DEEN
Magazine Humboldt Kosmos Newsroom Newsletter

Search

Awards and fellowships Search Humboldtians

Search for tags

Prof. Abdel Salam Makhlouf

Profile

Academic positionAssociate Professor, Senior Lecturer, Reader
Research fieldsCoating and Surface Technology
Keywordsmagnesium alloys, self healing, coatings, corrosion, surface treatment

Current contact address

Host during sponsorship

Prof. Dr. Helmuth MöhwaldAbteilung Grenzflächen, Max-Planck-Institut für Kolloid- und Grenzflächenforschung, Potsdam
Start of initial sponsorship01/07/2009

Programme(s)

2009Georg Forster Research Fellowship Programme for Experienced Researchers

Publications (partial selection)

2024Makhlouf, Abdel S. H.: A Vision on Clemson Composite Center: Towards internationally recognized programs concerned with innovative research, and technology development. Invited Seminar: Clemson University, 5-7 February 2024, South Carolina, USA. 2024.
2024Soliman, Hanaa and Abdel Mouez, Fatma and Hussien, Hoda and Makhlouf, Abdel Salam and Wan, Guojiang: Comparing three strategies for surface treatment of Mg coated by hexamethylene diamine tetra methylene phosphonic acid for corrosion protection. In: Surface and Interface Analysis, 1, 2024, 62--69
2024Soliman, Hanaa and Makhlouf, Abdel Salam H and Rayan, Diaa: Dual-function film of ZnO doped into CrNi black coatings as solar absorbent and corrosion resistant. In: Applied Physics A, 130, 2024, 923
2024Soliman, Hanaa and Rayan, Diaa and Hamdy, Abdel Salam: Incorporation of ZnO into CrNi coatings for enhanced solar absorption and corrosion protection for renewable energy development. 2024,
2022Ali, G. A. M. and Thalji, Mohammad R. and Makhlouf, A.S.H.: Biodegradable Materials: Fundamentals, importance, and impacts. Handbook of Biodegradable Materials. https://doi.org/10.1007/978-3-030-83783-9\_74-1, Springer, 2022. 1--16
2022Shalan, A. E. and Makhlouf, A.S.H. and Lanceros-M{\'e}ndez, S.: Nanocomposites materials and their applications: Current and future trends. Advances in nanocomposite materials for environmental and energy harvesting applications. Springer, Germany, 2022. 3--14
2021Makhlouf, Abdel S. H.: A Vision on the Future of Materials Science and Engineering: Towards an internationally recognized programs concerned with innovative research, education and technology implementation. Invited Seminar, Missouri University of Science and Technology, 1-3 July 2021, USA. 2021.
2021Ali, Gomaa AM and Makhlouf, Abdel Salam Hamdy: Fundamentals of waste recycling for nanomaterial manufacturing. Waste Recycling Technologies for Nanomaterials Manufacturing. Springer International Publishing Cham, 2021. 3--24
2021Soliman, Hanaa and Makhlouf, Abdel Salam and Wan, Guojiang: Heat treatment of Hexa-Methylene Diamine Tetra-Methylene Phosphonic Acid (HMDTMPA) coating on biodegradable Mg to improve corrosion resistance and bioactivity. In: Surface Engineering, 2021, 1--11
2021Aboelazm, E. A. A. and Mohamed, N. and Ali, G. A. M. and Makhlouf, A.S.H. and Chong, K. F.: Recycling of cobalt oxides electrodes from spent Lithium-ion batteries by electrochemical method. Waste recycling technologies for nanomaterials manufacturing. Springer, ISBN 978-3-030-68030-5. doi.org/10.1007/978-3-030-68031-2, 2021.
2021Makhlouf, A.S. H. and Abdal-hay, A.: Surface modifications of biomedical devices. 5th Int'l Conference on Nanotechnologies and Biomedical Engineering (ICNBME), 3-5 November 2021, Chisinau, Moldova, https://icnbme.sibm.md/page/speakers-2/index.html. 2021.
2020Makhlouf, Abdel Salam: A vision on the future of Pearson Chair Program in Energy Materials. Invited Seminar, Mechanical Engineering Department, South Dakota School of Mines and Technology. 2020.
2020Makhlouf, Abdel Salam and Gajarla, Y.: Advances in smart coatings for magnesium alloys and their applications in industry. Advances in smart coatings and thin films for future industrial and biomedical engineering applications. Chapter 8, Elsevier, 2020. 245--261
2020Makhlouf, Abdel Salam and Rodriguez, R.: Bioinspired smart coatings and engineering materials for industrial and biomedical applications. Advances in smart coatings and thin films for future industrial and biomedical engineering applications. Chapter 14, Elsevier, 2020. 407--427
2020Soliman, Hanaa and Pu, Shimin and Zhang, Wentai and Makhlouf, Abdel Salam and Wan, Guojiang: Deposition of anti-corrosion hybrid film of hexamethylene diaminetetrakis (methylene phosphonic acid)/hydroxyapatite on biodegradable Mg: Influence of deposition procedures. In: Surface and Coatings Technology, 402, 2020, 126242
2020Gharaibeh, M. A. and Makhlouf, and A.S. Hamdy: Failures of Electronic Devices: Solder Joints Failure Modes, Causes and Detection Methods. Handbook of materials failure analysis with case studies from the textile and electronic industries. Elsevier, 2020. 1--20
2020Abu-Thabit, N. Y. and Makhlouf, A.S. H.: Fundamental of smart coatings and thin films: synthesis, deposition methods, and industrial applications. Advances in smart coatings and thin films for future industrial and biomedical engineering applications. Chapter 1, Elsevier, 2020. 3--35
2020Soliman, Hanaa and Qian, Junyu and Tang, Shuai and Chen, Yingqi and Makhlouf, Abdel-Salam and Wan, Guojiang and others: Hydroxyquinoline/nano-graphene oxide composite coating of self-healing functionality on treated Mg alloys AZ31. In: Surface and Coatings Technology, 385, 2020, 125395
2020Farag, MM and Liu, HH and Makhlouf, AH: New Nano-Bioactive Glass/Magnesium Phosphate Composites by Sol-Gel Route for Bone Defect Treatment. 2020,
2020Makhlouf, Abdel Salam and Prado, J.: Recent developments in smart coatings for steel alloys, their impact in the steel industry, and applications. Advances in smart coatings and thin films for future industrial and biomedical engineering applications. Chapter 2, Elsevier, 2020. 39--55
2020Makhlouf, A.S. H. and Abu-Thabit, N. Y. and Ferretiz, D.: Shape-memory coatings, polymers, and alloys with self-healing functionality for medical and industrial applications. Advances in smart coatings and thin films for future industrial and biomedical engineering applications. Chapter 12, Elsevier, 2020. 335--358
2020Maazinejad, Behanm and Mohammadnia, Osveh and Ali, Gomaa AM and Makhlouf, Abdel SH and Nadagouda, Mallikarjuna N and Sillanpää, Mika and Asiri, Abdullah M and Agarwal, Shilpi and Gupta, Vinod Kumar and Sadegh, Hamidreza: Taguchi L9 (34) orthogonal array study based on methylene blue removal by single-walled carbon nanotubes-amine: Adsorption optimization using the experimental design method, kinetics, equilibrium and thermodynamics. In: Journal of Molecular Liquids, 298, 2020, 112001
2020Makhlouf, Abdel Salam and Guerrero, E.: Toward smart and durable nanoceramic and nanobioceramic coatings and their medical and industrial applications. Advances in smart coatings and thin films for future industrial and biomedical engineering applications. Chapter 14, Elsevier, 2020. 383--405
2019Makhlouf, Abdel S. H.: A Vision on the Future of NOMATEN (Centre of Excellence in Multifunctional Materials for Industrial and Medical Applications). National Centre for Nuclear Research, 21-22 Jan 2019, Poland. 2019.
2019HAMDY MAKHLOUF, Abdel Salam and GAJARLA, Yashwanth: Advances in smart coatings for magnesium alloys and their applications in industry. In: Advances in Smart Coatings and Thin Films for Future Industrial and Biomedical Engineering Applications, 2019, 245--261
2019Abdal-hay, Abdalla and Agour, Mahmoud and Kim, Yu-Kyoung and Lee, Min-Ho and Hassan, Mohamed K and El-Ainin, H Abu and Hamdy, Abdel Salam and Ivanovski, Sa{\v{s}}o: Magnesium-particle/polyurethane composite layer coating on titanium surfaces for orthopedic applications. In: European Polymer Journal, 112, 2019, 555--568
2019Vanangamudi, Anbharasi and Yang, Xing and Duke, Mikel C and Dum{\'e}e, Ludovic F: Nanofibers for membrane applications. Handbook of Nanofibers. Springer, Cham, 2019. 937--960
2018Makhlouf, Abdel Salam H. and Herrera, V. and Mu{\~n}oz, and E.: Corrosion and Protection of the Metallic Structures in Petroleum Industry Due to Corrosion and the Techniques for Protection. Handbook of materials failure analysis with case studies from the construction industry. Butterworth-Heinemann, Elsevier, 2018. 107--122
2018Farahat, Mahmoud E and Hamdy Makhlouf, Abdel S: Corrosion resistant coatings based on synergistic effects of alkaline etching and molybdate treatment for AZ31D magnesium alloy. In: Transactions of the IMF, 96, 2018, 332--337
2018Makhlouf, A.S. Hamdy and Botello, and M.A.: Failure of the Metallic Structures Due to Microbiologically Induced Corrosion and the Techniques for Protection. Handbook of materials failure analysis with case studies from the construction industry,. Butterworth-Heinemann, Elsevier, 2018. 1--18
2018Makhlouf, Abdel Salam Hamdy and Herrera, V and Mu{\~n}oz, E: Handbook of materials failure analysis. In: Waltham: Butterworth-Heinemann, 2018,
2018Abu-Thabit, 44. N. Y. and Makhlouf, and A.S. Hamdy: Historical Development of Drug Delivery Systems: From Conventional Macroscale to Controlled, Targeted and Responsive Nanoscale Systems. Stimuli Responsive Polymeric Nanocarriers for Drug Delivery Applications”, Vol. 1: Types \& Triggers. Elsevier, 2018.
2018Sadegh, Hamidreza and Ali, Gomaa AM and Makhlouf, Abdel Salam Hamdy and Chong, Kwok Feng and Alharbi, Njud S and Agarwal, Shilpi and Gupta, Vinod Kumar: MWCNTs-Fe3O4 nanocomposite for Hg (II) high adsorption efficiency. In: Journal of Molecular Liquids, 258, 2018, 345--353
2018Makhlouf, Abdel Salam H and Botello, Martin A: microbiologically induced. In: Handbook of Materials Failure Analysis With Case Studies from the Construction Industries, 6, 2018,
2017Nekouei, Farzin and Kargarzadeh, Hanieh and Nekouei, Shahram and Keshtpour, Farzaneh and Makhlouf, Abdel Salam Hamdy: Efficient method for determination of methylene blue dye in water samples based on a combined dispersive solid phase and cloud point extraction using Cu (OH) 2 nanoflakes: central composite design optimization. In: Analytical and Bioanalytical Chemistry, 409, 2017, 1079--1092
2017Abdal-hay, Abdalla and Khalil, Khalil Abdelrazek and Hamdy, Abdel Salam and Al-Jassir, Fawzi F: Fabrication of highly porous biodegradable biomimetic nanocomposite as advanced bone tissue scaffold. In: Arabian Journal of Chemistry, 10, 2017, 240--252
2017Gupta, V. K. and Agarwal, S. and Sadegh, H. and Ali, G. A. M. and Bharti, A. K. and Hamdy Makhlouf, and A. S.: Facile route synthesis of novel graphene oxide--$\beta$-cyclodextrin nanocomposite and its application as adsorbent for removal of toxic bisphenol A from the aqueous phase. In: Journal of Molecular Liquids, 237, 2017, 466--472
2017Tyagi, I and Gupta, VK and Sadegh, Hamidreza and Ghoshekandi, R Shahryari and Makhlouf, AS Hamdy: Nanoparticles as adsorbent; a positive approach for removal of noxious metal ions: a review. 2017,
2017Sadegh, Hamidreza and Ali, Gomaa AM and Gupta, Vinod Kumar and Makhlouf, Abdel Salam Hamdy and Shahryari-ghoshekandi, Ramin and Nadagouda, Mallikarjuna N and Sillanpää, Mika and Megiel, El{\.z}bieta: The role of nanomaterials as effective adsorbents and their applications in wastewater treatment. In: Journal of Nanostructure in Chemistry, 7, 2017, 1--14
2016Sadegh, H. and Helmi, H. and Hamdy, A. S. and Masjedi, A. and Dastjerdi, M. J. H. and S-ghoshekandi, R.: A developed simple, facile, economic and fast technique for preparation of high quality Fe3O4 magnetic nanoparticles. In: Chemistry of Advanced Materials, 1, 2016, 27--32
2016Abdal-Hay, Abdalla and Hasan, Anwarul and Lee, Min-Ho and Hamdy, Abdel Salam and Khalil, Khalil Abdelrazek and others: Biocorrosion behavior of biodegradable nanocomposite fibers coated layer-by-layer on AM50 magnesium implant. In: Materials Science and Engineering: C, 58, 2016, 1232--1241
2016Abdal-Hay, Abdalla and Hasan, Anwarul and Kim, Yu-Kyoung and Lee, Min-Ho and Hamdy, Abdel Salam and Khalil, Khalil Abdelrazek: Corrigendum to “Biocorrosion behavior of biodegradable nanocomposite fibers coated layer-by-layer on AM50 magnesium implant”[Mater. Sci. Eng. C 58 (2016) 1232--1241]. In: Materials Science and Engineering: C, 61, 2016, 1029
2016Makhlouf, Abdel SH and Farahat, Ahmed Z: Determining the cause of a carbon steel joint failure in a gas flow pipeline production facility. Handbook of Materials Failure Analysis with Case Studies from the Oil and Gas Industry. Elsevier, 2016. 257--266
2016Soliman, H. and Hamdy, and A.S.: Effect of fluoride ions modifier and ceramic Al2O3 particles additives on plasma electrolytic oxidation of AZ31. In: Surface Engineering, 2016, 1--6
2016Agarwal, S. and Sadegh, H. and Monajjemi, M. and Hamdy, Abdel Salam and Ali, G. A.M. and Memar, A. O.H. and Shahryari-ghoshekandi, R. and Tyagi, I. and Gupta, V. K.: Efficient removal of toxic bromothymol blue and methylene blue from wastewater by polyvinyl alcohol. In: Journal of Molecular Liquids, 218, 2016, 191--197
2016Abdal-Hay, Abdalla and Hussein, Kamal Hany and Casettari, Luca and Khalil, Khalil Abdelrazek and Hamdy, Abdel Salam: Fabrication of novel high performance ductile poly (lactic acid) nanofiber scaffold coated with poly (vinyl alcohol) for tissue engineering applications. In: Materials science and engineering: C, 60, 2016, 143--150
2016Aliofkhazraei, Mahmood and Makhlouf, Abdel Salam Hamdy: Handbook of nanoelectrochemistry: electrochemical synthesis methods, properties, and characterization techniques. Springer, 2016
2016Nekouei, Farzin and Kargarzadeh, Hanieh and Nekouei, Shahram and Keshtpour, Farzaneh and Makhlouf, Abdel Salam Hamdy: Novel, facile, and fast technique for synthesis of AgCl nanorods loaded on activated carbon for removal of methylene blue dye. In: Process Safety and Environmental Protection, 103, 2016, 212--226
2016Abu-Thabit, Nedal and Makhlouf, Abdel Salam: Recent Approaches for Designing Nanomaterials-Based Coatings for Corrosion Protection. Handbook of Nanoelectrochemistry. Springer, Germany, 2016.
2016Heibati, Behzad and Ghoochani, Mahboobeh and Albadarin, Ahmad B and Mesdaghinia, Alireza and Makhlouf, Abdel Salam Hamdy and Asif, Mohammad and Maity, Arjun and Tyagi, Inderjeet and Agarwal, Shilpi and Gupta, Vinod Kumar: Removal of linear alkyl benzene sulfonate from aqueous solutions by functionalized multi-walled carbon nanotubes. In: Journal of molecular liquids, 213, 2016, 339--344
2016Hosseini, M and Farjadian, F and Makhlouf, Abdel Salam Hamdy: Smart stimuli-responsive polymeric based nano-sized hosts for drug delivery. Industrial Applications for Intelligent Polymers and Coatings. Springer, Germany, 2016. 1--26
2016Abu-Thabit, Nedal Y and Makhlouf, Abdel Salam Hamdy: Smart textiles supercapacitors coated with conducting polymers for energy storage applications. Industrial Applications for Intelligent Polymers and Coatings. Springer, Germany, 2016. 437--478
2016Abu-Thabit, Nedal Y and Hamdy, Abdel Salam: Stimuli-responsive Polyelectrolyte Multilayers for fabrication of self-healing coatings--A review. In: Surface and Coatings Technology, 303, 2016, 406--424
2016Gupta, VK and Moradi, O and Tyagi, I and Agarwal, S and Sadegh, H and Shahryari-Ghoshekandi, R and Makhlouf, ASH and Goodarzi, M and Garshasbi, A: Study on the removal of heavy metal ions from industry waste by carbon nanotubes: effect of the surface modification: a review. In: Critical Reviews in Environmental Science and Technology, 46, 2016, 93--118
2015Barhoum, Ahmed and Van Assche, Guy and Makhlouf, Abdel Salam Hamdy and Terryn, Herman and Baert, Kitty and Delplancke, Marie-Paule and El-Sheikh, Said M and Rahier, Hubert: A Green, Simple Chemical Route for the Synthesis of Pure Nanocalcite Crystals. In: Crystal Growth \& Design, 2015,
2015Hamdy, Abdel Salam and Abdel-hay, Abdalla: A Novel Composite Nanofibres-based Biomaterials for Biomedical Applications. The Latin America IdEA Partnership (“La Idea”) Incubator Program, Feb. 2-13, 2015, Advanced Manufacturing Session at the Coastal Bend Business Innovation Center hosted by Texas A\&M University in Corpus Cristi, Texas. USA.. 2015. 1
2015Zare, Karim and Gupta, Vinod Kumar and Moradi, Omid and Makhlouf, Abdel Salam Hamdy and Sillanpää, Mika and Nadagouda, Mallikarjuna N and Sadegh, Hamidreza and Shahryari-Ghoshekandi, Ramin and Pal, Angshuman and Wang, Zhou-jun and others: A comparative study on the basis of adsorption capacity between CNTs and activated carbon as adsorbents for removal of noxious synthetic dyes: a review. In: Journal of nanostructure in chemistry, 5, 2015, 227--236
2015Abdal-hay, Abdalla and Hamdy, Abdel Salam and Abdel-Jaber, GT and Barakat, Nasser AM and Ebnalwaled, AA and Khalil, Khalil Abdelrazek: A facile manufacturing of Ag/SiO2 nanofibers and nanoparticles composites via a simple hydrothermal plasma method. In: Ceramics International, 41, 2015, 12447--12452
2015Hamdy, Abdel Salam and Hussien, H. M. and Attia, E: A simple single-step permanganate surface treatment for rare-earth containing magnesium alloys. In: Protection of Metals and Physical Chemistry of Surfaces, 51, 2015, 613--619
2015Soliman, H and Salam, Hamdy Abdel: Comparative study of micro-arc oxidation treatment for AM, AZ and MZ magnesium alloys. In: Protection of Metals and Physical Chemistry of Surfaces, 51, 2015, 620
2015Ghanem, W.A. and Hamdy, A.S. and Attia, E. M. and Hussien, H. M.: Deposition, characterization and electrochemical properties of tungstate-based coating treatments over ZE41 Mg-Zn-rare-earth alloy. 4th International Conference on Corrosion Mitigation and Surface Protection Technologies, 14-17 Dec 2015, Seagull Hotel, Hurghada, Egypt. 2015.
2015Makhlouf, Abdel Salam Hamdy and Soliman, Hanaa: Effect and NaF) of Nano-Additives on the Performance (Al2O3 of Ceramic Coatings Formed by Microarc Oxidation on Magnesium Alloys. In: Handbook of Nanoceramic and Nanocomposite Coatings and Materials, 2015, 389
2015Moldoveanu, Iuliana and van Stefan-Staden, Raluca-Ioana and van Staden, Jacobus Frederick: Electrochemical sensors based on nanostructured materials. Handbook of Nanoelectrochemistry. Springer, Cham, 2015. 1--15
2015Hamdy, Abdel Salam: Evaluation of Materials Performance for Industrial Applications. The Latin America IdEA Partnership (“La Idea”) Incubator Program, Feb. 2-13, 2015, Advanced Manufacturing Session at the Coastal Bend Business Innovation Center hosted by Texas A\&M University in Corpus Cristi, Texas. USA.. 2015. 1
2015Abdal-hay, Abdalla and Hamdy, Abdel Salam and Khalil, Khalil Abdelrazek: Fabrication of durable high performance hybrid nanofiber scaffolds for bone tissue regeneration using a novel, simple in situ deposition approach of polyvinyl alcohol on electrospun nylon 6 nanofibers. In: Materials Letters, 147, 2015, 25--28
2015Farahat, A. I. Z. and Hamdy, A.S.: Failure due to synergistic fracture and pitting corrosion of ruptured bolts in a LARZAC engine of Alpha Jet. Handbook of materials failure analysis with case studies from the aerospace and automotive industries. Butterworth-Heinemann, Elsevier, ISBN 9780128009505, Chapter 11., 2015. 231--237
2015Soliman, H: Hamdy Abdel Salam. In: Protection of Metals and Physical Chemistry of Surfaces, 51, 2015, 620
2015Makhlouf, Abdel Salam Hamdy and Aliofkhazraei, Mahmood: Handbook of materials failure analysis with case studies from the oil and gas industry. Butterworth-Heinemann, 2015
2015Makhlouf, Abdel Salam Hamdy: History of high performance paints and coatings of unique characteristics. Handbook of nanoceramic and nanocomposite coatings and materials. Elsevier Publication, USA, 2015. chapter--14
2015Abdal-hay, Abdalla and Hamdy Makhlouf, Abdel Salam and Khalil, Khalil Abdelrazek: Novel, facile, single-step technique of polymer/TiO2 nanofiber composites membrane for photodegradation of methylene blue. In: ACS applied materials \& interfaces, 7, 2015, 13329--13341
2015Hamdy, Abdel Salam: Opportunities and challenges in smart coatings manufacturing. Region One Technology Student Association Leadership Conference (TSA), UTPA, Texas, USA. 2015.
2015Hamdy, Abdel Salam: Recent Trends in Smart Coatings. The Latin America IdEA Partnership (“La Idea”) Incubator Program, Feb. 2-13, 2015, Advanced Manufacturing Session at the Coastal Bend Business Innovation Center hosted by Texas A\&M University in Corpus Cristi, Texas. USA.. 2015. 1
2015Abu-Thabit, Nedal Y and Makhlouf, Abdel Salam Hamdy: Recent advances in nanocomposite coatings for corrosion protection applications. In: Handbook of nanoceramic and nanocomposite coatings and materials, 2015, 515--549
2015Attia, E. M. and Hamdy, A. S. and Hussien, and H. M.: Stability of permanganate conversion coating formed on ZE41 - Mg alloy at different pHs and coating times. In: J. Basic. Appl. Chem., 5, 2015, 1--15
2015Hamdy, Abdel Salam: Techniques for Materials Protection in Industry. The Latin America IdEA Partnership (“La Idea”) Incubator Program, Feb. 2-13, 2015, Advanced Manufacturing Session at the Coastal Bend Business Innovation Center hosted by Texas A\&M University in Corpus Cristi, Texas. USA.. 2015. 1
2014Abdal-hay, Abdalla and Hamdy, Abdel Salam and Khalil, Khalil Abdelrazek and Lim, Ju Hyun: A novel simple in situ biomimetic and simultaneous deposition of bonelike apatite within biopolymer matrix as bone graft substitutes. In: Materials Letters, 137, 2014, 260--264
2014Hamdy Makhlouf, A.S.: Corrosion resistant chemical conversion coatings of automatic healing properties for magnesium alloys. Materials Science and Technology Conference and Exhibition 2013, MS\&T 2013, Oct 27-31, Montreal, QC, Canada. Symposium "Recent approaches and challenges in smart coatings". 2014.
2014Abdal-Hay, Abdalla and Hamdy, Abdel Salam and Lim, Ju Hyun: Facile preparation of titanium dioxide micro/nanofibers and tubular structures by air jet spinning. In: Ceramics International, 40, 2014, 15403--15409
2014Abdal-Hay, Abdalla and Hamdy, Abdel Salam and Abdellah, Mohammed Y and Lim, Juhyun: In vitro bioactivity of implantable Ti materials coated with PVAc membrane layer. In: Materials Letters, 126, 2014, 267--270
2014Farahat, Ahmed IZ and Hamdy, Abdel Salam: Influence of hot forging and alloying with Al on the electrochemical behavior and mechanical properties of austenitic stainless steel. In: Materials \& Design, 57, 2014, 538--545
2014Makhlouf, Abdel Salam Hamdy: Intelligent Stannate-Based Coatings of Self-Healing Functionality for Magnesium Alloys. Intelligent Coatings for Corrosion Control. Elsevier, 2014. 537--555
2014Makhlouf, Abdel Salam Hamdy: New simple approaches for designing eco-friendly smart and functional coatings for industrial applications. Materials Science and Technology Conference and Exhibition 2014, MS and T 2014. 2014.
2014MAKHLOUF, ASH: Pan-American, USA. In: Handbook of Smart Coatings for Materials Protection, 2014, 275
2014Abdal-hay, Abdalla and Vanegasb, Pablo and Hamdy, Abdel Salam and Engele, Felix B. and Lim, Ju Hyun: Preparation and Characterization of Vertically Arrayed Hydroxyapatite Nanoplates on Electrospun Nanofibers for Bone Tissue Engineering. In: Chemical Engineering Journal, 2014,
2014MAKHLOUF, ASH: Protective coatings for automotive, aerospace and military applications: Current prospects and future trends. In: Handbook of Smart Coatings for Materials Protection, 2014, 121
2014Yusuf, N and MAKHLOUF, ASH: Recent advances in polyaniline (PANI)-based organic coatings for corrosion protection. In: Handbook of Smart Coatings for Materials Protection, 2014, 459
2014Hamdy, Abdel Salam: Smart nano-coatings for materials protection: State of the art and future perspectives. Nanomaterials for industry energy environment products. 2014.
2014MAKHLOUF, ASH: Smart stannate-based self-healing coatings for corrosion protection of magnesium alloys. In: Handbook of Smart Coatings for Materials Protection, 2014, 275
2014Makhlouf, ASH: Techniques for synthesizing and applying smart coatings for material protection. Handbook of Smart Coatings for Materials Protection. Woodhead Publishing, 2014. 56--74
2014Hamdy, Abdel Salam and Hussien, HM: The effect of solution pH of permanganate coating on the electrochemical characteristics of ZE41 magnesium alloy in chloride media. In: International Journal of Electrochemical Science, 9, 2014, 2682--2695
2013Hamdy, Abdel Salam and Butt, Darryl P: Corrosion mitigation of rare-earth metals containing magnesium EV31A-T6 alloy via chrome-free conversion coating treatment. In: Electrochimica Acta, 108, 2013, 852--859
2013Hamdy, Abdel Salam and Hussien, HM: Deposition, characterization and electrochemical properties of permanganate-based coating treatments over ZE41 Mg-Zn-rare earth alloy. In: International Journal of Electrochemical Science, 8, 2013, 11386--11402
2013Hamdy, Abdel Salam and Alfosail, F and Gasem, Z: Eco-friendly, cost-effective silica-based protective coating for an A6092/SiC/17.5 p aluminum metal matrix composite. In: Electrochimica Acta, 2013,
2013Hamdy, Abdel Salam and Alfosail, F and Gasem, Z: Effect of changing the silica coating pH on the corrosion characteristics of A6092/SiC/17.5 p aluminum metal matrix composite in chloride media. In: Electrochimica Acta, 107, 2013, 518--524
2013Hamdy, Abdel Salam: Electrochemical Behavior of Ti-Ni-Cu Shape Memory Alloy Ribbons Used for the Fabrication of Sensors and Actuators. In: TMS2013 Supplemental Proceedings, 2013, 1007--1019
2013Makhlouf, Abdel Salam Hamdy: Environmentally-friendly smart coatings for materials protection: State of the art and future perspectives. Qatar Foundation Annual Research Conference (QF-ARC), Nov. 24-25, 2013, Doha, Qatar.. 2013.
2013Makhlouf, Abdel Salam Hamdy: Expert voices column: Plane vs. Car. In: European Coatings Journal, 2013, 16
2013Makhlouf, A.S.H and Farahat, A.I.Z: Failure analysis of a cracked stainless steel holder in a condensate stabilizer unit. In: Materials Performance NACE, 52, 2013,
2013Hamdy, Abdel Salam and Butt, DP: Novel smart stannate based coatings of self-healing functionality for AZ91D magnesium alloy. In: Electrochimica Acta, 97, 2013, 296--303
2013Hamdy, Abdel Salam and Gasem, Z and Alfosail, F: Protective Silica-Based Coating for Aluminum 6092/SiCp Metal Matrix Composite in Chloride Media. In: TMS2013 Supplemental Proceedings, 2013, 229--244
2013Makhlouf, Abdel Salam Hamdy: Recent advances in smart coatings for materials protection: State-of-the-art and future perspectives. Invited Seminar, The University of Jordan, Jordan. 2013.
2013Hamdy, Abdel Salam: Smart coatings for aerospace materials: State of the art and future perspectives. Third International Conference on Aerospace Science \& Engineering (ICASE2013), August 21-23, 2013, Islamabad, Pakistan. 2013.
2013Craciunescu, Corneliu and Hamdy, Abdel Salam: The Effect of Copper Alloying Element on the Corrosion Characteristics of Ti-Ni and Ternary Ni-Ti-Cu Meltspun Shape Memory Alloy Ribbons in 0.9% NaCl Solution. In: International journal of electrochemical science, 8, 2013, 10320--10334
2012Makhlouf, AS: Casting out chromium. In: European Coatings Journal, 2012, 16
2012Hamdy, Abdel Salam and Doench, I and Möhwald, H: Chrome-free self-healing protective coating for AA2024 in chloride containing solution. CORROSION 2012. 2012. 1--14
2012AS Hamdy, MA Shoeib, H Hady: Nano-composite and ternary-alloy protective coatings for steel. 14th NACE Middle East Corrosion Conf. \& Exhibition, 12-15 Feb. 2012, Bahrain. 2012. 75--CR
2012Makhlouf, ASH and Tiginyanu, Ion: New book Nanocoatings and Ultra-thin Films: Technologies and Applications. In: Электронная обработка материалов, 48, 2012, 116--117
2012Hamdy, AS: Smart anti-corrosion coatings for materials protection in petroleum industry: opportunities and future challenges. Energy Pipelines Africa Summit 2012, 8-9 Nov 2012, Johannesburg, South Africa. 2012.
2012Hamdy, Abdel Salam and Doench, I and Möhwald, H: The effect of vanadia surface treatment on the corrosion inhibition characteristics of an advanced magnesium Elektron 21 alloy in chloride media. In: International Journal of Electrochemical Science, 7, 2012, 7751--7761
2012Hamdy, Abdel Salam and Doench, I and Möhwald, H: Vanadia-based coatings of self-repairing functionality for advanced magnesium Elektron ZE41 Mg--Zn--rare earth alloy. In: Surface and Coatings Technology, 206, 2012, 3686--3692
2011Hamdy, Abdel Salam and Doench, I and Möhwald, H: Assessment of a one-step intelligent self-healing vanadia protective coatings for magnesium alloys in corrosive media. In: Electrochimica Acta, 56, 2011, 2493--2502
2011Makhlouf, ASH: Conventional and advanced coatings for industrial applications: an overview. Nanocoatings and Ultra-Thin Films. Elsevier, 2011. 159--181
2011Hamdy, Abdel Salam and Marx, Brian and Butt, Darryl: Corrosion behavior of nitride layer obtained on AISI 316L stainless steel via simple direct nitridation route at low temperature. In: Materials Chemistry and Physics, 126, 2011, 507--514
2011Makhlouf, Abdel Salam: Current and advanced coating technologies for industrial applications. Nanocoatings and Ultra Thin-Films: Technologies and applications. Woodhead Publishing Limited, Cambridge, UK, 2011. 1--32
2011Hamdy, Abdel Salam: Electrochemical behavior of diamond-like-carbon coatings deposited on AlTiC (Al2O3+ TiC) ceramic composite substrate in HCl solution. In: Electrochimica acta, 56, 2011, 1554--1562
2011Hamdy, AS and Doench, I and Möhwald, H: Intelligent self-healing corrosion resistant vanadia coating of flower-like morphology for AA2024 and novel magnesium alloys. 38th International Conference on Metallurgical Coatings and Thin Films. 2011. 2--6
2011Ahmed, Ibrahim and Abdel Salam, Hamdy: Microstructure, Corrosion, and Fatigue Properties of Alumina-Titania Nanostructured Coatings. In: Journal of Surface Engineered Materials and Advanced Technology, 2011, 2011,
2011Ibrahim, Ahmed and Hamdy, Abdel Salam: Microstructure, Corrosion, and Fatigue Properties of Alumina-Titania Nanostructured Coatings. In: Journal of Surface Engineered Materials and Advanced Technology, 1, 2011, 101--106
2011Hamdy, AS: Nano-composites and nano-ceramic protective coatings for steel and aluminum alloys. UNESCO Workshop on “Awareness of Nanotechnology”, 27-29 Nov., 2011, Cairo, Egypt. 2011.
2011Hamdy, AS: New approaches in designing smart self-healing coatings for automotive and aerospace materials. Invited talk at the European Coatings Conference Automotive Coatings. 2011. P71--P83
2011Makhlouf, Abdel Salam Hamdy: Smart self-healing eco-friendly nano and nano-composite protective coatings. Nanotechnologies and Biomedical Engineering. 2011. 48--48
2011Hamdy, AS and Doench, I and Möhwald, H: Smart self-healing vanadia protective coating of flower-like morphology for magnesium alloys. 18th International Corrosion Congress. 2011.
2010Hamdy, AS and Doench, I and Möhwald, H and Farahat, M: Advanced eco-friendly anti-corrosion coating technologies for aluminum and magnesium alloys. Session: Advanced Paints and Coatings, Forum: High Performance Materials and Technology, MarineTech Summit (MTS-2010), Oct. 26-28, 2010, Dalian, China.. 2010.
2010Hamdy, AS and Farahat, M: An attempt for designing economically attractive chrome-free conversion coatings for magnesium alloys. In: High Performance Coatings for Automotive and Aerospace Industries, Nova Science Publishers, NY, USA, available online at https://www. novapublishers. com/catalog/product\_info. php, 2010,
2010Hamdy, AS: Assimilating the characteristics of sulfide corrosion products on mild steel tanks. Tank Management and Assessment Forum, 25-26 April 2010 Venue: Dubai, UAE. 2010.
2010Hamdy, Abdel Salam and Farahat, M: Chrome-free zirconia-based protective coatings for magnesium alloys. In: Surface and Coatings Technology, 204, 2010, 2834--2840
2010Hamdy, Abdel Salam: Corrosion protection performance via nano-coatings. In: Recent Patents on Materials Science, 3, 2010, 258--267
2010Hamdy, AS and Butt, D and Marx, B and Farahat, M: Self-healing coatings for magnesium alloys. The 8th Spring Meeting of the Int'l Society of Electrochemistry, 2-5 May, 2010, Columbus, USA.. 2010. 85
2010Hamdy, Abdel Salam: The role of nanotechnology in designing high performance nano-ceramic coatings. In: International Review of Chemical Engineering, 2, 2010, 256--262
2009Hamdy, AS and Marx, B and Butt, DP: A new approach in designing eco-friendly low cost chemical conversion coatings for magnesium alloys. Keynote talk at 6th International Symposium on Surface Protective Coatings, Goa, India. 2009.
2009A.S. Hamdy, D. Butt and B. Marx: Enhancing the passivity of 316L stainless steel by low-temperature nitriding. EUROCORR 2009, France. 2009. P--792
2009Butt, DP and Jaques, B and Osterberg, D and Marx, BM and Hamdy, Abdel Salam: New routes to lanthanide and actinide nitrides. GLOBAL 2009, France, Sept. 6-11, 2009. 2009. 9057
2009Makhlouf, Abdel Salam H and Farahat, Mahmoud: Novel Approaches in Designing Protective Coatings for Magnesium Alloys. The Electrochemical Society Meeting. 2009. 1807--1807
2009Hamdy, AS and Farahat, M and .: Novel approaches in designing protective zirconia-based ceramic coatings for magnesium alloys. Symposium D2 Coatings for Corrosion Protection, 216th ECS Meeting - October 4-9, 2009, Vienna, Austria.. 2009. abstract--1807
2009Callahan, Patrick G and Jaques, Brian J and Marx, Brian M and Hamdy, Abdel Salam and Osterberg, Daniel D and Butt, Darryl P: Synthesis of dysprosium and cerium nitrides by a mechanically induced gas--solid reaction. In: Journal of nuclear materials, 392, 2009, 121--124
2009Hamdy, AS: Tailor-making of eco-friendly ceramic and nano-ceramic coatings for industrial applications. Nano Cement, Steel and Construction Industries Conference, 16-17 May 2009, Cairo, Egypt. 2009.
2009Hamdy, Abdel Salam: The correlation between electrochemical impedance spectroscopy and other polarization techniques for the corrosion evaluation of coated and bare metals in aqueous solutions. Corrosion Protection: Processes, Management and Technologies. Nova Science Publishers, NY, USA, 2009. Chapter--7
2009A.S. Hamdy and M. Farahat: Zirconia based ceramic coatings for magnesium alloys. EUROCORR 2009, 6-10 Sept. 2009, France. 2009. 7816
2008Hamdy, AS: A novel approach in designing high performance eco-friendly coatings for aerospace and automotive industries. “Advanced Materials and Structures -AMS'08”, School of Engineering, Universitatea 'Politehnica" din Timisoara, Romania, May 28-30, 2008.. 2008.
2008Hamdy, AS and Shoeib, M and Butt, D: Challenges in designing high performance anti-corrosion nano-sized thin films and nano-composite coatings for industrial applications. Int'l Conf. of Nanoscience, 17-19 June 2008, King Abdul Aziz University, Saudi Arabia.. 2008.
2008Hamdy, Abdel Salam and Shoeib, MA and Hady, H and Salam, OF Abdel: Electroless deposition of ternary Ni--P alloy coatings containing tungsten or nano-scattered alumina composite on steel. In: Journal of applied electrochemistry, 38, 2008, 385--394
2008Hamdy, AS: Fluoropolymer coatings for highly aggressive environments (PVDF coatings). In: High-performance organic coatings, Woodhead Publishing Ltd, UK, 2008, 212--223
2008Jaques, Brian J and Marx, Brian M and Hamdy, Abdel Salam and Butt, Darryl P: Synthesis of uranium nitride by a mechanically induced gas--solid reaction. In: Journal of nuclear materials, 381, 2008, 309--311
2008Hamdy, Abdel Salam: The effect of surface modification and stannate concentration on the corrosion protection performance of magnesium alloys. In: Surface and Coatings Technology, 203, 2008, 240--249
2008Hamdy, Abdel Salam and Shoeib, MA and Saeh, AG and Barakat, Y: The electrochemical behavior of Mild Steel in sulfide polluted NaCl at different velocities. In: International Journal of Electrochemical Science, 3, 2008, 1142--1148
2007Hamdy, AS and Hady, H and Shoeib, MA and Abdel Salam, O.F: Advanced electroless Ni-P coatings containing tungsten or nano-sized alumina particles: The effect of kinetic parameters. Proceedings of European Corrosion Congress 2007, Germany.. 2007.
2007Hamdy, Abdel Salam: Alkaline-based surface modification prior to ceramic-based cerate conversion coatings for magnesium AZ91D. In: Electrochemical and solid-state letters, 10, 2007, C21
2007Marx, Brian M. and Makhlouf, Abdel Salam Hamdy and Butt, D.P and Thomsen, David: Assessing the Performance of Stannate Conversion Coatings on Mg Alloys. 2007,
2007Thomsen, D and Hamdy, AS and Marx, B and Butt, DP: Corrosion behavior of some newly developed Mg alloys in NaCl solution. Symposium "Corrosion and Coatings Challenges in Industry", Proceedings of AAAS Pacific Division 88th Annual Meeting, Boise, ID, June 19, 2007.. 2007.
2007Marx, B and Hamdy, AS and Butt, DP and Thomsen, D: Corrosion of newly developed magnesium alloys in chloride containing solutions. Automotive Symposium, Proceedings of MS\&T '07, Sept. 16-20, 2007, Michigan, USA. 2007.
2007Hamdy, AS and Sa’eh, AG and Shoeib, MA and Barakat, Y: EIS Studies of Steel in Sulfide Polluted Sea Water. Symposium: Recent Developments in Steel Processing, Proceedings of MS\&T. 2007. 16--20
2007Hamdy, AS and Butt, D: Eco-friendly conversion coatings for automotive and aerospace materials. Proceedings of European Coatings Conf. “New Concepts for Anti-Corrosive Coatings”, 14-15 June 2007, Berlin, Germany.. 2007.
2007Hamdy, AS and Shoeib, M and Hady, H and Abdel Salam, OF: Effect of the experimental parameters on the coating performance of Ni-P nano-composite alloy coatings. Processing and Product Manufacturing: Innovative Processing and Synthesis of Ceramics, Glasses and Composites Symposium, Proceedings of MS\&T '07, Sept. 16-20, 2007, Michigan. USA. 2007.
2007Hamdy, AS and Hady, H and Shoeib, M and Abdel Salam, O: Electrochemical impedance studies on Ni-P-W and Ni-P-Al2O3 nano-composite alloy coatings in 3.5% NaCl. Proceedings of European Corrosion Congress EUROCORR 2007, Germany.. 2007.
2007Hamdy, AS and Sa`eh, A and Shoeib, MA and Barakat, Y: Evaluation of corrosion and erosion-corrosion resistances of mild steel in sulfide polluted NaCl solution. Proceedings of European Corrosion Congress 2007, Germany.. 2007.
2007Callahan, P and Jaques, B and Hamdy, AS and Balfour, G, Osterberg, D and Marx, B and Butt, DP: Mechanical synthesis of cerium and dysprosium nitrides. Nuclear Materials Symposium, Proceedings of MS\&T '07, Sept. 16-20, 2007, Michigan, USA. 2007.
2007Hamdy, AS and Hady, H and Shoeib, MA and Abdel Salam, OF: Newly developed corrosion resistant nano-composite alloy coatings for steels. Symposium “Corrosion and Coatings Challenges in Industry”, AAAS Pacific Division 88th Annual Meeting, Boise, ID. 2007.
2007Hamdy, AS and Marx, B and Butt, DP and Thomsen, D: Novel tin oxide based ceramic coatings for magnesium alloys. Automotive Symposium MS\&T. 2007. 16--20
2007Jaques, B and Hamdy, AS and Balfour, G and Osterberg, D and Marx, B and Butt, DP: Synthesis of dysprosium nitride via direct nitrification of dysprosium metal. Nuclear Materials Symposium, Proceedings of MS\&T '07, Sept 16-20, 2007, Michigan, USA. 2007.
2007Hamdy, Abdel Salam and El-Shenawy, Eman and El-Bitar, T: The corrosion behavior of niobium bearing cold deformed austenitic stainless steels in 3.5% NaCl solution. In: Materials Letters, 61, 2007, 2827--2832
2006Hamdy, Abdel Salam: A clean low cost anti-corrosion molybdate based nano-particles coating for aluminum alloys. In: Progress in organic coatings, 56, 2006, 146--150
2006Hamdy, Abdel Salam: Advanced nano-particles anti-corrosion ceria based sol gel coatings for aluminum alloys. In: Materials Letters, 60, 2006, 2633--2637
2006Hamdy, AS and El-Shennawy, EH and El-Bitar, T: Corrosion behavior of Nb-bearing austenitic stainless steels in NaCl solution. In: MATERIALS SCIENCE AND TECHNOLOGY-ASSOCIATION FOR IRON AND STEEL TECHNOLOGY-, 6, 2006, 423
2006Salam Hamdy, Abdel and Butt, DP: Corrosion protection performance of nano-particles thin-films containing vanadium ions formed on aluminium alloys. In: Anti-Corrosion Methods and Materials, 53, 2006, 240--245
2006Periasamy, P and Hamdy, AS and Marx, B and Butt, DP and Simpson, MF: Corrosion studies on candidate materials for pyroprocessing. Int'l Pyroprocessing Research Conference, August 8-10, 2006, Idaho Falls, USA.. 2006.
2006Hamdy, Abdel Salam and El-Shenawy, E and El-Bitar, T: Electrochemical impedance spectroscopy study of the corrosion behavior of some niobium bearing stainless steels in 3.5% NaCl. In: International Journal of Electrochemical Science, 1, 2006, 171--180
2006Hamdy, Abdel Salam: Enhancing corrosion resistance of aluminum composites in 3.5% NaCl using pigmented epoxy fluoropolymer. In: Progress in Organic Coatings, 55, 2006, 218--224
2006Salam Hamdy, Abdel: Enhancing the corrosion resistance of magnesium alloy AZ91D in 3.5 per cent NaCl solution by cerate conversion coatings. In: Anti-Corrosion Methods and Materials, 53, 2006, 367--373
2006Hamdy, Abdel Salam and Butt, DP: Environmentally compliant silica conversion coatings prepared by sol--gel method for aluminum alloys. In: Surface and Coatings Technology, 201, 2006, 401--407
2006Hamdy, AS: Green cerate based surface treatment for improving the corrosion resistance of magnesium alloy AZ91D in marine environments. In: MATERIALS SCIENCE AND TECHNOLOGY-ASSOCIATION FOR IRON AND STEEL TECHNOLOGY-, 5, 2006, 141
2006Morks, MF and Hamdy, Abdel Salam and Fahim, NF and Shoeib, MA: Growth and characterization of anodic films on aluminum alloys in 5-sulfosalicylic acid solution. In: Surface and Coatings Technology, 200, 2006, 5071--5076
2006Hamdy, AS: Novel coating systems for corrosion protection of aluminum alloys and composites in marine environment, presented at Symposium Materials Processing Challenges for the Aerospace Industry. Materials Science \& Technology Conference and Exhibition (MS\&T’06). 2006. 667--674
2005Hamdy, AS and Ismail, AK and Butt, DP and Ismail, AA: Comparative studies on anticorrosion nano-particle silica-, ceria-and molybdate based thin films adsorbed on aluminum alloys. International Symposium on the Role of Adsorbed Films and Particulate Systems in Nano and Biotechnologies. 2005. 24--26
2005Hamdy, AS: Corrosion protection performance of pigmented epoxy fluoropolymer coatings on aluminum composites. Proceedings of EUROCORR 2005, Lisbon, 4-8 Sep., Portugal. 2005. Paper--No
2005Hamdy, AS and El-Shennawy, E and El-Bitar, T and Anchev, V: EIS as a powerful non destructive tool to investigate the corrosion behavior of austenitic stainless steels in NaCl solution. 2nd International Conference on Advances in Engineering Sciences \& Technologies, Sofia, Bulgaria, Nov. 12-14, 2005.. 2005.
2005Hamdy, AS and Ismail, AK and Butt, DP: Nano-particle molybdate based anti-corrosion thin films for aluminum alloys. US-Egypt Workshop on “Synthesis, Characterization and Industrial Application of Nano-particles and Nano-structured Materials. 2005. 11--15
2005Hamdy, AS: Nanotechnology for eco-friendly anti-corrosion surface coatings: from cradle to cradle. 2nd Int'l Conference for Scientific Research Articles and Their Applications, Cairo Univ., 17-19 Dec. 2005.. 2005.
2005Hamdy, AS: Novel eco-friendly surface coatings for automotive and aerospace materials, invited presentation at Arabian-European Symposium on Environmental Protection. In: Tunisia, Sept, 2005,
2005Hamdy, AS and Ismail, AK and Butt, DP and Ismail, AA: Sol--gel prepared anti-corrosion vanadia-based ceramic coatings for 6061-T6 aluminum alloy. International Symposium on the Role of Adsorbed Films and Particulate Systems in Nano and Biotechnologies. 2005. 24--26
2005Hamdy, AS and El-Bitar, T and El-Shennawy, E: The effect of Nb alloying element and cold deformation on the corrosion behavior of austenitic stainless steels in NaCl solution. Proceedings of seminar "Uses of Nb in Micro-alloyed Processed Steels" April 2005, organized by CBMM, NPC, Germany.. 2005.
2004Hamdy, AS: A novel coating system for the corrosion protection of aluminum alloys and composites in marine environments. Proceedings of IIW Int'l Congress on Welding and Applied Processes, Nov 29-Dec 1, 2004, CMRDI, Egypt.. 2004.
2003Hamdy, AS: Review: Corrosion protection via sol-gel derived nano-sized thin films. Proceedings of 22 nd Annual Conference" Corrosion Problems in Industry", Dec 2003. 2003. 8--11
2002Hamdy, AS and Beccaria, AM: Cerium conversion coatings: a new era of chrome-free pretreatments. 21st Annual Conference Corrosion Problems in Industry, Dec. 2002. 17--20
2002Hamdy, Abdel Salam and Beccaria, Anna Maria: Chrome-free pretreatment for aluminium composites. In: Surface and interface analysis, 34, 2002, 160--163
2002Hamdy, Abdel Salam and Beccaria, Anna Maria and Temtchenko, Tatiana: Corrosion protection of AA6061 T6 by fluoropolymer coatings in NaCl solution. In: Surface and Coatings Technology, 155, 2002, 176--183
2002Hamdy, Abdel Salam and Beccaria, Anna Maria and Temtchenko, Tatiana: Improving the corrosion protection of AA6061 T6--10% Al2O3 using new surface pre-treatments prior to fluoropolymer coatings. In: Surface and Coatings Technology, 155, 2002, 184--189
2001Hamdy, AS and Beccaria, AM and Traverso, P: Corrosion protection of aluminum metal-matrix composites I- Cerium pretreatment as an alternative to chromating. 9th European Conf. on Application of Surface and Interface Analysis (ECASIA’01), France. 2001. 376
2001Hanmdy, AS and Beccaria, AM and Spiniello, R: The Effect of Cerium Pretreatment on The Corrosion Behaviour of Aluminium Composites. In: Corrosion Prevention and Control, 48, 2001, 101--105
2001Hamdy, AS and Beccaria, AM and Spiniello, R: The effect of cerium pretreatment on the corrosion behaviour of aluminium composites. In: Corrosion Prevention \& Control, 48, 2001, 101--109
n.n.Makhlouf, Abdel Salam Hamdy: NANO-CERAMIC and NANO-COMPOSITE COATINGS and MATERIALS. n.n.,