc and Altenbach, H.: Thermomechanics of {PV} modules including the viscoelasticity of {EVA}. In: unknown, 26th European Photovoltaic Solar Energy Conference and Exhibition Proceedings. 2011. 3267--3269 |
|---|
| 2011 | Evdokymov, N. and Altenbach, H. and Eremeyev, V. A.: {Collapse criteria of foam cells under various loading}. In: PAMM, 11, 2011, 365--366 |
|---|
| 2011 | Gorash, Y. and Altenbach, H.: {Creep-fatigue analysis of the steel {AISI} type 316 component failure}. In: PAMM, 11, 2011, 373--374 |
|---|
| 2010 | Kozhar, S. and Regener, D. and Zak, H. and Altenbach, H.: A low cycle fatigue behaviour of a cast eutectic aluminium-silicon alloy {AlSi12CuNiMg} at elevated temperature. In: Giessereiforschung, 62, 2010, 26--31 |
|---|
| 2010 | M. B\^{i}rsan and H. Altenbach: A mathematical study of the linear theory for orthotropic elastic simple shells. In: Mathematical Methods in the Applied Sciences, 33, 2010, 1399--1413 |
|---|
| 2010 | Altenbach, H. and Eremeyev, V. A. and Lebedev, L. P. and Rend\'{o}n, L. A.: Acceleration waves and ellipticity in thermoelastic micropolar media. In: Archive of Applied Mechanics, 80, 2010, 217-227 |
|---|
| 2010 | Kolupaev, V. A. and Mohr-Matuschek, U. and Altenbach, H.: Application of Strength Hypotheses for POM. In: H.-J. Radusch and L. Fiedler, 14. International Scientific Conference on Polymeric Materials P.2010. 2010. 12 |
|---|
| 2010 | : Cellular and Porous Materials in Structures and Processes. Springer, 2010 |
|---|
| 2010 | B\^{i}rsan, M. and Altenbach, H.: Continous dependence and instability in the linear theory of elastic shells. In: W. Pietraszkiewicz and I. Kreja, Shell Structures: Theory and Application. Taylor \& Francis, 2010. 55--58 |
|---|
| 2010 | Kolupaev, V. A. and Bolchoun, A. and Altenbach, H.: Estimation of Viscoelastic Properties from Relaxation and Short-Time Tests. In: H.-J. Radusch and L. Fiedler, 14\textsuperscript{th} International Scientific Conference on Polymeric Materials P.2010. 2010. 7 |
|---|
| 2010 | Kr\"{o}ner, C. and Altenbach, H. and Naumenko, K. and Kutschke, A.: Generalised Fractional Elements in Rheological Modelling of Polymer Creep. In: D. A. Indeitsev and A. M. Krivtsov, Proc. of XXXVIII Summer School "'Advanced Problems in Mechanics"'. 2010. 398--404 |
|---|
| 2010 | : Materials with Complex Behaviour. Springer, 2010 |
|---|
| 2010 | Morozov, N. F. and Altenbach, H. and Eremeyev, V.A.: Mechanics of Solids with Surface Effects. In: A. O. Vatul'yan and M. Yu. Zhukov and A. V. Popov, Actual Problems in Continuum Mechanics. 2010. 222--226 |
|---|
| 2010 | Altenbach, H. and Kozhar, S. and Naumenko, K.: Modeling Creep Ratcheting of an Alminium-Silicon Eutectic Alloy. In: unknown, The Third International Conference \textsl{Nonlinear Dynamics}. EDENA, 2010. 449--454 |
|---|
| 2010 | Naumenko, K. and Altenbach, H. and Kutschke, A.: Modeling inelastic response of advanced steels at high temperature. In: unknown, Recent Advances in Mechanics, Proceedings of 7\textsuperscript{th} German-Greek-Polish Symposium. 2010. 77--79 |
|---|
| 2010 | Altenbach, H. and Kozhar, S. and Naumenko, K.: Modeling of low Cycle Fatigue for an Aluminium Alloy at Elevated Temperature. In: A. S. Khan and B. Farrokh, 16\textsuperscript{th} International Symposium on Plasticity \& Its Current Applications - Finite Plasticity and Viscoplasticity of Conventional and Emerging Materials. 2010. 22--24 |
|---|
| 2010 | Altenbach, H. and Eremeev, V. A. and Morozov, N. F.: On equations of the linear theory of shells with surface stresses taken into account. In: Mechanics of Solids, 45, 2010, 331--342 |
|---|
| 2010 | Altenbach, H. and Eremeev, V. A. and Morozov, N. F.: On equations of the linear theory of shells with surface stresses taken into account (in {R}uss.). In: Izv. RAN. Mekh. Tverd. Tela, 2010, 30--44 |
|---|
| 2010 | Altenbach, J. and Altenbach, H. and Eremeyev, V. A.: On generalized {C}osserat-type theories of plates and shells: a short review and bibliography. In: Archive of Applied Mechanics, 80, 2010, 73--92 |
|---|
| 2010 | Altenbach, H. and Eremeyev, V. A.: On the Cosserat-type Constitutive Equations in the Theory of Thin-Walled Structures. In: unknown, Proc. of 10\textsuperscript{th} Intern. Symposium on Plasticity and Impact (including Blast) Mechanics - IMPLAST 2010. 2010. 6 |
|---|
| 2010 | Altenbach, H. and Eremeyev, V. A. and M. M. Ievdokymov: On the Impact on a Plate made of Hyperelastic Foam. In: unknown, The Third International Conference \textsl{Nonlinear Dynamics}. EDENA, 2010. 236--241 |
|---|
| 2010 | Altenbach, H. and Eremeyev, V. A.: On the Oscillations of Nonlinear Magnetoelastic Solids. In: unknown, The Third International Conference \textsl{Nonlinear Dynamics}. EDENA, 2010. 230--235 |
|---|
| 2010 | Altenbach, H. and Eremeyev, V. A.: On the Theories of Plates Based on{~}the{~}Cosserat{~}Approach. In: Maugin, G. A. and Metrikine, A. V., Mechanics of Generalized Continua. Springer, 2010. 27--35 |
|---|
| 2010 | H. Altenbach and V. A. Eremeyev: On the effective stiffness of plates made of hyperelastic materials with initial stresses. In: International Journal of Non-Linear Mechanics 45, 2010, 976 - 981 |
|---|
| 2010 | Altenbach, H. and Eremeyev, V. A. and Lebedev, L. P.: On the existence of solution in the linear elasticity with surface stresses. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 90, 2010, 231--240 |
|---|
| 2010 | Altenbach, H. and Eremeyev, V. A.: On the shell and plate theories with surface stresses. In: W. Pietraszkiewicz and I. Kreja, Shell Structures: Theory and Application. Taylor \& Francis, 2010. 47--50 |
|---|
| 2010 | Kolupaev, V. A. and Bolchoun, A. and Altenbach, H.: Strength Hypotheses for Hard Polymeric Foams. In: H.-J. Radusch and L. Fiedler, 14\textsuperscript{th} International Scientific Conference on Polymeric Materials P.2010. 2010. 27 |
|---|
| 2010 | Altenbach, H.: Strength hypotheses - a never ending story. In: Czasopismo Techniczne, 107, 2010, 5--15 |
|---|
| 2010 | Altenbach, H. and Kutschke, A. and Naumenko, K.: Stress Range Dependent Creep \& Damage - Experimental Observations \& Phenomenological Description. In: A. S. Khan and B. Farrokh, 16\textsuperscript{th} International Symposium on Plasticity \& Its Current Applications - Finite Plasticity and Viscoplasticity of Conventional and Emerging Materials. 2010. 55--57 |
|---|
| 2010 | Kolupaev, V. A. and Bolchoun, A. and Altenbach, H.: Study of Time-Dependent Properties of Thermoplastics. In: unknown, EPJ Web of Conferences 6. 2010. 03003 |
|---|
| 2010 | Kolupaev, V. A. and Bolchoun, A. and Altenbach, H.: Testing of Multi-Axial Strength Behavior of Hard Foams. In: unknown, EPJ Web of Conferences 6. 2010. 16003 |
|---|
| 2010 | Altenbach, H. and Eremeyev, V. A.: Thin-walled Structures Made of Foams. In: Altenbach, H. and \"{O}chsner, A., Cellular and Porous Materials in Structures and Processes. Springer, 2010. 167-242 |
|---|
| 2010 | Kolupaev, V. A. and Altenbach, H.: {Einige "{U}berlegungen zur Unified Strength Theory von Mao-Hong Yu}. In: Forschung im Ingenieurwesen, 74, 2010, 135--166 |
|---|
| 2009 | Naumenko, K. and Altenbach, H. and Kutschke, A.: A constitutive model for creep and longterm strength in advanced heat resistant steels and structures. In: unknown, Proceedings of 7\textsuperscript{th} EUROMECH Solid Mechanics Conference. 2009. 1--14 |
|---|
| 2009 | Altenbach, H. and Eremeyev, V. A.: A new Model for Viscoelastic Plates made of FGMs. In: J. Murin and V. Kuti\v{s}) and R. \v{D}uri\v{s}, Proc. Computational Modelling and Advanced Simulations. 2009. 1--10 |
|---|
| 2009 | Kolupaev, V. A. and Bolchoun, A. and Altenbach, H.: Aktuelle Trends beim Einsatz von Festigkeitshypothesen. In: Konstruktion, 5, 2009, 59--66 |
|---|
| 2009 | Kolupaev, V.A. and Altenbach, H.: Anwendung der Unified Strength Theory (UST) von Mao-Hong Yu auf unverst\"{a}rkte Kunststoffe. In: unknown, 12. Tagung Problemseminar Deformation und Bruchverhalten von Kunststoffen. 2009. 320--339 |
|---|
| 2009 | Eremeyev, V. A. and Altenbach, H.: Configurational Forces in the Theory of Two-Phase Plates. In: Steinmann, P., IUTAM Symposium on Progress in the Theory and Numerics of Configurational Mechanics. Springer, 2009. 121-130 |
|---|
| 2009 | Kr\"{o}ner, C. and Altenbach, H. and Naumenko, K.: Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers: property prediction and transfer of results. In: Mekh. komp. mat., 45, 2009, 367--378 |
|---|
| 2009 | Naumenko, K. and Altenbach, H. and Gorash, Y.: Creep analysis with a stress range dependent constitutive model. In: Archive of Applied Mechanics, 79, 2009, 619-630 |
|---|
| 2009 | H. Altenbach and V. A. Eremeyev: Eigen-vibrations of plates made of functionally graded material. In: Computers, Materials, \& Continua, 9, 2009, 153--178 |
|---|
| 2009 | Kozhar, S. and Regener, D. and Altenbach, H.: Erm\"{u}dungsverhalten von AlSi12CuNiMg unter niederzyklischer Beanspruchung bei erh\"{o}hter Temperatur. In: M. Borsutzki and S. Geisler, Fortschritte der Kennwertermittlung f\"{u}r Forschung und Praxis - Tagung Werkstoffpr\"{u}fung 2009. Verlag Stahleisen, 2009. 163--168 |
|---|
| 2009 | Altenbach, H. and Kolupaev, V. A.: Fundamental Forms of Strength Hypotheses. In: D. A. Indeitsev and A. M. Krivtsov, Proc. of XXXVII Summer School "'Advanced Problems in Mechanics"'. 2009. 32--45 |
|---|
| 2009 | Altenbach, H. and Eremeyev, V. A. and Morozov, N. F.: Linear theory of shells taking into account surface stresses. In: Doklady Physics, 54, 2009, 531--535 |
|---|
| 2009 | Naumenko, K. and Altenbach, H.: Modeling of stress range dependent creep and damage for structural analysis. In: I.A. Shibli and S.R. Holdsworth, Creep \& Fracture in High Temperature Components - Design \& Life Assessment Issues, 2\textsuperscript{nd} ECCC Creep Conference. 2009. 974--984 |
|---|
| 2009 | H. Altenbach and V. Eremeyev and D. Indeitsev and E. Ivanova and A. Krivtsov: On the Contributions of Pavel Andreevich Zhilin to Mechanics. In: Technische Mechanik, 29, 2009, 115--134 |
|---|
| 2009 | Eremeyev, V. A. and Altenbach, H.: On the Eigenfrequencies of an Ordered System of Nanoobjects. In: Pyrz, R. and Rauhe, J. C., IUTAM Symposium on Modelling Nanomaterials and Nanosystems. Springer, 2009. 123--132 |
|---|
| 2009 | Altenbach, H. and Eremeyev, V. A.: On the bending of viscoelastic plates made of polymer foams. In: Acta Mechanica, 204, 2009, 137--154 |
|---|
| 2009 | Altenbach, H. and Eremeyev, V. A.: On the linear theory of micropolar plates. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 89, 2009, 242--256 |
|---|
| 2009 | H. Altenbach and V. A. Eremeyev: On the time-dependent behavior of FGM plates. In: Key Engineering Materials, 399, 2009, 63--70 |
|---|
| 2009 | H. Altenbach and V. A. Eremeyev: On the time-dependent behavior of {FGM} plates. In: Key Engineering Materials, 399, 2009, 63--70 |
|---|
| 2009 | Altenbach, H. and Brigadnov, I. and Naumenko, K.: Rotation of a slender particle in a shear flow: influence of the rotary inertia and stability analysis. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 89, 2009, 823--832 |
|---|
| 2009 | Altenbach, H.: Some remarks on the paper ''{A} unified tensor approach to the analysis of mechanical systems'' by {A. A. Fogarasy and M. R. Smith}. In: J. Mechanical Engineering Science, 223, 2009, 143--155 |
|---|
| 2009 | Altenbach, H. and Kolupaev, V.A.: The equivalent stress concept - past, present, and future. In: A.S. Khan and B. Farrokh, In: 15\textsuperscript{th} International Symposium on Plasticity \& Its Current Applications Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue, and Fracture. 2009. 88--90 |
|---|
| 2009 | V. A. Eremeyev and H. Altenbach and N. F. Morozov: The influence of surface tension on the effective stiffness of nanosize plates. In: Doklady Physics, 54, 2009, 98--100 |
|---|
| 2009 | V. A. Eremeyev and H. Altenbach and N. F. Morozov: The influence of surface tension on the effective stiffness of nanosize plates (in {R}uss.). In: Doklady Akademii Nauk, 424, 2009, 618--621 |
|---|
| 2009 | Kolupaev, V.A. and Bolchoun, A. and Altenbach, H.: Unified Representation and Evolution of the Strength Hypotheses. In: unknown, Proc. ICF Ottawa. 2009. 1--10 |
|---|
| 2009 | Altenbach, H. and Eremeyev, V. A.: {On the equations of the {C}osserat-type shells (in Russ.)}. In: Computational Continuum Mechanics, 2, 2009, 11--18 |
|---|
| 2008 | Altenbach, H.: Analysis of Homogeneous and Non-homogeneous Plates. In: R. de Borst and T. Sadowski, Lecture Notes on Composite Materials - Current Topics and Achievements. Springer, 2008. 1--36 |
|---|
| 2008 | Altenbach, H. and Gorash, Y. and Naumenko, K.: Creep analysis for a wide stress range based on relaxation data. In: International Journal of Modern Physics B, 22, 2008, 5413--5418 |
|---|
| 2008 | H. Altenbach and V. A. Eremeyev: Direct approach-based analysis of plates composed of functionally graded materials. In: Archive of Applied Mechanics, 78, 2008, 775--794 |
|---|
| 2008 | Altenbach, H. and Eremeyev, V. A.: Effective Properties of Plates made from Functionally Graded Materials. In: J. Warmi\'{n}ski and M.P. Cartmell and J. Latalski, Nonlinear Dynamics of Composite and Smart Structures - EUROMECH Colloquium 498 Conference Proceedings. 2008. 67--70 |
|---|
| 2008 | Altenbach, H. and Bolchoun, A. and Kolupaev, V. A.: Equivalent Stress Expressions for Isotropic Yield Behavior. In: unknown, Proc. of the Eighth International Conference on Fundamentals of Fracture (ICFF VII). 2008. 268--269 |
|---|
| 2008 | Altenbach, H. and Naumenko, K. and Pylypenko, S. and Renner, B.: Fibre rotation motion in homogeneous flows. In: A. Bertram and J. Tomas, Micro-Macro Interactions in Structured Media and Particle Systems. Springer, 2008. 139--150 |
|---|
| 2008 | Altenbach, H. and Eremeyev, V. A.: Mechanics of functionally graded plates made of foams. Mathematische Modellierung, Numerische Mechanik und Geophysik - Proc. VI\textsuperscript{th} School-Seminar (17.-20.12.2007 Rostov/Don). ZVVR, 2008. 5--39 |
|---|
| 2008 | Altenbach, H. and Eremeyev, V. A.: On the Application of Zhilin's Theory of Simple Shells to Plates made of Functionally Graded Materials. In: D.A. Indeitsev and A.M. Krivtsov, Proc. of XXXVI Summer School "'Advanced Problems in Mechanics"'. 2008. 8--49 |
|---|
| 2008 | Altenbach, H. and Meenen, J.: On the Different Possibilities to Derive Plate and Shell Theories. In: G. Jaiani and P. Podio-Guidugli, IUTAM Symposium on Relations of Shell, Plate, Beam, and 3D Models. Springer, 2008. 37--47 |
|---|
| 2008 | Altenbach, H. and Eremeyev, V. A.: On the analysis of viscoelastic plates made of functionally graded materials. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 88, 2008, 332--341 |
|---|
| 2008 | Altenbach, H. and Eremeyev, V. A.: On the constitutive inequalities and acceleration waves in micropolar media. In: PAMM, 8, 2008, 10417--10418 |
|---|
| 2008 | Altenbach, H. and Brigadnov, I. A. and Eremeyev, V. A.: Oscillations of a magneto-sensitive elastic sphere. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 88, 2008, 497--506 |
|---|
| 2008 | Altenbach, H. and Kolupaev, V. A.: Remarks on Model of Mao-Hong Yu. In: unknown, Proc. of the 8\textsuperscript{th} International Conference on Fundamentals of Fracture (ICFF VII). 2008. 270--271 |
|---|
| 2008 | Altenbach, H. and Gorash, Y. and Naumenko, K.: Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges. In: Acta Mechanica, 195, 2008, 263--274 |
|---|
| 2008 | Altenbach, H. and Bolchoun, A. and Kolupaev, V. A.: Systematization of Combined Yield and Fracture Criteria. In: unknown, Proc. of the Eighth International Conference on Fundamentals of Fracture (ICFF VII). 2008. 103--105 |
|---|
| 2008 | Sukiasov, V. and Altenbach, H. and Naumenko, K.: {Analytische N"{a}herungsl"{o}sung f"{u}r die viskoelastische Verformung d"{u}nnwandiger Bauteile}. In: Forschung im Ingenieurwesen, 72, 2008, 183-191 |
|---|
| 2007 | Altenbach, H. and Naumenko, K. and Pylypenko, S. and Renner, B.: Influence of rotary inertia on the fiber dynamics in homogeneous creeping flows. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 87, 2007, 81--93 |
|---|
| 2007 | H. Altenbach and K. Naumenko: Long term creep analysis of pipe bends in a steam transfer line at elevated temperature. In: Key Engineering Materials, 340--341, 2007, 795--802 |
|---|
| 2007 | K. Naumenko and H. Altenbach: Modeling of Creep for Structural Analysis. Springer, 2007 |
|---|
| 2007 | Y. Gorash and H. Altenbach and K. Naumenko: Modeling of primary and secondary creep for a wide stress range. In: PAMM, 7, 2007, 4040021-4040022 |
|---|
| 2007 | Altenbach, H. and Bolchoun, A. and Kolupaev, V.A.: Modelling Principles for Spatial Material Behavior. In: unknown, Proceedings International Conference on Multiaxial Fatigue and Fracture ICMFF8 - 2007. 2007. 1--8 |
|---|
| 2007 | Altenbach, H. and Bolchoun, A. and Kolupaev, V.A.: Models for spatial mechanical behaviour of non-reinforced thermoplastics. In: unknown, Tagungsskript 11. Tagung Deformation und Bruchverhalten von Kunststoffen. 2007. 316--323 |
|---|
| 2007 | H. Altenbach and K. Naumenko and Y. Gorash: Numerical benchmarks for creep-damage modeling. In: PAMM, 7, 2007, 4040021--4040022 |
|---|
| 2007 | Altenbach, H. and Eremeev, V.A.: On the bending of plates composed of gradient materials (in Russ.). In: unknown, Actual problems in mechanics of continua - Proceedings of the XI\textsuperscript{th} International Conference. 2007. 28--33 |
|---|
| 2007 | Altenbach, H. and Kolupaev, V.A.: On the unified representation of models for isotropic material behavior. In: unknown, Proc. of 9\textsuperscript{th} Intern. Symposium on Plasticity and Impact Mechanics - IMPLAST 2007. 2007. 351--360 |
|---|
| 2007 | Altenbach, H. and Kolupaev, V.A.: Potential based phenomenological models of the inelastic material behaviour. In: A. S. Khan and B. Farrokh, Plasticity of Conventional and Emerging Materials: Theory \& Applications. 2007. 244--246 |
|---|
| 2007 | Kireitseu, M.V. and Tomlinson, G. and Lu, J. and Altenbach, H. and Rongong, G. and Bochkareva, L. V. and Hui, David: Preliminary Results on Vibration Damping Properties of Nanoscale-Reinforced Composite Materials. In: unknown, European Nano Systems 2005, Paris, France, 14-16 December 2005. 2007. 1--6 |
|---|
| 2007 | Altenbach, H. and Fedorov, V. A.: {Structural elastic and creep models of a {UD} composite in longitudinal shear (in {R}uss.)}. In: Mekh. komp. mat., 43, 2007, 437--448 |
|---|
| 2007 | Altenbach, H. and Fedorov, V. A.: {Structural elastic and creep models of a {UD} composite in longitudinal shear}. In: Mechanics of Composite Materials, 43, 2007, 289--298 |
|---|
| 2006 | Altenbach, H. and Naumenko, K. and Zhilin, P. A.: A note on transversely-isotropic invariants. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 86, 2006, 162--168 |
|---|
| 2006 | L. Bochkareva and M. Kireitseu and G. Tomlinson and H. Altenbach and J. Lu: Advanced computational modeling of CNT-reinforced damping composite materials. In: \protect{The Minerals, Metals \& Materials Society}, TMS Annual Meeting. 2006. 49--58 |
|---|
| 2006 | Altenbach, H.: Advanced engineering creep analysis of structural elements. In: D. A. Indeitsev, Proc. of XXXIV\textsuperscript{th} Summer School "'Advanced Problems in Mechanics"'. 2006. 15--32 |
|---|
| 2006 | Altenbach, H. and Naumenko, K. and Pylypenko, P. and Renner, B.: Ausrichtung von Partikeln in station\"{a}ren Str\"{o}mungsfeldern. In: PMMM, 6, 2006, 423--424 |
|---|
| 2006 | L. Bochkareva and M. Kireitseu and G. Tomlinson and H. Altenbach and J. Lu: Computational modeling of damping behavior of CNT-reinforced composite materials. In: \protect{The Minerals, Metals \& Materials Society}, 135th TMS Annual Meeting, 2006. 2006. 59--68 |
|---|
| 2006 | Altenbach, H. and Naumenko, K.: Creep modeling and long term structural analysis of plates and shells. In: A. S. Khan and R. Kazmi, Anisotropy, Texture, Dislocations and Multiscale Modeling in Finite Plasticity \& Viscoplasticity, and Metal Forming. 2006. 580--582 |
|---|
| 2006 | Altenbach, H.: Failure criteria for composites - current state and future trends. In: T. Sadowski, IUTAM Symposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials. Springer, 2006. 285--292 |
|---|
| 2006 | H. Altenbach: Holzmann, Meyer, Schumpich Technische Mechanik Festigkeitslehre. Teubner, 2006 |
|---|
| 2006 | Bochkareva, L. V. and Kireitseu, M. V. and Kompis, V. and Altenbach, H. and Tomlinson, G. R.: Multiscale computational FEM-based engineering approach to modelling of damping behavior of CNT-reinforced composite materials. In: E. E. Gdoutos, Fracture of Nano and Engineering Materials and Structures. 2006. 43--44 |
|---|
| 2006 | Kireitseu, M. and Bochkareva, L.V. and Altenbach, H. and Tomlinson, G.: Multiscale modeling and simulation of nanoparticle-reinforeed damping materials. In: \protect{Nano Science and Technology Institute}, 2006 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2006 Technical Proceedings. 2006. 645-648 |
|---|
| 2006 | Altenbach, H.: On the contributions of P.A. Zhilin to the shell theory. In: D. A. Indeitsev, Proc. of XXXIV\textsuperscript{th} Summer School "'Advanced Problems in Mechanics"'. 2006. 1--14 |
|---|
| 2006 | Altenbach, H. and Naumenko, K. and Pylypenko, S. and Renner, B.: On the free particle rotation in a polymer melt. In: Strojn\'{\i}cky \v{C}asopis, 57, 2006, 112--126 |
|---|
| 2006 | Altenbach, H. and Moneke, M. and Kolupaev, V.A.: Phenomenological Material Models for Non-Reinforced Thermoplastics. In: unknown, 13\textsuperscript{th} International Conference on Deformation, Yield and Fracture of Polymers. 2006. 219--222 |
|---|
| 2006 | Kostenko, Y. and Lvov, G. and Gorash, E. and Altenbach, H. and Naumenko, K.: Power plant component design using creep-damage analysis. In: unknown, Proc. of 2006 ASME Int. Mech. Engng Congress and Exposition. 2006. 1--10 |
|---|
| 2006 | A. V. Shutov and H. Altenbach and K. Naumenko: Steady-state creep analysis of pressurized pipe weldments by perturbation method . In: International Journal of Solids and Structures 43, 2006, 6908--6920 |
|---|
| 2006 | Radusch, H.-J. and Kies, T. and Altenbach, H. and Naumenko, K.: {Beeinflussung des Schwindungsverhaltens von Thermoplasten beim Spritzgie{\ss}en durch elastische Werkzeugdeformation}. In: Zeitschrift Kunststofftechnik (Journal of Plastics Technology), 2, 2006, 1--21 |
|---|
| 2005 | Altenbach, H. and Naumenko, K. and Zhilin, P. A.: A direct approach to the formulation of constitutive equations for roads and shells. In: W. Pietraszkiewicz and C. Szymczak, Shell Structures: Theory and Application. Taylor \& Francis, 2005. 87--90 |
|---|
| 2005 | Naumenko, K. and Altenbach, H.: A phenomenological model for anisotropic creep in a multipass weld metal. In: Archive of Applied Mechanics, 74, 2005, 808--819 |
|---|
| 2005 | L. V. Bochkareva and M. V. Kireitseu and G. R. Tomlinson and H. Altenbach and V. Kompis and D. Hui: Computational Simulation and {3D} Virtual Reality Engineering Tools for Dynamical Modeling and Imaging of Composite Nanomaterials. In: \protect{TIMA Editions}, Dans European Nano Systems Worshop - ENS'05. 2005. 171--176 |
|---|
| 2005 | Kireitseu, M. and Kompis, V. and Altenbach, H. and Bochkareva, V. and Hui, D. and Eremeev, S.: Continuum Mechanics Approach and Computational Modelling of Submicrocrystalline and Nanoscale Materials. In: Fullerenes, Nanotubes and Carbon Nanostructures, 13, 2005, 313--329 |
|---|
| 2005 | Kies, T. and Altenbach, H. and Naumenko, K. and Radusch, H.-J.: Einfluss elastischer Werkstoffdeformationen auf das Schwindungsverhalten von Thermoplasten beim Spritzgie{\ss}en. In: unknown, Technomer. 2005. |
|---|
| 2005 | Altenbach, H.: Modelling of Anisotropic Behaviour in Fibre and Particle Reinforced Composites. In: T. Sadowski, Multiscale Modelling of Damage and Fracture Processes in Composite Materials. Springer, 2005. 1--62 |
|---|
| 2005 | Altenbach, H. and Naumenko, K.: Modelling of anisotropic creep in a multi-pass weld metal. In: A.S. Khan and A.M. Khoei, Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modelling. Neat Press, 2005. 385--387 |
|---|
| 2005 | Bochkareva, L. V. and Kireitseu, M. V. and Kompis, V. and Altenbach, H.: Multiscale computetional simulation and workbench tools for modelling of CNT-reinforced composite materials. In: unknown, International Congress of Nanotechnology. 2005. 1--12 |
|---|
| 2005 | Altenbach, H.: Nichtklassische Modellierungskonzepte f\"{u}r ebene Fl\"{a}chentragwerke. In: unknown, Proceedings, Volume 44, Book 2 Advanced Manufacturing Technologies. 2005. 743--746 |
|---|
| 2005 | Renner, B. and Altenbach, H. and Naumenko, K.: Numerical treatment of finite rotation for cylindrical particle. In: Technische Mechanik, 25, 2005, 151--161 |
|---|
| 2005 | Altenbach, H. and Naumenko, K. and Pylypenko, S.: On the numerical prediction of the anisotropic elastic properties in thin-walled structures made from short fiber reinforced plastics. In: Computer Assisted Mechanics and Engineering, 12, 2005, 87--97 |
|---|
| 2005 | Maksim V. Kireitseu and Geoffrey R. Tomlinson and J. Lu and H. Altenbach and R. Rongong and Liya V. Bochkareva and and David Hui: Preliminary Results on Vibration Damping Properties of Nanoscale-Reinforced Materials. In: \protect{TIMA Editions}, Dans European Nano Systems Worshop - ENS'05. 2005. 1--6 |
|---|
| 2005 | Gorash, Y. N. and Lvov, G. I. and Naumenko, K. V. and Altenbach, H. J.: {Analysis of high-temperature creep {T}-type junction of two pipes taking into account the anisotropic properties in weld zone (in Russ.)}. In: Dinamika i prochnost machin, 11, 2005, 9--18 |
|---|
| 2004 | Altenbach, H. and Gorazh, Y. and Naumenko, K.: A Phenomenological Model for Anisotropic Creep in a Multi-pass Weld Metal. In: unknown, 5\textsuperscript{th} German-Greek-Polish Symposium Advances in Mechanics. 2004. 5--7 |
|---|
| 2004 | Altenbach, H. and Naumenko, K.: Boundary layer in moderately thick plates under creep-damage conditions. In: S.N. Atluri and A.J.B. Tadeu, Advances in Computational \& Experimental Engineering \& Sciences - Proceedings of the 2004 ICCES. 2004. 2111--2116 |
|---|
| 2004 | Naumenko, K. and Altenbach, H. and Gorazh, Y.: Creep and Long Term Strength Analysis for Wide Stress Range. In: unknown, 6\textsuperscript{th} German-Greek-Polish Symposium Advances in Mechanics. 2004. 85--86 |
|---|
| 2004 | Altenbach, J. and Altenbach, H. and Naumenko, K.: Edge effects in moderately thick plates under creep-damage conditions. In: Technische Mechanik, 24, 2004, 254--263 |
|---|
| 2004 | Naumenko, K. and Altenbach, H.: Ein ph\"{a}nomenologisches Modell f\"{u}r anisotropes Krie\-chen in Schwei{\ss}n\"{a}hten. In: PAMM, 4, 2004, 227--228 |
|---|
| 2004 | H. Altenbach and J. Altenbach and W. Kissing: Mechanics of Composite Structural Elements. Springer, 2004 |
|---|
| 2004 | Holweg, K. and Brandt, J. and Bier\"{o}gel, C. and Grellmann, W. and Altenbach, H.: Sch\"{a}digungscharakterisierung der Implantat-Knochen-Grenzfl\"{a}che. In: D. Eifler, Grenzfl\"{a}chen bei Implantaten - mechanische und biologisch-chemische Aspekte - 4. Tagung des DVM-Arbeitskreises "`Biowerkstoffe"', DVM-Bericht 315. 2004. 9--17 |
|---|
| 2004 | Naumenko, K. and Altenbach, H.: Shell and Solid Type Finite Element Analysis of Creep in Thin-walled Structures. In: R. Kienzler and H. Altenbach and I. Ott, Critical Review of the Theories of Plates and Shells, New Applications. Springer, 2004. 165--176 |
|---|
| 2004 | Altenbach, H.: Simulation of the Material Behavior from the Engineering Point of View - Classical Approaches and New Trends. In: W. Hergert and A. Ernst and M. D\"{a}ne, Computational Materials Science: From Basic Principles to Material Properties. Springer, 2004. 235--257 |
|---|
| 2004 | H. Altenbach and P. A. Zhilin: The theory of simple elastic shells. In: R. Kienzler and I. Ott and H. Altenbach, Critical Review of the Theories of Plates and Shells, New Applications. Springer, 2004. 1--12 |
|---|
| 2004 | : Theories of Plates and Shells. Springer, 2004 |
|---|
| 2003 | Altenbach, H. and Naumenko, K. and Zhilin, P.A.: A micro-polar theory for binary media with application to flow of fiber suspensions. In: D. Indeitsev, Proc. of XXX\textsuperscript{th} Summer School-Conference "`Advanced Problems in Mechanics"'. 2003. 39--62 |
|---|
| 2003 | Altenbach, H. and Naumenko, K. and Zhilin, P. A.: A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions. In: Continuum Mechanics and Thermodynamics, 15, 2003, 539-570 |
|---|
| 2003 | Altenbach, H.: A unified phenomenological limit state criterion for ductile and brittle materials. In: N. K. Gupta, Plasticity and Impact Mechanics - Proceedings of 8\textsuperscript{th} International Symposium on IMPLAST 2003. 2003. 42--51 |
|---|
| 2003 | : Modern Trends in Composite Laminates Mechanics. Springer, 2003 |
|---|
| 2003 | Altenbach, H. and Naumenko, K. and Lvov, G. I. and Pilipenko, S. N.: Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics. In: Mechanics of Composite Materials, 39, 2003, 221--234 |
|---|
| 2003 | Altenbach, H. and Naumenko, K. and Lvov, G. I. and Pilipenko, S. N.: Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics (in Russ.). In: Mekh. komp. mat., 39, 2003, 333--352 |
|---|
| 2003 | Altenbach, H.: On the application of anisotropic creep models to the analysis of thin plates. In: A.S. Khan, Dislocations, Plasticity and Metal Forming. Fulton: Neat Press, 2003. 118--120 |
|---|
| 2003 | Altenbach, H.: On the extension of creep-damage theories for isotropic materials to the case of anisotropic materials. In: J. J. Skrzypek and A. Ganczarski, Anisotropic Behaviour of Damaged Materials. Springer, 2003. 261--294 |
|---|
| 2003 | H. Altenbach and J. Meenen: Single Layer Modelling and Effective Stiffness Estimations of Laminated Plates. In: H Altenbach and W Becker, Modern Trends in Composite Laminates Mechanics. Springer, 2003. 1--68 |
|---|
| 2003 | Altenbach, H.: Topical problems and applications of creep theory. In: International Applied Mechanics, 39, 2003, 631--655 |
|---|
| 2003 | Altenbach, H.: Topical problems and applications of creep theory (in {R}uss.). In: Prikl. Mekh., 39, 2003, 3--33 |
|---|
| 2003 | Altenbach, H. and Dyogtev, O. and Naumenko, K. and Zhilin, P.: {Ein mikro-polares Modell f"{u}r Fasersuspensionsstr"{o}mungen und dessen erste numerische Absch"{a}tzung}. In: PAMM, 3, 2003, 212--213 |
|---|
| 2002 | Altenbach, H.: Creep Analysis of Thin-Walled Structures. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 82, 2002, 507--533 |
|---|
| 2002 | Altenbach, H. and Huang, C. and Naumenko, K.: Creep-damage predictions in thin-walled structures by use of isotropic and anisotropic damage models. In: The Journal of Strain Analysis for Engineering Design, 37, 2002, 265-275 |
|---|
| 2002 | Altenbach, H. and Naumenko, K. and Lvov, G.I. and Pylypenko, S.: On the numerical estimation of fibre microstructure and elastic properties of injection molded thin-walled parts. In: H.-J. Radusch and L. Fiedler, Polymerwerkstoffe 2002. 2002. 466--469 |
|---|
| 2002 | H. Altenbach and K. Naumenko: Shear correction factors in creep-damage analysis of beams, plates and shells. In: JSME International Journal Series A Solid Mechanics and Material Engineering, 45, 2002, 77-83 |
|---|
| 2002 | Altenbach, H. and Naumenko, K. and Lvov, G. I. and Pilipenko, S. N.: {Numeriacal investigation of the elastic properties of short-fibre composite materials (in Russ.)}. In: Dinamika i prochnost machin, 8, 2002, 7--14 |
|---|
| 2001 | Meenen, J. and Altenbach, H.: A consistent deduction of von K{\'a}rm{\'a}n-type plate theories from three-dimensional nonlinear continuum mechanics. In: Acta Mechanica, 147, 2001, 1--17 |
|---|
| 2001 | Altenbach, H.: A generalized limit criterion with application to strength, yielding, and damage of isotropic materials. In: J. Lemaitre, Handbook of Materials Behavior Models. Academic Press, 2001. 175--186 |
|---|
| 2001 | Altenbach, H. and Tushtev, K.: A new static failure criterion for isotropic polymers. In: Mechanics of Composite Materials, 37, 2001, 475--482 |
|---|
| 2001 | Altenbach, H. and Tushtev, K.: A new static failure criterion for isotropic polymers (in Russ.). In: Mekh. komp. mat., 37, 2001, 731--742 |
|---|
| 2001 | Altenbach, H.: A non-classical model for creep-damage processes. In: D.A. Indeicev, Proc. of the XXVIII\textsuperscript{th} Summer School - Actual Problems in Mechanics. 2001. 187--204 |
|---|
| 2001 | Altenbach, H.: A nonclassical model for creep-damage processes. In: Mater. Phys. Mech., 3, 2001, 25--35 |
|---|
| 2001 | Altenbach, H. and Altenbach, J. and Kissing, W.: Bending of Beams and Plates Composed of Composite Materials. Lubielskie Towarzystwo Naukowe, 2001 |
|---|
| 2001 | Naumenko, K. and Altenbach, J. and Altenbach, H. and Naumenko, V. K.: Closed and approximate analytical solutions for rectangular Mindlin plates. In: Acta Mechanica, 147, 2001, 153--172 |
|---|
| 2001 | Altenbach, H.: Consideration of Stress State Influences in the Material Modelling of Creep and Damage. In: Murakami, S. and Ohno, N., IUTAM Symposium on Creep in Structures: Proceedings of the IUTAM Symposium held in Nagoya, Japan, 3--7 April 2000. Dordrecht: Springer Netherlands, 2001. 141--150 |
|---|
| 2001 | Korjakin, A. and Rikards, R. and Altenbach, H. and Chate, A.: Free damped vibrations of sandwich shells of revolution. In: Journal of Sandwich Structures and Materials, 3, 2001, 171-196 |
|---|
| 2001 | Naumenko, K. and Altenbach, H. and Huang, C. and Burlaenko, V.: Influence of the element type on the accuracy of creep-damage predictions in thin-walled structures. In: unknown, ECCM. 2001. |
|---|
| 2001 | Altenbach, H. and Huang, C. and Naumenko, K.: Modelling of the creep-damage under reversed stress states by considering damage activation and deactivation. In: Technische Mechanik, 21, 2001, 273--282 |
|---|
| 2001 | H. Altenbach and G. B. Stoychev and K. N. Tushtev: On elastoplastic deformation of grey cast iron. In: International Journal of Plasticity 17, 2001, 719--736 |
|---|
| 2001 | Altenbach, H. and Naumenko, K.: On the improvement of creep-damage analysis of thin-walled structures. In: unknown, Proc. of the 7\textsuperscript{th} International Conference on Creep and Fatigue at Elevated Temperatures. 2001. 513--518 |
|---|
| 2001 | Altenbach, H. and Kushnevsky, V. and Naumenko, K.: On the use of solid- and shell-type finite elements in creep-damage predictions of thinwalled structures. In: Archive of Applied Mechanics, 71, 2001, 164--181 |
|---|
| 2001 | Altenbach, J. and Altenbach, H.: Trends in engineering plate theories. In: Eksploatacja i Niezawodno{\'s}{\.{c}} Maintenance and Reliability, 8, 2001, 21--30 |
|---|
| 2001 | Altenbach, J. and Altenbach, H. and Naumenko, K.: Variational iteration for thin and moderatly thick plates. In: Building Research Journal, 49, 2001, 239--259 |
|---|
| 2001 | Altenbach, H. and Tushtev, K.: {Ein alternatives Flie{\ss}kriterium f"{u}r Graugu{\ss}eisen}. In: Forschung im Ingenieurwesen, 66, 2001, 179--184 |
|---|
| 2001 | Altenbach, H. and Tushtev, K.: {Ein alternatives Fließkriterium für Graugußeisen}. In: Forschung im Ingenieurwesen, 66, 2001, 179--184 |
|---|
| 2000 | J. Meenen and H. Altenbach: A general refined plate theory. In: ZAMM - Zeitschrift f\"{u}r Angewandte Mathematik und Mechanik, 80, 2000, 393--394 |
|---|
| 2000 | H. Altenbach: An alternative determination of transverse shear stiffnesses for sandwich and laminated plates. In: International Journal of Solids and Structures 37, 2000, 3503--3520 |
|---|
| 2000 | Sukiasov, V. G. and Altenbach, H. and Kushnevsky, V.: Analyse technologisch bedingter Spannungen und Verzerrungen in d\"{u}nnwandigen Bauteilen aus verst\"{a}rkten Kunststoffen. In: Forschung im Ingenieurwesen, 65, 2000, 207--216 |
|---|
| 2000 | Altenbach and H., Kushnevsky, V. and Lvov, G.I. and Sukiasov, V.G.: Analysis of the hardening process for thinwalled composite structures with a polymer matrix. In: H. M\"{u}nstedt and C. Gabriel and S. Rettenberger, Proceedings of the 3\textsuperscript{rd} International Conference. Mechanics of Time Dependent Materials. 2000. 178--180 |
|---|
| 2000 | Altenbach, H.: Creep analysis of thinwalled structures considering different structure mechanics models. In: A. Benallal, Continuous Damage and Fracture. 2000. 243--254 |
|---|
| 2000 | Altenbach, H. and Breslavsky, D. and Morachkovsky, O. and Naumenko, K.: Cyclic creep-damage in thin-walled structures. In: Journal of Strain Analysis for Engineering Design, 35, 2000, 1--12 |
|---|
| 2000 | Altenbach, H. and Kushnevsky, V. and Lvov, G.I. and Sukiasov, V.G.: Herstellungsbedingte Spannungen und Verzerrungen in d\"{u}nnwandigen Bauteilen aus faserverst\"{a}rkten Kompositwerkstoffen. In: W. Grellmann and H. Kausche and J. Kre\ss ler and J. Vogel, Polymerwerkstoffe 2000. 2000. 260--263 |
|---|
| 2000 | Nazarenko, V. M. and Bogdanov, V. L. and Altenbach, H.: Influence of initial stress on fracture of a halfspace containing a penny-shaped crack under radial shear. In: International Journal of Fracture, 104, 2000, 273--287 |
|---|
| 2000 | Altenbach, H. and Kolarov, G. and Morachkovsky, O. K. and Naumenko, K.: On the accuracy of creep-damage predictions in thinwalled structures using the finite element method. In: Computational Mechanics, 25, 2000, 87--98 |
|---|
| 2000 | H. Altenbach: On the determination of transverse shear stiffnesses of orthotropic plates. In: Zeitschrift f\"{u}r angewandte Mathematik und Physik ZAMP, 51, 2000, 629--649 |
|---|
| 2000 | Altenbach, H.: On the yield criteria depending on three invariants of the stress tensor. In: A.S. Khan and H. Zhang and Y. Yuan, Plastic and Viscoplastic Response of Materials and Metal forming. 2000. 395--397 |
|---|
| 1999 | Altenbach, J. and Altenbach, H. and Naumenko, K.: A phenomenological creep theory including nonclassical effects and creep-damage coupling. In: Appl. Mech. and Engng, 4, 1999, 11--16 |
|---|
| 1999 | Altenbach, H. and Deuring, P. and Naumenko, K.: A system of ordinary and partial differential equations describing creep behaviour of thin-walled shells. In: Zeitschrift f\"{u}r Analysis und ihre Anwendungen, 18, 1999, 1003--1030 |
|---|
| 1999 | Meenen, J. and Altenbach, H.: An extension of Pagano's analytical solution for layered structures to thermal loadings and arbitrary boundary conditions. In: J. J. Skrzypek and R. B. Hetnarski, Proceedings Thermal Stresses '99. 1999. 437--440 |
|---|
| 1999 | Altenbach, H.: Classical and Nonclassical Creep Models. In: H. Altenbach and J. J. Skrzypek, Creep and Damage in Materials and Structures. Springer, 1999. 45--96 |
|---|
| 1999 | : Creep and Damage in Materials and Structures. Springer, 1999 |
|---|
| 1999 | Altenbach, H.: Creep-damage behaviour of plates and shells. In: Mechanics of Time-Dependent Materials, 3, 1999, 103--123 |
|---|
| 1999 | Altenbach, H. and Naumenko, K.: On the creep of plates and shells made from materials with different behaviour in tension and compression. In: R. C. Picu and E. Krempl, Constitutive Laws for Engineering Materials IV. 1999. 123--126 |
|---|
| 1999 | Altenbach, H. and Wahren, G. and Nikitine, L.V.: Phenomenological Modelling of Deterioration of Metals Resulting from Environmental Influences. In: F. Ellyin and J. W. Provan, Progress in Mechanical Behaviour of Materials, Volume II: Material Properties. 1999. 586--591 |
|---|
| 1999 | Altenbach, H. and Kolarov, G. and Naumenko, K.: Solution of creep-damage problems for beams and rectangular plates using the Ritz and the finite element method. In: Technische Mechanik, 19, 1999, 249--258 |
|---|
| 1999 | Altenbach, H. and Naumenko, K.: Stress analysis of thin plates at elevated temperatures. In: J. J. Skrzypek and R. B. Hetnarski, Proceedings Thermal Stresses '99. 1999. 195--198 |
|---|
| 1999 | Naumenko, K. and Altenbach, J. and Altenbach, H.: {Variationsl"{o}sungen f"{u}r schubstarre Platten (I)}. In: Technische Mechanik, 19, 1999, 161--174 |
|---|
| 1999 | Naumenko, K. and Altenbach, J. and Altenbach, H.: {Variationsl"{o}sungen f"{u}r schubstarre Platten (II)}. In: Technische Mechanik, 19, 1999, 177--185 |
|---|
| 1998 | A. Korjakin and R. Rikards and A. Chate and H. Altenbach: Analysis of free damped vibrations of laminated composite conical shells . In: Composite Structures 41, 1998, 39--47 |
|---|
| 1998 | Altenbach, J. and Altenbach, H. and Naumenko, K.: Application of physically based creep damage equations to life-time predictions of Kirchhoff and v. K\'{a}rm\'{a}n plates. In: I. Emri, Proceedings of the 5\textsuperscript{th} European Rheology Conference. 1998. 90--91 |
|---|
| 1998 | Morachkovsky, O. and Altenbach, H. and Pasynok, M.: Computational modeling of creep damage evolution in transversally-isotropic structures. In: Dinamika i prochnost mashin., 56, 1998, 9--18 |
|---|
| 1998 | Altenbach, J. and Altenbach, H. and Naumenko, K.: Creep-Damage Analysis of von K\'{a}rm\'{a}n's Plates. In: Z. Mroz and T. Sadowski, Zagadnienia mechaniki p\c{e}kania i skrawania materialow. Lubielskie Towarzystwo Naukowe, 1998. 11--29 |
|---|
| 1998 | H. Altenbach and J. Altenbach and K. Naumenko: Ebene Fl\"{a}chentragwerke. Springer, 1998 |
|---|
| 1998 | H. Altenbach and J. Altenbach and K. Naumenko: Ebene Flächentragwerke. Springer, 1998 |
|---|
| 1998 | Kushnevsky, V. and Morachkovsky, O. and Altenbach, H.: Identification of effective properties of particle reinforced composite materials. In: Computational Mechanics, 22, 1998, 317--325 |
|---|
| 1998 | Altenbach, H.: Modellierung und Berechnung von Sandwich- und Laminattragwerken. In: H.-J. Radusch, Polymerwerkstoffe '98, Tagungsband 1 - Vortr\"{a}ge. 1998. 134--145 |
|---|
| 1998 | Altenbach, H.: Numerical life time estimation of thin shells and plates by use of mechanism based damage models. In: V. Kompi\v{s} and M. \v{Z}mind\'{a}k and B. Hu\v{c}ko, Numerical Methods in Continuum Mechanics '98. 1998. 219--224 |
|---|
| 1998 | Altenbach, H. and Breslavsky, D. and Morachkovsky, O. and Naumenko, K.: Simulation of cyclic creep-damage behaviour of thin-walled structures using asymptotic expansions. In: unknown, Proceedings of the EUROMECH Colloquium 385 - Inelastic Analysis of Structures under Variable Loads: Theory and Engineering Applications. 1998. 87--89 |
|---|
| 1998 | Meenen, J. and Altenbach, H.: Statically equivalent solutions for the assessment of refined plate theories. In: Mechanics of Composite Materials, 34, 1998, 331--342 |
|---|
| 1998 | Meenen, J. and Altenbach, H.: Statically equivalent solutions for the assessment of refined plate theories (in Russ.). In: Mekh. komp. mat., 34, 1998, 461--476 |
|---|
| 1998 | Haars, H. and Altenbach, H.: Stresses in a stepped laminate repair: a simplified model and comparison with FE-calculations. In: H.-J. Radusch, Polymerwerkstoffe '98, Tagungsband 1 - Vortr\"{a}ge. 1998. 174--182 |
|---|
| 1998 | Altenbach, H.: Theories for laminated and sandwich plates. In: Mechanics of Composite Materials, 34, 1998, 243--252 |
|---|
| 1998 | Altenbach, H.: Theories for laminated and sandwich plates (in {R}uss.). In: Mekh. komp. mat., 34, 1998, 333--348 |
|---|
| 1998 | Altenbach, H. and Naumenko, K. and Sichov, A.: {Analyse der Langzeitfestigkeit d"{u}nn\-wandiger Fl"{a}chentragwerke auf der Basis eines physikalisch begr"{u}ndeten Werkstoffmodells}. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 78, 1998, 225--226 |
|---|
| 1997 | Altenbach, H. and Naumenko, K.: Creep bending of thin-walled shells and plates by consideration of finite deflections. In: Computational Mechanics, 19, 1997, 490--495 |
|---|
| 1997 | Altenbach, H. and Morachkovsky, O. and Naumenko, K. and Sychov, A.: Geometrically nonlinear bending of thin-walled shells and plates under creep-damage conditions. In: Archive of Applied Mechanics, 67, 1997, 339--352 |
|---|
| 1997 | Altenbach, H. and Nast, E.: Multi-dimensional deformation tests of sandwich plates. In: Mechanics of Composite Materials, 33, 1997, 430--440 |
|---|
| 1997 | Altenbach, H. and Nast, E.: Multi-dimensional deformation tests of sandwich plates (in Russ.). In: Mekh. komp. mat., 33, 1997, 612--625 |
|---|
| 1997 | Altenbach, H. and Naumenko, K.: On creep damage evolution in thin plates. In: B.L. Karihaloo and Y.-W. Mai and M.I. Ripley and R.O. Ritchie, Advances in Fracture Research. 1997. 2243--2250 |
|---|
| 1997 | Altenbach, H. and Altenbach, J.: On the correctness of generalized isotropic constitutive equations and failure criteria. In: Mechanics of Composite Materials, 33, 1997, 1--6 |
|---|
| 1997 | Altenbach, H. and Altenbach, J.: On the correctness of generalized isotropic constitutive equations and failure criteria (in {R}uss.). In: Mekh. komp. mat, 33, 1997, 3--12 |
|---|
| 1997 | Altenbach, H. and Altenbach, J. and Naumenko, K.: On the long-time behaviour of creeping thin plates. In: Strojn\'{\i}cky \v{c}asopis, 48, 1997, 328-337 |
|---|
| 1997 | Altenbach, H. and Altenbach, J. and Naumenko, K.: On the prediction of creep damage by bending of thin-walled structures. In: Mechanics of Time-Dependent Materials, 1, 1997, 181--193 |
|---|
| 1997 | Altenbach, H. and Lvov, G. I. and Lysenko, S. V.: The shell theory including transverse shear deformations and thickness change. In: Mechanics of Composite Materials, 33, 1997, 543--552 |
|---|
| 1997 | Altenbach, H. and Lvov, G. I. and Lysenko, S. V.: The shell theory including transverse shear deformations and thickness change (in {R}uss.). In: Mekh. komp. mat., 33, 1997, 543--552 |
|---|
| 1997 | Kolarov, G. and Altenbach, H.: {Die Methode der Finiten Prismen bei anisotropen Materialeigenschaften}. In: Forschung im Ingenieurwesen, 63, 1997, 121-126 |
|---|
| 1997 | Altenbach, J. and Altenbach, H. and Naumenko, K.: {Lebensdauerabsch"{a}tzung d"{u}nn\-wan\-diger Fl"{a}\-chen\-tragwerke auf der Grundlage ph"{a}nomenologischer Materialmodelle f"{u}r Kriechen und Sch"{a}digung}. In: Technische Mechanik, 17, 1997, 353--364 |
|---|
| 1997 | Altenbach, H. and Morachkovsky, O. K and Naumenko, K. V.: {Modellierung des Kriechens d"{u}nner Platten unter Ber"{u}cksichtigung der Sch"{a}digung und gro\ss er Verschiebungen (in Russ.)}. In: Dinamika i prochnost mashin., 55, 1997, 3--9 |
|---|
| 1997 | Altenbach, H. and Morachkovsky, O. K and Naumenko, K. V.: {Modellierung des Kriechens dünner Platten unter Berücksichtigung der Schädigung und großer Verschiebungen (in Russ.)}. In: Dinamika i prochnost mashin., 55, 1997, 3--9 |
|---|
| 1996 | H. Altenbach and A. Zolochevsky: A generalized failure criterion for three-dimensional behaviour of isotropic materials. In: Engineering Fracture Mechanics, 54, 1996, 75--90 |
|---|
| 1996 | Altenbach, H. and Altenbach, J. and Rikards, R.: Einf\"{u}hrung in die Mechanik der Laminat- und Sandwichtrag\-werke. Deutscher Verlag f\"{u}r Grundstoffindustrie, 1996 |
|---|
| 1996 | Altenbach, H. and Altenbach, J. and Rikards, R.: Einführung in die Mechanik der Laminat- und Sandwichtragwerke. Deutscher Verlag für Grundstoffindustrie, 1996 |
|---|
| 1996 | Altenbach, H. and Zolochevsky, A.: Generalized fatigue limit criterion and unified theory of low cycle fatigue damage. In: Fatigue \& Fracture of Engineering Materials \& Structures, 19, 1996, 1207--1219 |
|---|
| 1996 | Altenbach, H. and Altenbach, J. and Naumenko, K.: Long-time-strength of thin plates (Modelling and analysis within the framework of continuum damage mechanics). In: V. Kompi\v{s} and M. \v{Z}mindak, Numerical Methods in Continuum Mechanics. 1996. 246--250 |
|---|
| 1996 | Altenbach, H.: Mathematical Modelling of Creep Processes in Metals. In: V. Kompi\v{s} and M. \v{Z}mind\'{a}k, Proceedings of the CEEPUS Summer School ”‘Analysis of Elastomers and Creep and Flow of Glass and Metals”. \v{Z}ilina: University of Transport and Communications, 1996. 139--188 |
|---|
| 1996 | Albracht, F. and Altenbach, H. and Nast, E.: On the Prediction of Effective Elastic Moduli of Honeycomp-Type Sandwich Plates. In: W. R. Blain and W. P. \protect{de Wilde}, Computer Aided Design in Composite Material Technology V. Computational Mechanics Publications, 1996. 81--90 |
|---|
| 1996 | Altenbach, H. and Haars, H.: Shear stress distribution in a repair of a fibre-reinforced composite plate. In: W. R. Blain and W. P. \protect{de Wilde}, Computer Aided Design in Composite Material Technology V. 1996. 133--142 |
|---|
| 1996 | Altenbach, H. and Morachkovsky, O. and Naumenko, K. and Sichov, A.: {Zum Kriechen d"{u}nner Rotationsschalen unter Einbeziehung geometrischer Nichtlinearit"{a}t sowie der Asymmetrie der Werkstoffeigenschaften}. In: Forschung im Ingenieurwesen, 62, 1996, 47-57 |
|---|
| 1995 | Altenbach, H. and Altenbach, J. and Zolochevsky, A.: A generalized constitutive equation for creep of polymers at multiaxial loading. In: Mechanics of Composite Materials, 31, 1995, 511--518 |
|---|
| 1995 | Altenbach, H. and Altenbach, J. and Zolochevsky, A.: A generalized constitutive equation for creep of polymers at multiaxial loading (in Russ.). In: Mekh. komp. mat., 31, 1995, 723--733 |
|---|
| 1995 | Altenbach, H. and Smirnov, S. A. and Kulik, V.: Analysis of a spherical crack on the interface of a two-phase composite. In: Mechanics of Composite Materials, 31, 1995, 11--19 |
|---|
| 1995 | Altenbach, H. and Smirnov, S. A. and Kulik, V.: Analysis of a spherical crack on the interface of a two-phase composite (in Russ.). In: Mekh. komp. mat., 31, 1995, 17--26 |
|---|
| 1995 | Altenbach, H. and Altenbach, J. and Zolochevsky, A.: Erweiterte Deformationsmodelle und Versagens\-kriterien der Werkstoffmechanik. Deutscher Verlag f\"{u}r Grundstoffindustrie, 1995 |
|---|
| 1995 | Altenbach, H. and Altenbach, J. and Zolochevsky, A.: Erweiterte Deformationsmodelle und Versagenskriterien der Werkstoffmechanik. Deutscher Verlag für Grundstoffindustrie, 1995 |
|---|
| 1995 | Altenbach, H. and Zolochevsky, A.: Generalized models of deformation and failure of materials with different behaviour in tension and compression. In: B. Xu and M. Tokuda and J. Song, Microstructures and Mechanical Properties of New Engineering Materials. 1995. 171--176 |
|---|
| 1995 | Altenbach, H. and Naumenko, K.: Geometrically nonlinear small strain creep theory for thin plates including isotropic damage. In: Mathematical Modelling and Scientific Computing, 5, 1995, 89--99 |
|---|
| 1995 | Altenbach, H. and Naumenko, K.: Mathematical modelling and numerical analysis of tertiary creep of rectangular thin plates. In: I. Emri and W.G. Knauss, Proceedings of the 1\textsuperscript{st} International Conference on Mechanics of Time Dependent Materials. 1995. 102--107 |
|---|
| 1995 | Altenbach, H. and Haars, H.: Modelling in a structure made of fibre-reinforced plastic. In: unknown, 3\textsuperscript{rd} International Conference on Deformation and Fracture of Composites. 1995. 508--517 |
|---|
| 1995 | Altenbach, H. and Zolochevsky, A.: On a generalized strength criterion for isotropic materials with loading dependent behaviour. In: unknown, 7\textsuperscript{th} International Conference on Mechanical Behaviour of Materials. 1995. 389--390 |
|---|
| 1995 | Altenbach, H. and Haars, H.: Stress state calculation of a repair of a uni- or biaxially loaded laminate structure. In: Mechanics of Composite Materials, 31, 1995, 255--265 |
|---|
| 1995 | Altenbach, H. and Haars, H.: Stress state calculation of a repair of a uni- or biaxially loaded laminate structure (in Russ.). In: Mekh. komp. mat., 1995, 351--362 |
|---|
| 1995 | Altenbach, H. and Moratschkowski, O. and Naumenko, K.: {Modellierung des Kriechens von Fl"{a}chentragwerken bei statischen und zyklischen Belastungen}. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 75, 1995, S175--S176 |
|---|
| 1995 | Altenbach, H. and Moratschkowski, O. and Naumenko, K.: {Modellierung des Kriechens von Flächentragwerken bei statischen und zyklischen Belastungen}. In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 75, 1995, S175--S176 |
|---|
| 1995 | Altenbach, H. and Haars, H.: {Reparaturen in Faserverbundstrukturen}. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 75, 1995, S139--S140 |
|---|
| 1994 | Altenbach, J. and Altenbach, H. and Matzdorf, V.: A generalized Vlasov theory for thin-walled composite beam structures. In: Mechanics of Composite Materials, 30, 1994, 43--54 |
|---|
| 1994 | Altenbach, J. and Altenbach, H. and Matzdorf, V.: A generalized {V}lasov theory for thin-walled composite beam structures (in {R}uss.). In: Mekh. komp. mat., 30, 1994, 57--71 |
|---|
| 1994 | Altenbach, H. and Zolochevsky, A. A.: A unified model of low cycle fatigue damage. In: unknown, Proc. of Fourth International Conference on Biaxial/Multiaxial Fatigue. St. Germain en Laye/France: 1994. 117--128 |
|---|
| 1994 | Altenbach, H. and Lysyak, I. and Zolochevsky, A.: Constitutive equations of creep for solids including second-order effects. In: C. Gallegos, Progress and Trends in Rheology IV - Proc. of the Fourth European Rheology Conference. 1994. 576 |
|---|
| 1994 | Altenbach, J. and Altenbach, H.: Einf\"{u}hrung in die Kontinuumsmechanik. Teubner, 1994 |
|---|
| 1994 | Altenbach, J. and Altenbach, H.: Einführung in die Kontinuumsmechanik. Teubner, 1994 |
|---|
| 1994 | Altenbach, H. and Zolochevsky, A.A.: Mathematical model of isotropic material behaviour including second-order-effects. In: I. Troch and F. Breitenecker, Proceedings of the IMACS Symposium "`1. MATHMOD"'. Wien: 1994. 180--183 |
|---|
| 1994 | Altenbach, H. and Altenbach, J. and Nast, E.: Modelling and analysis of multilayered shells based on a timoshenko-type theory with six degrees of freedom. In: Mechanics of Composite Materials, 29, 1994, 374--384 |
|---|
| 1994 | Altenbach, H. and Schie\ss e, P.: Modelling of the constitutive behaviour of materials with internal damage. In: W. Panasyuk and D.M.R. Taplin and M.C. Pandey and O.Ye. Andreykiv and R.O. Ritchie and J.F. Knott and P. Rama Rao, Advances in Fracture Resistance and Structural Integrity. Pergamon, 1994. 51--57 |
|---|
| 1994 | Altenbach, H. and Zolochevsky, A.A.: New model for determination of rupture time of materials with different behaviour in tension and compression. In: K.-H. Schwalbe and C. Berger, ECF 10 Structural Integrity Experiments - Models - Applications. 1994. 271--277 |
|---|
| 1994 | Altenbach, H. and Dutko, M. and Mur\'{\i}n, J. and Zolo\v{c}evsky, A.: O mo\v{z}nosti zov\v{s}eobecnenia klasick\'{y}ch pevnostn\'{y}ch hypot\'{e}z (\"{U}ber eine M\"{o}glichkeit der Verallgemeinerung klassischer Festigkeitskriterien - in Slovakisch). In: Strojn\'{\i}cky \v{c}asopis, 45, 1994, 418--427 |
|---|
| 1994 | Altenbach, H. and Dutko, M. and Murin, J. and Zolocevsky, A.: O moznosti zovseobecnenia klasickych pevnostnych hypotez (in Slovak.). In: Strojnicky Casopis, 45, 1994, 418--427 |
|---|
| 1994 | Altenbach, J. and Altenbach, H.: Phenomenological modelling of material behaviour in continuum mechanics - basic principles and new trends. In: Theoretical and Applied Mechanics, Development and Design of Mashines and Equipment, Technical University of Rousse, Scientific Works, XXXV, 1994, 9--17 |
|---|
| 1994 | Altenbach, H. and Naumenko, K.: Zum Kriechen d\"{u}nnwandiger Fl\"{a}chentragwerke unter Einbeziehung der Sch\"{a}digung sowie gro\ss er Verschiebungen. In: O. T. Bruhns, Gro\ss e plastische Form\-\"{a}n\-de\-rungen - Mitteilungen aus dem Institut f\"{u}r Mechanik der Ruhr-Universit\"{a}t Bochum. 1994. 67--70 |
|---|
| 1994 | Altenbach, H. and Zolochevsky, A. A.: {Eine energetische Variante der Theorie des Kriechens und der Langzeitfestigkeit f"{u}r isotrope Werkstoffe mit komplizierten Eigenschaften}. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 74, 1994, 189--199 |
|---|
| 1994 | Altenbach, H. and Zolochevsky, A. A.: {Eine energetische Variante der Theorie des Kriechens und der Langzeitfestigkeit für isotrope Werkstoffe mit komplizierten Eigenschaften}. In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 74, 1994, 189--199 |
|---|
| 1994 | Altenbach, H. and Kostenko, E. and Lvov, G.: {Zum Kriechen von Fl"{a}chentragwerken unter Einbeziehung der Querschubsteifigkeit}. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 74, 1994, T269--T270 |
|---|
| 1994 | Altenbach, H. and Kostenko, E. and Lvov, G.: {Zum Kriechen von Flächentragwerken unter Einbeziehung der Querschubsteifigkeit}. In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 74, 1994, T269--T270 |
|---|
| 1993 | Altenbach, J. and Kissing, W. and Altenbach, H.: D\"{u}nnwandige Stab- und Stab\-scha\-len\-tragwerke. Friedr. Vieweg \& Sohn Verlags-GmbH, 1993 |
|---|
| 1993 | Altenbach, J. and Kissing, W. and Altenbach, H.: Dünnwandige Stab- und Stabschalentragwerke. Friedr. Vieweg \& Sohn Verlags-GmbH, 1993 |
|---|
| 1993 | Altenbach, H. and Altenbach, J. and Nast, E.: Modelling and analysis of multilayered shells based on a timoshenko-type theory with six degrees of freedom (in {R}uss.). In: Mekh. komp. mat., 29, 1993, 500--511 |
|---|
| 1993 | Altenbach, H.: Werkstoffmechanik. Deutscher Verlag f\"{u}r Grundstoffindustrie, 1993 |
|---|
| 1993 | Altenbach, H. and Koczyk, S.: Zur Einbeziehung von Sch\"{a}digungen in Modelle der Plastomechanik. In: D. Besdo, Numerische Methoden in der Plastomechanik. Hannover: Institut f\"{u}r Mechanik, 1993. 195--204 |
|---|
| 1993 | Altenbach, J. and Altenbach, H. and Matzdorf, V.: {Anwendung von Stabmodellen bei der globalen Strukturanalyse d"{u}nnwandiger anisotroper Konstruktionen (in Russ.)}. In: Dinamika i prochnost mashin, 53, 1993, 3--16 |
|---|
| 1993 | Altenbach, H. and Lauschke, U. and Zolochevsky, A. A.: {Ein verallgemeinertes Versagenskriterium und seine Gegen"{u}berstellung mit Versuchsergebnissen}. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 73, 1993, T372--T375 |
|---|
| 1993 | Altenbach, H. and Lauschke, U. and Zolochevsky, A. A.: {Ein verallgemeinertes Versagenskriterium und seine Gegenüberstellung mit Versuchsergebnissen}. In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 73, 1993, T372--T375 |
|---|
| 1993 | Altenbach, H. and Fischer, U. and Kostenko, E.: {Untersuchung des Kriechverhaltens von Mehrschichtschalen mit Hilfe von Semiloof-Elementen}. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 73, 1993, T426--T429 |
|---|
| 1992 | Altenbach, J. and Altenbach, H. and Nast, E.: Aspekte der theoretischen Modellierung und der numerischen Berechnung mehrschichtiger Platten und Schalen. In: J. Eibl and H. Obrecht and P. Wriggers, Finite Elemente. Anwendungen in der Baupraxis. Ernst \& Sohn, 1992. 297--308 |
|---|
| 1992 | Altenbach, J. and Altenbach, H. and M\"{u}nch, C.: Behaviour of deformable solids under thermomechanical inputs. In: Mech. Solids, 27, 1992, 66--71 |
|---|
| 1992 | Altenbach, H. and Zolochevsky, A.: Energy version of creep and stress-rupture strength theory for anisotropic and isotropic materials which differ in resistance to tension and compression. In: Journal of Applied Mechanics and Technical Physics, 33, 1992, 101--106 |
|---|
| 1992 | Altenbach, J. and Altenbach, H. and M\"{u}nch, C.: {Das Verhalten fester deformierbarer K"{o}rper bei thermomechnischen Belastungen (in Russ.)}. In: Izv. AN SSSR. Mekh. tverd. tela, 1992, 71--74 |
|---|
| 1992 | Altenbach, H. and Zolochevsky, A.: {Eine energetische Variante der Theorie des Kriechens und der Langzeitfestigkeit f"{u}r anisotrope und isotrope Werkstoffe mit unterschiedlichen Eigenschaften bei Zug und Druck (in Russ.)}. In: Zhurnal prikladnoy mekhaniki i tekhnicheskoy fiziki, 1992, 114--120 |
|---|
| 1992 | Altenbach, H. and Krause, J. and Zolochevsky, A.: {Herleitung von Konstitutivgleichungen f"{u}r Werkstoffe mit komplizierten Eigenschaften}. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 72, 1992, T181--T183 |
|---|
| 1992 | Altenbach, H. and Krause, J. and Zolochevsky, A.: {Herleitung von Konstitutivgleichungen für Werkstoffe mit komplizierten Eigenschaften}. In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 72, 1992, T181--T183 |
|---|
| 1992 | Altenbach, H. and Altenbach, J. and Nast, E.: {Vergleichende Untersuchungen zur Modellierung und numerischen Berechnung mehrschichtiger Rotationsschalen}. In: Technische Mechanik, 13, 1992, 39--48 |
|---|
| 1992 | Altenbach, H. and Zolo\v{c}evskij, A. A.: {Zur Anwendung gemischter Invarianten bei der Formulierung konstitutiver Beziehungen f"{u}r gesch"{a}digte anisotrope Kontinua}. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 72, 1992, 375--377 |
|---|
| 1992 | Altenbach, H. and Zolo\v{c}evskij, A. A.: {Zur Anwendung gemischter Invarianten bei der Formulierung konstitutiver Beziehungen für geschädigte anisotrope Kontinua}. In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 72, 1992, 375--377 |
|---|
| 1991 | Altenbach, H. and Zolochevsky, A.: Allgemeine Werkstoffmodelle unter Einbeziehung von Sch\"{a}digungen. In: unknown, IX. Symposium "`Verformung und Bruch". Teil 1 (Plenarvortr\"{a}ge und Minisymposien). Magdeburg: 1991. 75--79 |
|---|
| 1991 | Altenbach, H. and Altenbach, J. and M\"{u}nch, C.: Analyse des Thermomechanischen Verhaltens von Fest\-k\"{o}rpern. In: Archive of Applied Mechanics, 61, 1991, 245--258 |
|---|
| 1991 | Regener, D. and Schick, E. and Altenbach., H. and Schie\ss e, P.: Einflu\ss\ des Gef\"{u}ges auf die Sch\"{a}\-di\-gungs\-ent\-wick\-lung eines duktilen Stahls. In: unknown, IX. Symposium "`Verformung und Bruch". Teil 1 (Plenarvortr\"{a}ge und Minisymposien). Magdeburg: 1991. 55--60 |
|---|
| 1991 | Altenbach, H. and Zolochevsky, A.: Kriechen d\"{u}nner Schalen aus anisotropen Werkstoffen mit unterschiedlichem Zug-Druckverhalten. In: Forschung im Ingenieurwesen, 57, 1991, 172--179 |
|---|
| 1991 | Altenbach, H.: Modeling of viscoelastic behaviour of plates. In: M. \.{Z}yczkowski, Creep in Structures. Springer, 1991. 531--537 |
|---|
| 1991 | Altenbach, H.: Numerical and experimental investigations of ductile steels including damage. In: M. Jono and T. Inoue, Mechanical Behaviour of Materials VI. Pergamon Press, 1991. 69--74 |
|---|
| 1991 | Altenbach, J. and Altenbach, H. and M\"{u}nch, C.: Some aspects of nonlinear thermomechanical structure analysis. In: O. Br\"{u}ller, V. Mannl and J. Najar, Advances in Continuum Mechanics. Springer, 1991. 407--415 |
|---|
| 1991 | Altenbach, H. and Zolo\v{c}evskij, A. A.: Verallgemeinerte Deformationsgesetze und Versagenskriterien f\"{u}r Werkstoffe, die im Experiment Effekte h\"{o}herer Ordnung aufweisen. In: O.T. Bruhns, Gro\ss e plastische Form\"{a}nderungen. Mitteilungen aus dem Institut f\"{u}r Mechanik der Ruhr-Universit\"{a}t Bochum. 1991. 31--33 |
|---|
| 1991 | H. Altenbach and J. Krause and A. Zolochevsky: {"{U}ber ein verallgemeinertes Versagenskriterium der Theorie des Grenzzustandes isotroper Werkstoffe}. In: Technische Mechanik, 12, 1991, 113--117 |
|---|
| 1991 | H. Altenbach and J. Altenbach and V. Matzdorf: {Anisotrope Stabschalenmodelle mit nichtsymmetrischem Wandaufbau}. In: Technische Mechanik, 12, 1991, 87--91 |
|---|
| 1991 | Pusch, G. and Ortmann, R. and Schick, E. and Altenbach, H. and Edel, K.-O.: {Anwendung der Bruchmechanik (in Russ.)}. In: Problemy mashinostroeniya i avtomatizacii, 1, 1991, 20--25 |
|---|
| 1991 | Altenbach, H.: {Konstitutivgleichungen im Rahmen direkt formulierter Plattentheorien}. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 71, 1991, T359-T361 |
|---|
| 1991 | Altenbach, H. and Schie{\ss}e, P. and Zolochevsky, A. A.: {Zum Kriechen isotroper Werkstoffe mit komplizierten Eigenschaften}. In: Rheologica Acta, 30, 1991, 388--399 |
|---|
| 1990 | Altenbach, H. and Blumenauer, H.: Werkstoffmechanische Modellierung von Bruch\-vor\-g\"{a}n\-gen. In: unknown, VI. Konferenz "Metallkundliche Probleme der Werkstoffentwicklung" - Modellierung metallkundlicher Prozesse. Freiberg: 1990. 212--225 |
|---|
| 1990 | H. Altenbach and M. Dankert and A. Zolo\u{c}evskij: {Anisotrope mathematisch-mechanische Modelle f"{u}r Werkstoffe mit von der Belastung abh"{a}ngigen Eigenschaften}. In: Technische Mechanik, 11, 1990, 5--13 |
|---|
| 1990 | Altenbach, H. and Altenbach, J. and Matzdorf, V.: {Grundlagen der Theorie anisotroper Schalen gro\ss er L"{a}nge (in Russ.)}. In: Dinamika i prochnost mashin, 52, 1990, 60--64 |
|---|
| 1990 | Altenbach, H. and Altenbach, J. and Matzdorf, V.: {Grundlagen einer verallgemeinerten halbmomentenfreien Schalentheorie f"{u}r d"{u}nnwandige, anisotrope Konstruktionen}. In: Techni\-sche Mechanik, 11, 1990, 23--35 |
|---|
| 1990 | Altenbach, H. and Altenbach, J. and Schie{\ss}e, P.: {Konzepte der Sch"{a}digungsmechanik und ihre Anwendung bei der werkstoffmechanischen Bauteilanalyse}. In: Technische Mechanik, 11, 1990, 81--93 |
|---|
| 1990 | H. Altenbach: {M"{o}glichkeiten der Modellierung des mechanischen Werkstoffverhaltens}. In: Wiss. Zeitschr. TU Magdebrg, 34, 1990, 6--13 |
|---|
| 1990 | H. Altenbach and Schie{\ss}e, P.: {Modelle der Sch"{a}digungsmechanik und ihre Anwendungen}. In: Schriftenreihe der TH Wismar, 1990, 40--43 |
|---|
| 1990 | Altenbach, H.: {Zu einigen Aspekten der klassischen Kontinuumsmechanik und ihrer Erweiterungen}. In: Technische Mechanik, 11, 1990, 95--105 |
|---|
| 1989 | Altenbach, J. and Altenbach, H. and Matzdorf, V.: Berechnung anisotroper d\"{u}nnwandiger St\"{a}be, die aus ebenen Streifen mit symmetrischem Querschnitt bestehen (in Russ.). In: Mekh. komp. mat., 1989, 641--649 |
|---|
| 1989 | Altenbach, H. and Altenbach, J. and Matzdorf, V.: Berechnungsmodelle f\"{u}r anisotrope Stabschalen. In: unknown, Internationales Schiffstechnisches Symposium: Heft 2 - Schiffbaumechanik. Rostock: 1989. 104--116 |
|---|
| 1989 | Altenbach, J. and Altenbach, H. and Matzdorf, V.: Design of anisotropic thin-walled rods consisting of flat strips of symmetrical cross section. In: Mechanics of Composite Materials, 25, 1989, 471--479 |
|---|
| 1989 | Altenbach, H.: Eine lineare Theorie f\"{u}r viskoelastische mehrschichtige Platten und Schalen (in Russ.). In: Dinamika i prochnost mashin, 50, 1989, 9--14 |
|---|
| 1989 | Altenbach, H. and Blumenauer, H.: Grundlagen und Anwendungen der Sch\"{a}\-di\-gungs\-mechanik. In: Neue H\"{u}tte, 34, 1989, 214--219 |
|---|
| 1989 | Altenbach, H. and Dankert, M. and Zolo\v{c}evskij, A. A.: Konstitutive Gleichungen der nichtli\-nearen Elastizit\"{a}tstheorie auf der Grundlage von 3 Invarianten des Spannungstensors. In: Technische Mechanik, 10, 1989, 211--217 |
|---|
| 1989 | Murin, J. and Dutko, M. and Altenbach, H.: Zur L\"{o}sung ebener und r\"{a}umlicher, geometrisch nichtlinearer Aufgaben mit Hilfe der Methode der finiten Elemente bei elastisch-plastischen Materialgesetzen mit kinematisch-isotroper Verfestigung. In: Technische Mechanik, 10, 1989, 85--91 |
|---|
| 1988 | Altenbach, H.: Determination of the reduced properties of multilayer viscoelastic sheets. In: Mechanics of Composite Materials, 24, 1988, 52--59 |
|---|
| 1988 | Altenbach, H.: Direct theory of viscoelastic plates. In: Mech. Solids, 23, 1988, 156--161 |
|---|
| 1988 | Altenbach, H. and Zhilin, P.A.: Eine allgemeine Theorie elastischer einfacher Schalen (in Russ.). In: Advances in Mechanics, 11, 1988, 107--148 |
|---|
| 1988 | Altenbach, H.: Eine direkt formulierte lineare Theorie f\"{u}r viskoelastische Platten und Schalen. In: Ingenieur-Archiv, 58, 1988, 215--228 |
|---|
| 1988 | Altenbach, H.: Eine direkte Theorie f\"{u}r viskoelastische Platten (in Russ.). In: Izv. AN SSSR. Mekh. tverd. tela, 1988, 164--169 |
|---|
| 1988 | Altenbach, H.: Ermittlung effektiver Eigenschaften f\"{u}r mehrschichtige viskoelastische Platten (in Russ.). In: Mekh. komp. mat., 1988, 58--66 |
|---|
| 1988 | Altenbach, H.: Modellierung des Deformationsverhaltens mehrschichtiger Fl\"{a}chentragwerke - ein \"{U}berblick zu Forschungsrichtungen und -tendenzen. In: Wiss. Z. der TU Magdeburg, 32, 1988, 86--94 |
|---|
| 1988 | Altenbach, H. and Matzdorf, V.: Zu einigen Anwendungen direkt formulierter Plattentheorien. In: Wiss. Z. der TU Magdeburg, 32, 1988, 95--99 |
|---|
| 1987 | H. Altenbach: Definition of elastic moduli for plates made from thickness-uneven anisotropic material. In: Mech. Solids, 22, 1987, 135--141 |
|---|
| 1987 | H. Altenbach: Die Ermittlung effektiver Eigenschaften f\"{u}r viskoelastische ebene Fl\"{a}chentragwerke. In: Technische Mechanik, 8, 1987, 33--39 |
|---|
| 1987 | H. Altenbach: Ermittlung der elastischen Steifigkeiten f\"{u}r Platten, die aus in Dickenrichtung inhomogenem anisotropen Material bestehen (in Russ.). In: Izv. AN SSSR. Mekh. tverd. tela, 1987, 139--146 |
|---|
| 1987 | Altenbach, H.: Zur Rheologie zweidimensionaler fester Kontinua. In: H. G\"{u}nther und J. Schneider, 2. Rheologie-Symposium der DDR. Karl-Marx-Stadt: 1987. 1-7 |
|---|
| 1986 | Altenbach, H.: Die Ermittlung effektiver Eigenschaften f\"{u}r viskoelastische Platten mit in Dickenrichtung inhomogenen Materialeigenschaften. In: Wiss. Z. der TH Magdeburg, 30, 1986, 116--119 |
|---|
| 1986 | H. Altenbach: Eine direkt formulierte Biegetheorie f\"{u}r viskoelastische Ein-und Mehrschichtschalen. In: Technische Mechanik, 7, 1986, 38--43 |
|---|
| 1986 | H. Altenbach: Konstitutive Gleichungen f\"{u}r viskoelastische ebene Fl\"{a}chentragwerke. In: Technische Mechanik, 7, 1986, 33--38 |
|---|
| 1985 | Altenbach, H.: Rheologische Modelle f\"{u}r geometrisch-lineare Cosserat-Platten. In: G. Landgraf, Studientexte Fl\"{a}chentragwerke IV. - Weiterbildungszentrum Fest\-k\"{o}r\-per\-mechanik, Konstruktion und rationeller Werkstoffeinsatz. Dresden: 1985. 30--38 |
|---|
| 1985 | Lvov, G. and Altenbach, H.: Untersuchung der Entlastungsprozesse bei elastisch-plastischer Formbildung d\"{u}nner Schalen. In: Technische Mechanik, 6, 1985, 22--26 |
|---|
| 1985 | Altenbach, H. and Fedorov, V. A.: Untersuchung des Randeffektes einer in Dickenrichtung inhomogenen Kreiszylinderschale (in Russ.). In: Dinamika i prochnost mashin, 42, 1985, 20--24 |
|---|
| 1985 | Altenbach, H.: Zur Theorie der Cosserat-Platten. In: Technische Mechanik, 6, 1985, 43--50 |
|---|
| 1985 | Altenbach, H.: Zur Theorie der inhomogenen Cosserat-Platten. In: ZAMM - Zeitschrift f\"{u}r angewandte Mathematik und Mechanik, 65, 1985, 638--641 |
|---|
| 1985 | Altenbach, H.: {Untersuchung von Querschwingungen ein- und mehrschichtiger Platten auf der Grundlage der linearen Theorie einfacher Schalen (in Russ.)}. In: Dinamika i prochnost mashin, 41, 1985, 47--51 |
|---|
| 1984 | Altenbach, H.: Analytische Modelle zur Beschreibung von in Dickenrichtung homogenen und inhomogenen dünnen Platten und Schalen. In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 64, 1984, M430 - M431 |
|---|
| 1984 | H. Altenbach: Die Grundgleichungen einer linearen Theorie f\"{u}r d\"{u}nne, elastische Platten und Scheiben mit inhomogenen Materialeigenschaften in Dickenrichtung. In: Technische Mechanik, 5, 1984, 51--58 |
|---|
| 1984 | Altenbach, H.: Zur Anwendung der Cosseratschen Modellvorstellungen \"{u}ber das Kontinuum bei der Formulierung allgemeiner Schalentheorien. In: Wiss. Z. der Universit\"{a}t Rostock - Naturwissenschaftliche Reihe, 34, 1984, 78--82 |
|---|
| 1983 | Altenbach, J. and Altenbach, H. and Kissing, W.: Formulierung eindimensionaler finiter Elemente auf der Basis einer halbmomentenfreien Schalentheorie nach Vlasov (in Russ.). In: Dinamika i prochnost mashin, 38, 1983, 32--36 |
|---|
| 1982 | Altenbach, H. and Shilin, P. A.: Bifurkation des Gleichgewichts eines dreischichtigen Streifens (in {R}uss.). In: Trudy Leningradskogo politekhnicheskogo instituta, 1982, 88--93 |
|---|
| 1982 | Altenbach, H. and Shilin, P. A.: Die Bestimmung der Deformationsenergie f\"{u}r dreischichtige, orthotrope, d\"{u}nne Schalen konstanter Dicke. In: Wiss. Z. der TH Magdeburg, 26, 1982, 7--10 |
|---|
| 1982 | Altenbach, H.: Die Ermittlung der Deformationsenergie für dünne Platten und Schalen mit in Dickenrichtung veränderlichen Materialeigenschaften. In: Wiss. Z. der TH Magdeburg, 28, 1982, 29--33 |
|---|
| 1982 | Altenbach, H. and Shilin, P.A.: Eine nichtklassische Theorie f\"{u}r ein- und mehrschichtige Schalen. In: G. Landgraf, Studientexte Fl\"{a}chentragwerke III. - Weiterbildungszentrum Fest\-k\"{o}r\-per\-mechanik, Konstruktion und rationeller Werkstoffeinsatz. Dresden: 1982. 21--34 |
|---|
| 1982 | H. Altenbach and P. Shilin: Eine nichtlineare Theorie d\"{u}nner Dreischichtschalen und ihre Anwendung auf die Stabilit\"{a}tsuntersuchung eines dreischichtigen Streifens. In: Technische Mechanik, 3, 1982, 23-30 |
|---|
| 1982 | Altenbach, H. and Zhilin, P. A.: On the stability of a three-layered strip (in Russ.). In: Wiss. Z. Hochschule für Architektur und Bauwesen, 28, 1982, 266-287 |
|---|
| 1982 | Palmow, W. A. and H. Altenbach: \"{U}ber eine Cosseratsche Theorie f\"{u}r elastische Platten. In: Technische Mechanik, 3, 1982, 5-9 |
|---|
| 1980 | Altenbach, H. and Zhilin, P.A.: Ermittlung der Steifigkeitsbeziehungen f\"{u}r Drei\-schicht\-schalen. In: unknown, Internationales Schiffstechnisches Symposium: Heft 2 - Spannungen und Verformungen des Schiffsk\"{o}rpers. Rostock: 1980. 63--71 |
|---|
