Dr. Sanjib Majumdar

Profile

Academic positionFull Professor
Research fieldsThermodynamics and Kinetics as well as Properties of Phases and Microstructure of Materials,Metallurgical, Thermal and Thermomechanical Treatment of Materials
Keywordsrefractory high entropy alloys, refractory metal based alloys, boron based materials, protective coatings, high temperature corrosion

Current contact address

CountryIndia
CityMumbai
InstitutionBhabha Atomic Research Center
InstituteMaterials Processing Division

Host during sponsorship

Prof. Dr.-Ing. Hans-Jürgen ChristLehrstuhl für Materialkunde und Werkstoffprüfung, Universität Siegen, Siegen
Start of initial sponsorship01/08/2011

Programme(s)

2011Humboldt Research Fellowship Programme for Postdocs

Publications (partial selection)

2026Majumdar, Sanjib: Corrosion behavior of aluminized {SS} 316 and hastelloy {N} in molten {LiF-KF-NaF} salt at 700--800 °C. In: High Temp. Corros. Mater., 103, 2026,
2026Paul, Bhaskar and Shrivastava, Pankaj and Kumar, Shubham and Kishor, Jugal and Kumar, Sanjay and Majumdar, Sanjib: Effect of Ni addition on dehydrogenation behavior of {MgH2}. In: J. Therm. Anal. Calorim., 151, 2026, 8983--8989
2026Basha, M M and Paul, B and Viswanath, B and Murthy, T S R Ch and Majumdar, S and Sankar, M R: Influence of multi-step heat treatment on enhancing the microstructural and mechanical characteristics of selectively laser-melted Ti64 alloy. In: Prog. Addit. Manuf., 2026,
2026Kumar, Shubham and Majumdar, Sanjib: Isothermal kinetics and hydrogen reduction mechanisms for synthesis of ultra-fine {W--Cu} composite powder. In: Mater. Chem. Phys., 365, 2026, 132903
2026Das, Arijit and Majumdar, Sanjib: Linking novel processing, thermo-mechanical response and high-temperature oxidation in refractory high-entropy alloy via a multiscale computational-experimental approach. In: Mater. Des., 269, 2026, 116773
2026Murthy, Tammana S R C and Sonber, J K and Sairam, K and Majumdar, Sanjib: Role of carbon in the synthesis, densification, and toughening of non-oxide ceramics. Carbon Materials in Nuclear Technology. Boca Raton: CRC Press, 2026. 276--309
2026Kumar, Shubham and Kishor, Jugal and Paul, Bhaskar and Sahu, Ashok K and Majumdar, Sanjib: Study on fabrication of {W-Cu} composites and understanding the wear behavior at room temperature and 700 °C under high vacuum. In: Int. J. Refract. Hard Met., 139, 2026, 107844
2026Shivakumar, Jhaya Gomathy and Murthy, Tammana S R C and Sonber, J K and Kumar, Vinod and Bhattacharya, Shovit and Majumdar, Sanjib: Synthesis, densification behaviour, and mechanical properties of high-entropy borides: Role of composition and sintering route. In: Ceram. Int., 2026,
2025Das, Arijit and Majumdar, Sanjib: Observing the formation of oxide scale structures over novel {TaMoNbCrAl0.5Hf0.5} and {TaMoNbCrAl} refractory high entropy alloys during high-temperature oxidation. In: Scr. Mater., 257, 2025, 116484
2025Kumar, Shubham and Majumdar, Sanjib and Paul, Bhaskar and Kishor, Jugal and Kain, Vivekanand: Preparation and characterization of low-carbon ferroboron alloy by aluminothermic reduction of oxides. Advances in Materials and Processing. Singapore: Springer Nature Singapore, 2025. 23--32
2025Basha, M M and Murthy, T S R Ch and Sahu, A K and Chowdhury, S R and Majumdar, S and Sankar, M R: Significance of the electrochemical passive layer during the wear tests of surface finished {SLM} stainless steel features. In: Progress in Engineering Science, 2, 2025, 100036
2025Paul, Bhaskar and Murthy, Tammana S R C and Kumar, Shubham and Kishor, J and Raja, Sk Wasim and Acharya, R and Majumdar, S: Studies on evolution of microstructure, oxidation and tribological behaviour of {mo-35Ti-10Si-2B} (wt.%). Advances in Materials and Processing. Singapore: Springer Nature Singapore, 2025. 127--139
2024Majumdar, Sanjib and Tewari, Raghvendra and Kain, Vivekanand and Mohanty, Ajit Kumar: Contribution of bhabha atomic research centre to the ``metals journey of India''. Indian Metallurgy. Singapore: Springer Nature Singapore, 2024. 147--159
2024Sairam, K and Sashanka, A and Sonber, J K and Murthy, T S R Ch and Kulwant, S and Nageswara Rao, G V S and Majumdar, S: Damage evolution in spark plasma sintered boron carbide under scratch and indentation loading conditions. In: Tribol. Int., 192, 2024, 109316
2024Paul, Bhaskar and Kumar, Shubham and Kishor, J and Majumdar, Sanjib: Effect of microstructure on oxidation and micro-mechanical behavior of arc consolidated {Mo-Ti-Si-(B}) alloys. In: J. Mater. Eng. Perform., 2024,
2024Basha, M M and Sankar, M R and Murthy, T S R Ch and Majumdar, S: High-temperature tribology of selective laser-melted titanium alloys: Role of adhesive wear. In: J. Tribol., 146, 2024,
2024Das, Arijit and Majumdar, Sanjib: Insights into a novel refractory multi principal element alloy ({Mo98W2)85Nb10(TiHf)5} and advancements in oxidation resistance upto 1300 °C through silicide coatings. In: Scr. Mater., 245, 2024, 116063
2024Raja, Sk Wasim and Acharya, R and Sonawane, Arati D and Murthy, T S R C and Majumdar, S: Potential of external (in air) particle induced gamma-ray emission method for the preparation of isotopic composition of boron in-house reference standard in boron carbide matrix for quality control work. In: J. Anal. At. Spectrom., 39, 2024, 2278--2289
2024Paul, Bhaskar and Kumar, Sanjay and Majumdar, Sanjib: Preparation, characterization and modification of magnesium hydride for enhanced solid-state hydrogen storage properties. In: Int. J. Hydrogen Energy, 96, 2024, 494--501
2024Sonber, Jitendra Kumar and Murthy, Tammana Sree Rama Chandra and Paul, Bhaskar and Majumdar, Sanjib and Sairam, K and Sahoo, Deepak and Singh, D K and Bathula, Vishwanadh and Kain, Vivekanand: Studies on synthesis, densification, and characterization of neodymium hexaboride. In: Int. J. Appl. Ceram. Technol., 21, 2024, 1425--1437
2024Basha, M M and Sankar, M R and Murthy, T S R Ch and Sahu, A K and Majumdar, S: Tribological investigations on additively manufactured inconel 718 features with silicon carbide ball: Role of the Tribo-oxide layer. In: Tribol. Lett., 72, 2024,
2024Majumdar, Sanjib and Kumar, Shubham and Paul, Bhaskar and Kishor, Jugal: {Alumino-Silico-thermic} synthesis of high purity ferroboron alloy and its characterization. In: Mater. Chem. Phys., 312, 2024, 128593
2023Sharma, S K and Saify, M T and Majumdar, Sanjib and Mollick, Palash K: Interaction study of molten uranium with multilayer {SiC/Y2O3} and {Mo/Y2O3} coated graphite. In: Nucl. Eng. Technol., 55, 2023, 1855--1862
2023Arati, D S and Murthy Tammana, S R C and Sonber, J K and Paul, B and Majumdar, S and Tyagi, A K: Studies on synthesis and densification of niobium diboride using carbothermic reduction and hot pressing. In: Int. J. Refract. Hard Met., 112, 2023, 106119
2022Raja, Sk Wasim and Sharma, Vishal and Samanta, Sudeep Kumar and Acharya, Raghunath and Murthy, Tammana Src and Majumdar, Sanjib and Pujari, Pradeep Kumar: Development of an innovative external (in air) Particle Induced Gamma-ray Emission method for rapid non-destructive determination of isotopic composition of boron in ``As received'' boron based ceramic neutron absorbers. In: Anal. Chim. Acta, 1202, 2022, 339686
2022Kumar, Shubham and Paul, Bhaskar and Kishor, Jugal and Majumdar, Sanjib and Kain, Vivekanand: Microstructure and mechanical and oxidation properties of multilayer aluminide coatings formed over {P91} steel. In: Trans. Indian Inst. Met., 75, 2022, 887--893
2022Paul, Bhaskar and Kishor, Jugal and Karthik, A and Murthy, Tammana S R C and Sunil, Saurav and Singh, K and Majumdar, Sanjib: The studies on the tribological performance, characterization and mechanical properties of {W-2Ni-1Fe} (wt%) alloy. In: Int. J. Refract. Hard Met., 103, 2022, 105752
2021Sonber, Jitendra Kumar: Development and characterization of {SiC} fiber reinforced {B4C} composite. 2021,
2021Kumar, Shubham and Majumdar, Sanjib and Paul, Bhaskar and Kishor, Jugal and Kain, Vivekanand: Kinetics of formation of pack aluminized coating on 9Cr 1Mo steel and interdiffusional behaviour of iron aluminides at intermediate temperatures. In: Surf. Coat. Technol., 426, 2021, 127794
2021Majumdar, S and Kishor, J and Behera, A N and Vishwanadh, B and Borgohain, A and Kapoor, R and Tewari, R and Kain, V and Krishnan, Madangopal and Dey, G K and Banerjee, S: Preparation and characterization of {Nb-1Zr-0.1C} alloy suitable for liquid metal coolant channels of high temperature reactors. In: J. Nucl. Eng. Radiat. Sci., 7, 2021,
2021Sonber, J K and Murthy, T S R Ch and Majumdar, Sanjib and Kain, Vivekanand: Processing of {ZrB2-} and {HfB2-based} ultra-high temperature ceramic materials: A review. In: Mater. Perform. Charact., 10, 2021, 20200133
2021Chen, Zhenghao and Paul, Bhaskar and Majumdar, Sanjib and Okamoto, Norihiko L and Kishida, Kyosuke and Inui, Haruyuki and Otani, Shigeki: Room-temperature deformation of single crystals of {ZrB2} and {TiB2} with the hexagonal {AlB2} structure investigated by micropillar compression. In: Sci. Rep., 11, 2021, 14265
2020Majumdar, Sanjib and Kishor, Jugal and Paul, Bhaskar and Kain, Vivekanand: Densification behaviour, microstructural characteristics and mechanical properties of liquid phase sintered {W--2Ni--1Fe} alloy. In: J. Alloys Compd., 818, 2020, 152897
2020Sonber, J K and Majumdar, Sanjib and Kain, Vivekanand: Densification, microstructure evolution and properties of {B4C-NiAl} composite. In: J. Mater. Eng. Perform., 29, 2020, 2374--2385
2020Mittra, J and Kavalur, A and Kumbhar, N T and Majumdar, S and Das, N and Arya, A: Effectiveness of pulsed laser deposited {ZrO2} surface film over autoclaved oxide film on a Zr alloy for hydrogen barrier application. In: Surf. Coat. Technol., 404, 2020, 126548
2020Das, Amrita and Chandrakumar, K R S and Paul, Bhaskar and Chopade, Suresh M and Majumdar, Sanjib and Singh, Ajoy K and Kain, Vivekanand: Enhanced adsorption and separation of zirconium and hafnium under mild conditions by phosphoric acid based ligand functionalized silica gels: Insights from experimental and theoretical investigations. In: Sep. Purif. Technol., 239, 2020, 116518
2020Majumdar, Sanjib: Recovery of elemental boron from boron carbide using {KCl-KF-KBF4} electrolyte in fused salt electroextraction process. In: J. Electrochem. Soc., 167, 2020, 062507
2020Paul, Bhaskar and Sarkar, A and Kishor, J and Majumdar, S: Studies on creep and wear behavior of {mo-40Ti-10Si} alloy prepared by hot pressing. In: J. Mater. Eng. Perform., 29, 2020, 1007--1014
2020Paul, Bhaskar and Kishor, Jugal and Majumdar, Sanjib and Kain, Vivekanand: Studies on growth mechanism of intermediate layer of ({Mo,W)5Si3} and interdiffusion in the ({Mo,W)-(Mo,W)Si2} system prepared by pack cementation coating. In: Surf. Interfaces, 18, 2020, 100458
2020Sonber, Jitendra Kumar and Majumdar, Sanjib and Singh, Kulwant and Kain, Vivekanand: Tribological behavior of hafnium diboride based material. In: Trans. Indian Ceram. Soc., 79, 2020, 125--130
2019Majumdar, Sanjib: A study on microstructure development and oxidation phenomenon of arc consolidated {Mo-Nb-Si-(Y}) alloys. In: Int. J. Refract. Hard Met., 78, 2019, 76--84
2019Murthy, Tammana S R C and Sonber, J K and Sairam, K and Majumdar, Sanjib and Kain, Vivekanand: Boron-based ceramics and composites for nuclear and space applications: Synthesis and consolidation. Handbook of Advanced Ceramics and Composites. Cham: Springer International Publishing, 2019. 1--36
2019Majumdar, Sanjib and Borgohain, Ananta and Kain, Vivekanand: Interaction between liquid lead-bismuth eutectic and aluminized Inconel 625 superalloy at 600 and 850 °C. In: J. Nucl. Mater., 518, 2019, 54--61
2019Majumdar, Sanjib and Singh, Pankaj Kumar and Pandey, Ajoy Kumar and Rao, G V S Nageswara: Kinetics of oxide scale growth on a (Ti, Mo) $_{5}$ Si $_{3}$ based oxidation resistant {Mo-Ti-Si} alloy at 900-1300 $^{∘}$ {C}. In: High Temp. Mater. Processes, 38, 2019, 533--540
2019Gupta, Sonal and Kumar, Raj and Majumdar, Sanjib and Sonber, Jitendra and Satpati, S K and Sahu, M L: Mechanistic understanding, gamma phase formation and morphological behaviour of the {Reduction−Diffusion} processed {U-Mo} alloy. In: J. Alloys Compd., 791, 2019, 109--120
2018Sairam, Kannan and Vishwanadh, Bathula and Sonber, Jitendra K and Murthy, Tammana S R Ch and Majumdar, Sanjib and Mahata, Tarasankar and Basu, Bikramjit: Competition between densification and microstructure development during spark plasma sintering of {B} $_{4}$ {C--Eu} $_{2}$ {O} $_{3}$. In: J. Am. Ceram. Soc., 101, 2018, 2516--2526
2018Raju, K and Sonber, J K and Murthy, T S R Ch and Sairam, K and Majumdar, S and Kain, V and Nageswar Rao, G V S: Densification, microstructural evolution, mechanical properties and oxidation study of {CrB2} + {EuB6} composite. In: J. Mater. Eng. Perform., 27, 2018, 2457--2465
2018Majumdar, Sanjib and Paul, Bhaskar and Singh, Pankaj Kumar and Kishor, Jugal and Kain, Vivekanand: Effect of Si content on microstructure, mechanical and oxidation properties of hot pressed {Mo-Ti-Si} alloys. In: Intermetallics (Barking), 100, 2018, 126--135
2018Sonber, J K and Raju, K and Murthy, T S R Ch and Sairam, K and Nagaraj, A and Majumdar, Sanjib and Kain, Vivekanand: Friction and wear properties of zirconium diboride in sliding against {WC} ball. In: Int. J. Refract. Hard Met., 76, 2018, 41--48
2018Paul, Bhaskar and Raju, K and Vadsola, M and Murthy, T S R C and Kishor, J and Arora, P and Chakraborty, P and Singh, K and Majumdar, S and Kain, V: Investigations on wear and liquid metal corrosion behavior of aluminized {IN-RAFMS}. In: Fusion Eng. Des., 128, 2018, 204--214
2018Acharya, R and Raja, Sk Wasim and Chhillar, Sumit and Gupta, J and Sonber, J K and Murthy, T S R C and Bhushan, K Sasi and Rao, Radhika M and Majumdar, S and Pujari, P K: Non-destructive quantification of total boron and its isotopic composition in boron based refractory materials by {PIGE} and an inter-comparison study using {TIMS} and titrimetry. In: J. Anal. At. Spectrom., 33, 2018, 784--791
2018Sonber, J K and Murthy, T S R Ch and Sairam, K and Nagaraj, A and Majumdar, S and Kain, V: {ZrB} 2 based novel composite with {NiAl} as reinforcement phase. In: Int. J. Refract. Hard Met., 70, 2018, 56--65
2017Paul, Bhaskar and Kishor, J and Chatterjee, A and Majumdar, S and Kain, V and Dey, G K: A study on feasibility of preparation of {W-Cr-Si} alloys by silicothermic co-reduction and characterization of as cast co-reduced alloy. In: J. Alloys Compd., 701, 2017, 864--869
2017Sonber, J K and Murthy, T S R Ch and Sairam, K and Nagraj, A and Singh, Kulwant and Bedse, R D and Majumdar, Sanjib and Kain, Vivekanand: Development and tribological properties of {SiC} fibre reinforced {CrB2} composite. In: J. Aust. Ceram. Soc., 53, 2017, 309--317
2017Majumdar, Sanjib and Paul, Bhaskar and Chakraborty, Poulami and Kishor, Jugal and Kain, Vivekanand and Dey, Gautam Kumar: Formation of Al 2 {O} 3 {/FeAl} coatings on a {9Cr-1Mo} steel, and corrosion evaluation in flowing {Pb-17Li} loop. In: J. Nucl. Mater., 486, 2017, 60--65
2017Majumdar, Sanjib and Paul, Bhaskar and Kain, V and Dey, G K: Formation of {Al2O3/Fe-Al} layers on {SS} 316 surface by pack aluminizing and heat treatment. In: Mater. Chem. Phys., 190, 2017, 31--37
2017Majumdar, Sanjib: Isothermal and cyclic oxidation resistance of pack siliconized {Mo--Si--B} alloy. In: Appl. Surf. Sci., 414, 2017, 18--24
2017Murthy, T S R Ch: Microstructure, Thermo-physical, mechanical and wear properties of in-situ formed boron carbide - zirconium diboride composite. In: Ceram. - Silik., 2017, 15--30
2016Majumdar, S and C. Mishra, S and Paul, B and Kishor, J and Mishra, P and K. Chakravartty, J: Development of {MoSi} 2 coating on {Nb-1Zr-0.1C} alloy. In: Mater. Today, 3, 2016, 3172--3177
2016Paul, Bhaskar and Jagannadh, S V S N and Majumdar, S and Singh, K: Formation and characterization of aluminide coating over Grade 91 steel. In: Mater. Today, 3, 2016, 3178--3183
2016Majumdar, Sanjib: Special issue: International conference on advances in refractory and reactive metals and alloys. In: Mater. Today, 3, 2016, v--vi
2015Vishwanadh, B and Majumdar, S and Orsborn, J and Banerjee, R and Tewari, R and Fraser, H and Dey, G K: Characterization of silicide phases formed during pack siliconizing coating on the {Nb-1Zr-0.1C} alloy. In: Intermetallics (Barking), 63, 2015, 59--66
2015Majumdar, Sanjib and Kishor, J and Paul, B and Hubli, R C and Chakravartty, J K: Isothermal oxidation behavior and growth kinetics of silicide coatings formed on {Nb--1Zr--0.1C} alloy. In: Corros. Sci., 95, 2015, 100--109
2015Majumdar, Sanjib and Dönges, Benjamin and Gorr, Bronislava and Christ, Hans-Jürgen and Schliephake, Daniel and Heilmaier, Martin: Mechanisms of oxide scale formation on yttrium-alloyed {Mo--Si--B} containing fine-grained microstructure. In: Corros. Sci., 90, 2015, 76--88
2014Gorr, B and Wang, L and Burk, S and Azim, M and Majumdar, S and Christ, H-J and Mukherji, D and Rösler, J and Schliephake, D and Heilmaier, M: High-temperature oxidation behavior of {Mo--Si--B-based} and {Co--Re--Cr-based} alloys. In: Intermetallics (Barking), 48, 2014, 34--43
2014Majumdar, Sanjib and Gorr, Bronislava and Christ, Hans-Jürgen and Schliephake, Daniel and Heilmaier, Martin: Oxidation mechanisms of lanthanum-alloyed {Mo--Si--B}. In: Corros. Sci., 88, 2014, 360--371
2013Majumdar, Sanjib and Burk, S and Schliephake, D and Krüger, M and Christ, H-J and Heilmaier, M: A study on effect of reactive and rare earth element additions on the oxidation behavior of {mo--Si--B} system. In: Oxid. Met., 80, 2013, 219--230
2013Vishwanadh, B and Naina, R H and Majumdar, S and Tewari, R and Dey, G K: A study on the oxidation behavior of Nb alloy (Nb-1 pct Zr-0.1 pct C) and silicide-coated Nb alloys. In: Metall. Mater. Trans. A, 44, 2013, 2258--2269
2013Majumdar, S and Schliephake, D and Gorr, B and Christ, H-J and Heilmaier, M: Effect of yttrium alloying on intermediate to high-temperature oxidation behavior of {mo-Si-B} alloys. In: Metall. Mater. Trans. A, 44, 2013, 2243--2257
2013Dutta, R S and Yusufali, C and Paul, B and Majumdar, S and Sengupta, P and Mishra, R K and Kaushik, C P and Kshirsagar, R J and Kulkarni, U D and Dey, G K: Formation of diffusion barrier coating on superalloy 690 substrate and its stability in borosilicate melt at elevated temperature. In: J. Nucl. Mater., 432, 2013, 72--77
2013Majumdar, S and Kumar, A and Schliephake, D and Christ, H-J and Jiang, X and Heilmaier, M: Microstructural and micro-mechanical properties of {Mo--Si--B} alloyed with {Y} and La. In: Mater. Sci. Eng. A Struct. Mater., 573, 2013, 257--263
2013Paul, Bhaskar and Majumdar, Sanjib and Suri, A K: Microstructure and mechanical properties of hot pressed {Mo--Cr--Si--Ti} in-situ composite, and oxidation behavior with silicide coatings. In: Int. J. Refract. Hard Met., 38, 2013, 26--34
2012Majumdar, S: Formation of {MoSi2} and Al doped {MoSi2} coatings on molybdenum base {TZM} ({Mo--0.5Ti--0.1Zr--0.02C}) alloy. In: Surf. Coat. Technol., 206, 2012, 3393--3398
2012Dutta, Rabi Sankar and Yusufali, Chelakkattu and Majumdar, Sanjib and Mishra, Raman Kumar and Kaushik, Chetan Parkash and Kshirsagar, Rohidas Jagannath and Kulkarni, Ulhas Digambar and Dey, Gautam Kumar: Thermally grown oxide layer on aluminized superalloy 690 substrate and its stability in nitrate-based environment. In: Mater. Sci. For., 710, 2012, 733--738
2011Dutta, R S and Majumdar, S and Limaye, P K and Kulkarni, U D and Dey, G K: Characterization of aluminides formed on superalloy 690 substrate. In: Trans. Indian Inst. Met., 64, 2011, 31--36
2011Dutta, R S and Majumdar, S and Laik, A and Singh, K and Kulkarni, U D and Sharma, I G and Dey, G K: Formation and characterization of aluminide coatings on alloy 800 substrate. In: Surf. Coat. Technol., 205, 2011, 4720--4725
2011Majumdar, S and Sharma, I G: Oxidation behavior of {MoSi2} and {Mo(Si}, Al)2 coated {Mo--0.5Ti--0.1Zr--0.02C} alloy. In: Intermetallics (Barking), 19, 2011, 541--545
2011Alex, Pamela and Majumdar, Sanjib and Kishor, Jugal and Sharma, Inderkumar G: Synthesis of cobalt nano crystals in aqueous media and its characterization. In: Mater. Sci. Appl., 02, 2011, 1307--1312
2010Majumdar, S and Arya, A and Sharma, I G and Suri, A K and Banerjee, S: Deposition of aluminide and silicide based protective coatings on niobium. In: Appl. Surf. Sci., 257, 2010, 635--640
2010Majumdar, S and Sharma, I G and Samajdar, I and Bhargava, P: Preparation of {Mo--Ti--Zr--C} alloy tube by {P/M} route. In: Nucl. Eng. Des., 240, 2010, 975--979
2009Majumdar, S and Kapoor, R and Raveendra, S and Sinha, H and Samajdar, I and Bhargava, P and Chakravartty, J K and Sharma, I G and Suri, A K: A study of hot deformation behavior and microstructural characterization of {Mo--TZM} alloy. In: J. Nucl. Mater., 385, 2009, 545--551
2009Majumdar, S and Sharma, I G and Raveendra, S and Samajdar, I and Bhargava, P and Tewari, R: A study on preparation of {Mo--0.6Ti--0.2Zr--0.02C} alloy by mechanical alloying and hot isostatic pressing, and its characterization. In: Mater. Chem. Phys., 113, 2009, 562--566
2009Majumdar, S and Raveendra, S and Samajdar, I and Bhargava, P and Sharma, I G: Densification and grain growth during isothermal sintering of Mo and mechanically alloyed {Mo--TZM}. In: Acta Mater., 57, 2009, 4158--4168
2008Majumdar, S and Sharma, I G and Bidaye, A C and Suri, A K: A study on isothermal kinetics of thermal decomposition of cobalt oxalate to cobalt. In: Thermochim. Acta, 473, 2008, 45--49
2008Majumdar, S and Sharma, I G and Suri, A K: Development of oxidation resistant coatings on {Mo--30W} alloy. In: Int. J. Refract. Hard Met., 26, 2008, 549--554
2008Majumdar, S and Sharma, I G and Raveendra, S and Samajdar, I and Bhargava, P: In situ chemical vapour co-deposition of Al and Si to form diffusion coatings on {TZM}. In: Mater. Sci. Eng. A Struct. Mater., 492, 2008, 211--217
2008Majumdar, S and Sharma, I G and Samajdar, I and Bhargava, P: Kinetic studies on hydrogen reduction of {MoO3} and morphological analysis of reduced mo powder. In: Metall. Mater. Trans. B, 39, 2008, 431--438
2008Majumdar, Sanjib and Sharma, Indrakumar and Samajdar, Indradev and Bhargava, Parag: Relationship between pack chemistry and growth of silicide coatings on {mo--TZM} alloy. In: J. Electrochem. Soc., 155, 2008, D734
2007Sharma, I G and Alex, Pamela and Majumdar, S and Kishor, Jugal and Suri, A K: A study on synthesis of fine size cobalt powder from fluoride compounds. In: J. Alloys Compd., 437, 2007, 231--237
2006Majumdar, S and Sengupta, P and Kale, G B and Sharma, I G: Development of multilayer oxidation resistant coatings on niobium and tantalum. In: Surf. Coat. Technol., 200, 2006, 3713--3718
2006Majumdar, S and Sharma, I G and Kapoor, R and Chakravartty, J K and Suri, A K: Studies on hot deformation of sintered cobalt. In: Metall. Mater. Trans. B, 37, 2006, 633--639
2005Majumdar, S and Kale, G B and Sharma, I G: A study on preparation of {Mo--30W} alloy by aluminothermic co-reduction of mixed oxides. In: J. Alloys Compd., 394, 2005, 168--175
2003Sharma, I G and Majumdar, S and Chakraborty, S P and Suri, A K: Aluminothermic preparation of {Hf--Ta} and {Nb--10Hf--1Ti} alloys and their characterization. In: J. Alloys Compd., 350, 2003, 184--190
2002Sharma, I G and Chakraborty, S P and Majumdar, S and Bidaye, A C and Suri, A K: A study on preparation of copper--niobium composite by aluminothermic reduction of mixed oxides. In: J. Alloys Compd., 336, 2002, 247--252